1- H. Shah Hosseini, M. Shamanian, and A.Kermanpur, "Characterization of
microstructures and mechanical properties ofInconel 617/310 stainless steel dissimilar
welds", Materials Characterization,Vol. 62,pp.425-431, 2011.
2- J.C. Lippold, and D. Koteki, "WeldingMetallurgy and Weldability of Stainles Steels",
John Wiley and Sons, New Jersey, 2005.
3- H. Naffakha, M. Shamaniana, and F.Ashrafizadeh, "Dissimilar Welding of AISI
310 Austenitic Stainless Steel to Nickel-BasedAlloy Inconel 657", Journal of Materials
Processing Technology, Vol. 209, 3628-3639,2008.
4- N. Arivazhagan,and S. S. Singh,"Investigation on AISI 304 Austenitic
Stainless Steel to AISI 4140 Low Alloy SteelDissimilar Joints by Gas Tungsten Arc,
Electron Beam and Friction Welding" ,Materials and Design, Vol. 32, pp. 3036–3050,
2011.
5- R.L. Klueh, and L. King, " AustenitictStainless Steel-Ferritic Steel Weld Joint
Failures", Welding Journal, Vol. 61, pp.302-311, 1982.
6- ASME Sec IX, "Qualification Standard forWelding and Brazing Procedure, Article II,
Welding Procedure Qualification", AmericanSociety of Mechanical Engineers, Edition: 2,
2001.
7- V. Kumslytis, A.V. Valiulis, and O.Cernasejus," The strength-related
characteristics of chromium molybdenum P5steel dependence on postweld heat treatment
parameters", Echanika, pp.27-30, 2008.
8- A.A. Omar, "Effects Of WeldingParameters On Hard Zone Formation At
Dissimilar Metal Welds", Welding Journal,Vol. 77, pp.86-93, 1998.
9- ASM Handbook, Volume 9,"Metallographyand Microstructures", ASM International,
Materials Park, Ohio, 2002.
10- R. Dehmolaie, M. Shamanian, and A.Kermanpour ,"Microstructural characterization
of dissimilar welds alloy 800 andHP heat–resistant steel",Materials Characterization ,
vol. 59, pp.1447-54, 2008.
11- H. Muesch, "Welding of material grade TP347", Nuclear Engineering and Design,Vol. 2,
pp.85:155-161, 2003.
12- M.J. Torkamany, J. Sabbaghzadeh, andM.J. Hamedi, "Effect of laser welding mode on
the microstructure and mechanicalperformance of dissimilar laser spot welds
between low carbon and austenitic stainlesssteels", Materials and Design, Vol. 34, pp .
666–672, 2011.
13- M. Tan, E. Akiyama, H. Habazaki, and A.Kawashima, "The role of chromium andmolybdenum in passivation of amorphous FeCr-Mo-P-Calloys in deaerated 1 MHCl",Corrosion Science, Vol. 38, pp.2137-2151, 1996.
14- G. Kaishu, X. Xiaodong, X. Hong, and W.Zhiwen, "Effect of aging at 700 °C on
precipitation and toughness of AISI 321 andAISI 347 austenitic stainless steel welds",
Nuclear Engineering and Design, Vol. 23,pp.2485–2494, 2005.
15- L. Li, and R. Messler, "Segregation ofPhosphorus and Sulfur in Heat-Affected Zone
Hot Cracking of Type 308 Stainless Steel",Welding Journal, pp.78-84, 2002 .
16- U. Anwar, M. Hani, and M. Tawancy,"Nureddin M. Abbas, Failure of weld jointsbetween carbon steel pipe and 304 stainlesssteel elbows" , Engineering Failure Analysis,Vol.12, pp.181–191, 2005.
)
