J. C. Ion, Laser Processing of Engineering Materials: Principles, Procedure and Industrial Application, Oxford: Butterworth-Heinemann, 2005, pp. 15-23.
|
N. B. Dahotre, Surface engineering series, volume 1, OH: ASM International, 1998.
|
|
J. D. Majumdar and I. Manna, Laser processing of materials, vol. 28, 2003, p. 495–562.
|
|
C. Li, Y. Wang, Z. Zang, B. Han and T. Han, "Influence of overlapping ratio on hardness and residual stress distributions in multi-track laser surface melting roller steel," Optics and Lasers in Engineering, vol. 48, no. 12, pp. 1224-1230, 2010.
|
|
N. S. Bailey, W. Tan and Y. C. Shin, "Predictive modeling and experimental results for residual stresses in laser hardening of AISI 4140 steel by a high power diode laser," Surface and Coating Technology, vol. 203, no. 14, pp. 2003-2012, 2009.
|
|
M. F. Ashby and K. E. Easterling, "The transformation hardening of steel surfaces by laser beams—I. Hypo-eutectoid steels," Acta Metallurgica, vol. 32, no. 11, p. 1935–1937, 1984.
|
|
T. W. Eagar and N. S. Tsai, "Temperature fields produced by traveling distributed heat sources," Welding Journal, vol. 62, no. 12, p. 346–355, 1983.
|
|
K. S. Bo and H. S. Cho, "Transient temperature distribution in arc welding of finite thickness plates," in Proceedings of the Institution of Mechanical Engineers, Part B: Engineering Manufacture, 204B3, p. 175–183, 1990.
|
|
S. M. Zubair and M. A. Chaudhry, "Heat conduction in a semi-infinite solid when subjected to spatially decaying instantaneous laser source," Wärme - und Stoffübertragung, vol. 28, no. 7, pp. 425-431, 1993.
|
|
M. K. Al-Adawi, M. A. Abdel-Naby and S. A. Shalaby, "Laser heating of a two-layer system with constant surface absorption: an exact solution," International Journal of Heat and Mass Transfer, vol. 38, no. 5, p. 947–952, 1995.
|
|
J. C. Rozzi, F. E. Pfefferkorn, F. P. Incropera and Y. C. Shin, "Transient thermal response of a rotating cylindrical silicon nitride workpiece subjected to a translating laser heat source, part II: parametric effects and assessment of a simplified model," ASME Journal of Heat Transfer, vol. 120, no. 4, p. 899–906, 1998.
|
|
N. T. Nguyen, A. Otha, K. Matsuoka, N. Suzuki and Y. Maeda, "Analytic solutions for transient temperature of semi-infinite body subjected to 3-D moving heat sources," Welding Journal, vol. 78, p. 265s–274s, 1999.
|
|
R. C. Reed and K. H. Bhadeshia, "A simple model for multipass steel welds," Acta Metallurgica et Materialia, vol. 42, no. 11, p. 3663–3678, 1994.
|
|
K. Mundra, T. DebRoy and K. M. Kelkar, "Numerical prediction of fluid flow and heat transfer in welding with a moving heat source," Numerical Heat Transfer, Part A: Applications: An International Journal of Computation and Methodology, vol. 29, no. 2, p. 115–129, 1996.
|
|
W. Jiang, K. Yahiaoui and F. R. Hall, "Finite element predictions of temperature distributions in a multipass welded piping branch junction," Journal of Pressure Vessels Technology, vol. 127, no. 1, p. 7–12, 2005.
|
|
R. Patwa and Y. C. Shin, "Predictive modeling of laser hardening of AISI5150H steels," International Journal of Machine Tools and Manufacture, vol. 47, no. 2, p. 307–320, 2007.
|
|
F. Kong, S. Santhanakrishnan, D. Lin and R. Kovacevic, "Modeling of temperature field and grain growth of a dual phase steel DP980 in direct diode laser heat treatment," Journal of Materials Processing Technology, vol. 209, no. 18-19, p. 5996–6003, 2009.
|
|
G. Fribourg, A. Deschampsa, Y. Brecheta, G. Mylonasb, G. Labeasb, U. Heckenbergerc and M. Perezd, "Microstructure modifications induced by a laser surface treatment in an AA7449 aluminium alloy," Materials Science and Engineering: A, vol. 528, no. 6, p. 2736–2747, 2011.
|
|
S. A. Jenabali Jahromi, A. Khajeh and B. Mahmoudi, "Effect of different pre-heat treatment processes on the hardness of AISI 410 martensitic stainless steels surface-treated using pulsed neodymium-doped yttrium aluminum garnet laser," Materials and Design, vol. 34, pp. 857-862, 2012.
|
|
B. Mahmoudi, A. Khajeh, M. J. Torkamany and S. A. Jenabali Jahromi, "The effect of microstructure before laser surface treatment on AISI410: martensitic stainless steel," Science of Advanced Materials, vol. 4, pp. 518-521, 2012.
|
|
B. Mahmoudi, M. J. Torkamany, A. R. Sabour Rouh Aghdam and J. Sabbaghzade, "Laser surface hardening of AISI 420 stainless steel treated by pulsed Nd:YAG laser," Materials and Design, vol. 31, p. 2553–2560, 2010.
|
|
B. V. Krishna and A. Bandyopadhyay, "Surface modification of AISI 410 stainless steel using laser engineered net shaping (LENSTM)," Materials and Design, vol. 30, no. 5, p. 1490–1496, 2009.
|
|
J. Radziejewska, "Influence of laser-mechanical treatment on surface topography, erosive wear and contact stiffness," Materials and Design, vol. 32, no. 10, p. 5073–5081, 2011.
|
|
C. Yao, B. Xu, J. Huang, P. Zhang and Y. Wu, "Study on the softening in overlapping zone by laser-overlapping scanning surface hardening for carbon and alloyed steel," Optics and lasers in engineering, vol. 48, no. 1, pp. 20-26, 2010.
|
|
A. N. Samanta, B. Dua, S. R. Paital, S. Kumarc and N. B. Dahotrea, "Pulsed laser surface treatment of magnesium alloy: Correlation between thermal model and experimental observations," Journal of Materials Processing Technology, vol. 209, no. 11, p. 5060–5067, 2009.
|
|
A. Chehrghania, M. J. Torkamany, M. J. Hamedi and J. Sabbaghzadeh, "Numerical modeling and experimental investigation of TiC formation on titanium surface pre-coated by graphite under pulsed laser irradiation," Applied Surface Science, vol. 258, no. 6, p. 2068–2076, 2012.
|
|
W. Piekarska, M. Kubiak and A. Bokota, "Numerical simulation of thermal phenomena and phase transformations in laser-arc hybrid welded joints," Archives of Metallurgy and Materials, vol. 56, no. 2, pp. 409-426, 2011.
|
|
W. Piekarska, M. Kubiak and Z. Saternus, "Application of Abaqus to analysis of the temperature field in elements heated by moving heat sources," Archives of Foundry Engineering, vol. 10, no. 4, pp. 177-182, 2010.
|
|
J. Caron, C. Heinze, C. Schwenk, M. Rethmeier, S. S. Babu and J. Lippold, "Effect of continuous cooling transformation variations on numerical calculation of welding-induced residual stresses," Welding Research, vol. 89, no. 1, pp. 151-160, 2010.
|
|
P. L. Masson, T. Loulou, E. Artioukhine, P. Rogeon, D. Carron and J. Quemener, "A numerical study for the estimation of a convection heat transfer coefficient during a metallurgical “Jominy end-quench” test," International Journal of Thermal Sciences, vol. 41, no. 6, p. 517–527, 2002.
|
|
W. Piekarska, M. Kubiak and Z. Saternus, "Numerical modeling of thermal and structural strain in laser welding process," Archives of Metallurgy and Materials, vol. 57, no. 4, pp. 1219-1227, 2012.
|
|
M. Kalyona and B. S. Yilbasa, "Laser pulse heating: a formulation of desired temperature at the surface," Optics and Lasers in Engineering, vol. 39, no. 1, p. 109–119, 2003.
|
|
J. S. Kirkaldy and D. Venugopalan, "Prediction of microstructure and hardenability in low-alloy steels," in Phase Transformations in Ferrous Alloys, Proceedings of the International Conference, Philadelphia, 1983.
|
|
J. S. Kirkaldy and R. C. Sharma, "A new phenomenology for steel IT and CCT curves," Scripta Metallurgica, vol. 16, no. 10, p. 1193–1198, 1982.
|
|
A. S. Oddy, J. M. J. McDill and L. Karlsson, "Microstructural predictions including arbitrary thermal histories, reaustenization and carbon segregation effects," Canadian Metallurgical Quarterly, vol. 35, no. 3, p. 275–283, 1996.
|
|
J. S. Kirkaldy, "Diffusion-controlled phase transformation in steels," Scandinavian Journal of Metallurgy, vol. 20, p. 50–61, 1991.
|
|
J. S. Kirkaldy, "Prediction of alloy hardenability from thermodynamic and kinetic data," Metallurgical Transactions, vol. 4, p. 2327–2333, 1973.
|
|
H. E. Boyer, Ed., Atlas of Isothermal Transformation and Cooling Transformation Diagrams, Metals Park, Ohio: Americal Society for Metal, 1977.
|
|
D. P. Koistinen and R. E. Marburger, "A general equation prescribing the extent of the austenite-martensite transformation in pure iron-carbon alloys and plain carbon steels," Acta Metallurgica, vol. 7, no. 1, p. 59–60, 1957.
|
|
W. C. Leslie, The Physical Metallurgy of Steels, New York: McGraw-Hill, 1981.
|
|
K. W. Andrews, "Empirical formulae for the calculation of some transformation temperatures," Journal of the Iron and Steel Institute, vol. 203, p. 721– 727, 1965.
|
|
P. Maynier, B. Jungmann and J. Dollet, "Creusot-Loire System for the prediction of the mechanical properties of low alloy steel products," in Hardenability Concepts with Applications to Steel, The Metallurgical Society of AIME, Chicago, 1978.
|
)
