1- جی. وبر، تی. بیستک، "پوششهای تبدیلی شیمیایی والکترولیتی"، ص 247-322، ترجمه ع. افشار، انتشارات علمیدانشگاه صنعتی شریف، تهران، 1379.
2- Y. Huang, H. Shih, H. Huang, J. Daugherty,S. Wu, S. Ramanathan, C. Chang, F. Mansfeld,
"Evaluation of the Corrosion Resistance ofAnodized Aluminum 6061 using
Electrochemical Impedance Spectroscopy(EIS)", Corrosion Science, Vol. 50, pp. 3369-
3575, 2008.
3- G. E. Thompson, L. Zhang, C. J. E. Smith,P. Skeldon, “Boric Sulfuric Acid Anodizing of
Aluminum Alloys 2024 and 7075: FilmGrowth and Corrosion Resistance”, Corrosion
Science, Section 55, p. 11, 1999.
4- V. Moutarlier, M. P. Gigandet, J. Pagetti,"Characterisation of Pitting Corrosion in
Sealed Anodic Films Formed in Sulphuric,Sulphuric/Molybdate and Chromic Media",
Applied Surface Science, Vol. 206, pp. 237-249, 2003.
5- L. E. Fratila-Apachintei, F. D. Tichelaar, G.E. Thompson, H. Terryn, P. Skeldon, J.
Duszczyk, “A Transmission ElectronMicroscopy Study of Hard Anodic Oxide
Layers on AlSi(Cu) Alloys”, ElectrochimicaActa, Vol. 49, pp. 3169-3177, 2004.
6- A. Jagminas, D. Bigeliend, I. Mikulskas,“Growth Peculiarities of Aluminum Anodic
Oxide at High Voltages in Diluted PhosphoricAcid”, Journal of Crystal Growth, Vol. 233,pp. 591-598, 2001.
7- H. H. Shih, S. L. Tzou, “Study of AnodicOxidation of Aluminum in Mixed Acid using a
Pulsed Current”, Surface and CoatingTechnology, Vol. 124, pp. 278-285, 2000.
8- T. Takenaka, H. Habazaki, H. Konno,“Formation of Black Anodic Films on
Aluminum in Acid Electrolytes ContainingTitanium Complex Anion”, Surface andCoating Technology, Vol. 169/170, pp. 155-159, 2003.
9- J. S. Zhang, X. H. Zhao, Y. Zuo, J. P.Xiong, “The Bonding Strength and CorrosionResistance of Aluminum Alloy by AnodizingTreatment in a Phosphoric Acid Modified
Boric Acid/Sulfuric Acid Bath”, Surface andCoating Technology, Vol. 202, pp. 3149-3156,
2008.
10- V. Moutarlier, S. Pelletier, F. Lallemand,M. P. Gigandet, Z. Mekhalif ,
“Characterisation of the Anodic Layers formedon 2024 Aluminum Alloy, in TetraborateElectrolyte Containing Molybdate Ions”,Applied Surface Science, Vol. 252, pp. 1739-1746, 2005.
11- L. Song-mei, Z. Hong-rui, L. Jian-hua,“Corrosion Behavior of Aluminum Alloy
2024-T3 by 8-hydroxy-quinoline and itsDerivative in 3.5% Chloride Solution“,
Transactions of Nonferrous Metals Society ofChina, Vol. 17, pp. 318-325, 2007.
12- E. Ghali, “Corrosion Resistance ofAluminum and Magnesium Alloys”, Wiley,New Jersey, p. 137, 2010.
13- J. Ren, Y. Zuo, “Study of ElectrochemicalBehavior and Morphology of Pitting onAnodized 2024 Aluminum Alloy”, Surface andCoating Technology, Vol. 182, pp. 237-241,2004.
14- V. Moutarlier, M.P. Gigandet, B.Normand, J. Pagetti, “EIS characterisation ofanodic films formed on 2024 aluminium alloy,in sulphuric acid containing molybdate orpermanganate species”, Corrosion Science,Vol. 47, pp. 937-951, 2004
15- م. احتشام زاده، "مقدمه ای بر کاربرد طیف نگاریامپدانس الکتروشیمیایی (E.I.S) در مطالعه خوردگی"، ص.83، انتشارات دانشگاه شهید باهنر کرمان، کرمان، 1385.
16- J. J. Suay, E. Gimenez, T. Rodriguez, K.Habbib, J. J. Saura, “Characterization of
Anodized and Sealed Aluminum by EIS”,Corrosion Science, Vol. 45, pp. 611-624, 2003.
17- ASTM B 457, “Standard Test Method forMeasurement of Impedance of Anodic
Coatings on Aluminum”, ASTM Annual Bookof Standards, Vol. 192, Springer, 2003.
18- A. C. Crossland, H. Habazaki, K.Shumizu, P. Skeldon, G. E. Thompson, G. C.Wood, X. Zhou, C. J. E. Smith,“ResidualFlaws Due to Formation of Oxygen Bubbles in
Anodic Alumina”, Corrosion Science, Vol. 41,pp. 1945–1954, 1999.
)
