سنتز نانو ذرات اکسید فلزی مس - قلع به روش انفجار الکتریکی سیم و بررسی خواص ضد باکتری آن

نوع مقاله : مقاله پژوهشی

نویسندگان

1 دانشجوی کارشناسی ارشد مهندسی مواد، دانشکده فنی مهندسی، دانشگاه بین المللی امام خمینی (ره)، قزوین، ایران

2 استادیار، دانشکده فنی و مهندسی، گروه مواد وسرامیک، دانشگاه بین المللی امام خمینی (ره)، قزوین، ایران

3 دانشیار، دانشکده فنی و مهندسی، گروه مهندسی بیوتکنولوژی، دانشگاه بین المللی امام خمینی (ره)، قزوین، ایران

چکیده

    به دلیل خواص فیزیکی- شیمیایی منحصر به فرد نانو ذرات در مهار رشد باکتری، پژوهش بر روی نانو ذرات و کاربردهایشان به عنوان عامل ضد میکروبی افزایش یافته است. در این بررسی نانو ذرات مس- قلع و اکسیدهای آن به روش انفجار الکتریکی در محیط آب بین الکترودهای مس- قلع سنتز شد. این روش امکان تهیه نانو ذرات اکسیدی و فلزی با نرخ تولید بالا و فعالیت سطحی زیاد را فراهم می­آورد. نانو ذرات اکسید مس و اکسید قلع به عنوان نانو ذرات کاربردی با فعالیت ضد باکتری موثر شناخته شده­اند. مشخصه­یابی نانو ذرات ساخته شده با استفاده از تکنیک پراش پرتو ایکس، طیف سنج مرئی- فرابنفش، میکروسکوپ الکترونی روبشی و آنالیز BET  انجام شد. نتایج  نشان داد با تغییر شدت جریان اعمالی، نانوذرات اکسید مس - قلع با اندازه میانگین حدود ۱۹ تا 5/37 نانومتر به روش انفجار الکتریکی سیم تشکیل شدند. فعالیت ضد باکتری نانوذرات در برابر باکتری اشرشیاکولی با استفاده از غلظت­های مختلف نمونه­های نانو ذرات اکسید مس- قلع  به روش تعیین چگالی نوری مورد بررسی قرار گرفت. نتایج نشان دادند که نانو ذرات اکسید مس- قلع دارای خاصیت ضد باکتری هستند و این خاصیت با افزایش غلظت نانو ذره در محیط مایع و کاهش متوسط اندازه دانه، افزایش می­یابد.

کلیدواژه‌ها


عنوان مقاله [English]

Synthesis of copper-tin metal oxide nanoparticles by the electrical explosion wire method and investigation antibacterial properties

نویسندگان [English]

  • D. Yarali 1
  • R. Ahmadi 2
  • R. Hosseini 3
1 Student Materials Engineering - Identification and Selection of Engineering Materials , Imam Khomeini University of Qazvin - Iran
2 -Department of Materials Engineering, Imam Khomeini International University, Qazvin, Iran
3 Department of Biotechnology, Faculty of Agriculture and Natural Resources, Imam Khomeini University, Qazvin, Iran
چکیده [English]

     Due to the unique physicochemical properties of nanoparticles with the ability to inhibit the growth of bacteria, research has increased on nanoparticles and their applications as the antimicrobial agents. In this study, nanoparticles of copper - tin oxide were synthesized via
electrical explosion in water between copper-tin electrodes. This method provides the possibility of producing oxide and metal nanoparticles with high production rates and high surface activity. Copper oxide and tin oxide nanoparticles are known as practical nanoparticles with antibacterial activity. Nanoparticles characterization was performed using the X-ray diffraction, scanning electron microscopy, UV-visible absorption recording and BET analysis. The results showed that by changing the intensity of the applied current, oxide copper - tin with an average size of about 19 to 37.5 nm were formed by electrical explosion of wire. Antibacterial activity of nanoparticles against the E. coli bacteria was evaluated by determining the optical density of various samples with different concentrations of tin and copper oxide nanoparticles. The results showed that the copper - tin oxide nanoparticles possess antibacterial properties and this activity enhances by increasing the concentration of nanoparticles in the liquid medium and reduction the average grain size.

کلیدواژه‌ها [English]

  • Electrical explosion of wire
  • Nanoparticles
  • Copper – tin oxide
  • Antibacterial
References:
1- O. Yamamoto, “Influence of particle size on the antibacterial activity of zinc oxide,” International Journal of Inorganic Materials, vol. 3, no. 7, pp. 643-646, 2001.
 
2- Q. Li, S. Mahendra, D. Y. Lyon, L. Brunet, M. V. Liga, D. Li, and P. J. Alvarez, “Antimicrobial nanomaterials for water disinfection and microbial control: potential applications and implications,” Water research, vol. 42, no. 18, pp. 4591-4602, 2008.
 
3- L. Zhang, Y. Jiang, Y. Ding, M. Povey, and D. York, “Investigation into the antibacterial behaviour of suspensions of ZnO nanoparticles (ZnO nanofluids),” Journal of Nanoparticle Research, vol. 9, no. 3, pp. 479-489, 2007.
 
4- C. Karunakaran, S. SakthiRaadha, and P. Gomathisankar, “Photocatalytic and bactericidal activities of hydrothermally and sonochemically prepared Fe2O3–SnO2 nanoparticles,” Materials Science in Semiconductor Processing, vol. 16, no. 3, pp. 818-824, 2013.
 
5- M. Fernandez-Garcia, A. Martinez-Arias, J. Hanson, and J. Rodriguez, “Nanostructured oxides in chemistry: characterization and properties,” Chemical Reviews, vol. 104, no. 9, pp. 4063-4104, 2004.
 
6- M. Trudeau, and J. Ying, “Nanocrystalline materials in catalysis and electrocatalysis: structure tailoring and surface reactivity,” Nanostructured Materials, vol. 7, no. 1, pp. 245-258, 1996.
 
7- M. Bäumer, and H.-J. Freund, “Metal deposits on well-ordered oxide films,” Progress in Surface Science, vol. 61, no. 7, pp. 127-198, 1999.
 
8- R. Katwal, H. Kaur, G. Sharma, M. Naushad, and D. Pathania, “Electrochemical synthesized copper oxide nanoparticles for enhanced photocatalytic and antimicrobial activity,” Journal of Industrial and Engineering Chemistry, vol. 31, pp. 173-184, 2015.
 
9- K. Niraimathi, R. Lavanya, V. Sudha, R. Narendran, and P. Brindha, “Bio-Reductive Synthesis and Characterization of Copper Oxide Nanoparticles (CuONPs) Using Alternanthera sessilis Linn. Leaf Extract,” Journal of Pharmacy Research Vol, vol. 10, no. 1, pp. 29-32, 2016.
 
10- N. Mittapelly, K. Mukkanti, and B. Reguri, “Copper oxide nanoparticles-catalyzed direct N-alkylation of amines with alcohols,” Der Pharma Chemica, vol. 3, no. 4, pp. 180-189, 2011.
 
11- H. Hsueh, T. Hsueh, S. Chang, F. Hung, T. Tsai, W. Weng, C. Hsu, and B. Dai, “CuO nanowire-based humidity sensors prepared on glass substrate,” Sensors and Actuators B: Chemical, vol. 156, no. 2, pp. 906-911, 2011.
 
12- Y.-S. He, J. C. Campbell, R. C. Murphy, M. Arendt, and J. S. Swinnea, “Electrical and optical characterization of Sb: SnO2,” Journal of Materials Research, vol. 8, no. 12, pp. 3131-3134, 1993.
 
13- C. Xue, Y.-c. Shu, Y.-n. Hu, G.-p. Li, and L. Chang, “Integrated process of large-scale and size-controlled SnO2 nanoparticles by hydrothermal method,” Transactions of Nonferrous Metals Society of China, vol. 23, no. 3, pp. 725-730, 2013.
 
14- ر. معمارزاده، س.جوادپور و ف. پناهی، ” بهینه سازی عوامل موءثر بر اندازه نانو ذرات اکسید قلع به روش تاگوچی“، مجله مواد نوین، جلد3، شماره 7، صفحه 20-11، بهار 1391 .
15- S. Ferrere, A. Zaban, and B. A. Gregg, “Dye sensitization of nanocrystalline tin oxide by perylene derivatives,” The Journal of Physical Chemistry B, vol. 101, no. 23, pp. 4490-4493, 1997.
 
16- V. Vidhu, and D. Philip, “Biogenic synthesis of SnO 2 nanoparticles: Evaluation of antibacterial and antioxidant activities,” Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, vol. 134, pp. 372-379, 2015.
 
17- S. Singh, N. Verma, A. Singh, and B. Yadav, “Synthesis and characterization of  CuO–SnO2 nanocomposite and its application as liquefied petroleum gas sensor,” Materials Science in Semiconductor Processing, vol. 18, pp. 88-96, 2014.
 
18- A. A. Ashkarran, “A novel method for synthesis of colloidal silver nanoparticles by arc discharge in liquid,” Current Applied Physics, vol. 10, no. 6, pp. 1442-1447, 2010.
 
19- M. Gazanfari, M. Karimzadeh, S. Ghorbani, M. Sadeghi, G. Azizi, H. Karimi, N. Fattahi, and Z. Karimzadeh, “Synthesis of aluminium nanoparticles by arc evaporation of an aluminium cathode surface,” Bulletin of Materials Science, vol. 37, no. 4, pp. 871-876, 2014.
 
20- Q. H. Tran, and A.-T. Le, “Silver nanoparticles: synthesis, properties, toxicology, applications and perspectives,” Advances in Natural Sciences: Nanoscience and Nanotechnology, vol. 4, no. 3, pp. 033001, 2013.
 
21- A. Ashkarran, “Metal and metal oxide nanostructures prepared by electrical arc discharge method in liquids,” Journal of Cluster Science, vol. 22, no. 2, pp. 233, 2011.
22- Y.A. Kotov, “Electric Explosion of Wires as a Method for Preparation of Nanopowders”, Journal of Nanoparticle Research, 5, 539-550, 2003.
 
23- H. Khalid, S. Shamaila, N. Zafar, and S. Shahzadi, “synthesis of copper nanoparticle by chemical reduction method,” Science International, vol. 27, no. 4, 2015.
 
24- T. Jan, J. Iqbal, M. Ismail, N. Badshah, Q. Mansoor, A. Arshad, and Q. M. Ahkam, “Synthesis, physical properties and antibacterial activity of metal oxides nanostructures,” Materials Science in Semiconductor Processing, vol. 21, pp. 154-160, 2014.
 
25- N. Talebian, and F. Jafarinezhad, “Morphology-controlled synthesis of SnO2 nanostructures using hydrothermal method and their photocatalytic applications,” Ceramics International, vol. 39, no. 7, pp. 8311-8317, 2013.
 
26- T. Jan, J. Iqbal, U. Farooq, A. Gul, R. Abbasi, I. Ahmad, and M. Malik, “Structural, Raman and optical characteristics of Sn doped CuO nanostructures: A novel anticancer agent,” Ceramics International, vol. 41, no. 10, pp. 13074-13079, 2015.
 
27- I. Subhankari and P. L. Nayak, “Antimicrobial activity of copper nanoparticles synthesised by ginger (Zingiber officinale) extract,” World Journal of Nano Science & Technology, vol. 2, no. 1, pp. 10-13, 2013.
 
28- A. A. Ashkarran, M. Ghavami, H. Aghaverdi, P. Stroeve, and M. Mahmoudi, “Bacterial effects and protein corona evaluations: crucial ignored factors in the prediction of bio-efficacy of various forms of silver nanoparticles,” Chemical research in toxicology, vol. 25, no. 6, pp. 1231-1242, 2012.
29- M. J. Hajipour, K. M. Fromm, A. A. Ashkarran, D. J. de Aberasturi, I. R. de Larramendi, T. Rojo, V. Serpooshan, W. J. Parak, and M. Mahmoudi, “Antibacterial properties of nanoparticles,” Trends in biotechnology, vol. 30, no. 10, pp. 499-511, 2012.
 
30- G. Sharma, D. Pathania, and M. Naushad, “Preparation, characterization and antimicrobial activity of biopolymer based nanocomposite ion exchanger pectin zirconium (IV) selenotungstophosphate: application for removal of toxic metals,” Journal of Industrial and Engineering Chemistry, vol. 20, no. 6, pp. 4482-4490, 2014.
 
31- C. Peng, J. Wang, N. Zhou, and G. Sun, “Fabrication of nanopowders by electrical explosion of a copper wire in water,” Current Applied Physics, vol. 16, no. 3, pp. 284-287, 2016.
 
32- X. Li, R. Deng, Y. Li, B. Yao, Z. Ding, J. Qin, and Q. Liang, “Effect of Mg doping on optical and electrical properties of SnO2 thin films: An experiment and first-principles study,” Ceramics International, vol. 42, no. 4, pp. 5299-5303, 2016.
 
33- M. Zhou, Z. Wei, H. Qiao, L. Zhu, H. Yang, and T. Xia, “Particle size and pore structure characterization of silver nanoparticles prepared by confined arc plasma,” Journal of Nanomaterials, vol. 3,  p. 3, 2009.
 
34- A. Kar, S. Sain, S. Kundu, A. Bhattacharyya, S. Kumar Pradhan, and A. Patra, “Influence of size and shape on the photocatalytic properties of SnO2 nanocrystals,” ChemPhysChem, vol. 16, no. 5, pp. 1017-1025, 2015.
 
35- C.-H. Kuo, C.-H. Chen, and M. H. Huang, “Seed-mediated synthesis of monodispersed Cu2O nanocubes with five different size ranges from 40 to 420 nm,” Advanced Functional Materials, vol. 17, no. 18, pp. 3773, 2007.
36- Y. Zhang, B. Deng, T. Zhang, D. Gao, and A.-W. Xu, “Shape effects of Cu2O polyhedral microcrystals on photocatalytic activity,” The Journal of Physical Chemistry C, vol. 114, no. 11, pp. 5073-5079, 2010.
 
37- S. Jadhav, S. Gaikwad, M. Nimse, and A. Rajbhoj, “Copper oxide nanoparticles: synthesis, characterization and their antibacterial activity,” Journal of Cluster Science, vol. 22, no. 2, pp. 121-129, 2011.    
 
38- Y. K. Young, J. H. Byeon, J. H. Park, and J. Hwang, “Susceptibility constants of Escherichia coli and Bacillus subtilis to silver and copper nanoparticles,” Science of the Total Environment, vol.  373, no. 2  pp. 572-575, 2007.
 
39- Y. N. Chang, M. Zhang, L. Xia, J. Zhang, and G. Xing, “The toxic effects and mechanisms of CuO and ZnO nanoparticles,” Materials, vol. 5, no. 12, pp. 2850-2871, 2012.
 
40- G. Subbiahdoss, S. Sharifi, D. W. Grijpma, S. Laurent, H. C. van der Mei, M. Mahmoudi, and H. J. Busscher, “Magnetic targeting of surface-modified superparamagnetic iron oxide nanoparticles yields antibacterial efficacy against biofilms of gentamicin-resistant staphylococci,” Acta biomaterialia, vol. 8, no. 6, pp. 2047-2055, 2012.
 
41- A. Sirelkhatim, S. Mahmud, A. Seeni, N. H. M. Kaus, L. C. Ann, S. K. M. Bakhori, H. Hasan, and D. Mohamad, “Review on zinc oxide nanoparticles: antibacterial activity and toxicity mechanism,” Nano-Micro Letters, vol. 7, no. 3, pp. 219-242, 2015.
 
42- V. K. Vidhu, and D. Philip,. “Phytosynthesis and applications of bioactive SnO 2 nanoparticles,” Materials Characterization, vol. 101, pp. 97-105, 2015.