A
-
Aboutalebi, Gholam Reza
Effect of Various Heat Treatment Conditions on Nickel Ferrite Nanoparticles and Investigating its Sensitivity to Formaldehyde [Volume 11, Issue 42, 2021, Pages 17-30]
-
Adeli, Mandana
The application of combustion synthesis reactions in Ni-Ti system in the joining of steel to tungsten carbide [Volume 11, Issue 41, 2021, Pages 103-114]
-
Amir Abadizadeh, Seyed Reza
Effects of the Replacement Vanadium to Niobium at E347-16 Electrode on Micro-structure and Corrosion Behaviors of Weld Metal [Volume 11, Issue 39, 2020, Pages 31-42]
-
Amiri, Gholam Reza
Effect of Various Heat Treatment Conditions on Nickel Ferrite Nanoparticles and Investigating its Sensitivity to Formaldehyde [Volume 11, Issue 42, 2021, Pages 17-30]
-
Asadi, Javad
Effect of bonding time and temperature on microstructure of GTD-111/ BNi-3 /GTD-111 system
during the Transient Liquid Phase (TLP) [Volume 11, Issue 39, 2020, Pages 91-108]
-
Azadeh, Maryam
Synthesis and Characterization of Activated Carbon from Rice husk [Volume 11, Issue 40, 2020, Pages 125-136]
B
-
Babaiee, Mohsen
Effect of Neodymium and Yttrium oxides on the Structural and Electrochemical Properties of LiFePO4/C Composite as Cathode of lithium ion Batteries Synthesized by Solid State Method [Volume 11, Issue 42, 2021, Pages 107-122]
-
Bahrami-fard, Bahar
A comparative study on the effect of electrodeposition current density on the grain size of Ni and Ni-W nanocrystalline coatings [Volume 11, Issue 40, 2020, Pages 33-44]
D
-
Daneshmand, saeed
Effect of Various Heat Treatment Conditions on Nickel Ferrite Nanoparticles and Investigating its Sensitivity to Formaldehyde [Volume 11, Issue 42, 2021, Pages 17-30]
-
Doniavi, Ali
Investigation of the reduction in area and twist angle effects on the strain distribution, damage and process load of vortex extrusion die [Volume 11, Issue 42, 2021, Pages 95-106]
E
-
Ebrahimi, Gholam reza
Study on hot deformation behaviuor of Mg-7.1Gd-2.8Y-1.3Nd-0.4Zn magnesium alloy using hyperbolic sine equation and processing maps [Volume 11, Issue 39, 2020, Pages 61-76]
-
Ebrahimi, Hamid Reza
Effect of Various Heat Treatment Conditions on Nickel Ferrite Nanoparticles and Investigating its Sensitivity to Formaldehyde [Volume 11, Issue 42, 2021, Pages 17-30]
-
Emami, Hosein
Effect of Various Heat Treatment Conditions on Nickel Ferrite Nanoparticles and Investigating its Sensitivity to Formaldehyde [Volume 11, Issue 42, 2021, Pages 17-30]
-
Eskandari, Mostafa
Study on microstructure and mechanical properties of API X70 steel at various hot rolling conditions [Volume 11, Issue 41, 2021, Pages 79-90]
F
-
FARHADIMANESH, MEHRDAD
Fabrication and characterization of developed polysulfone hollow fiber membranes for dehydration of gas streams via gas-liquid membrane contactor [Volume 11, Issue 40, 2020, Pages 45-58]
G
-
Gandomkar, Mojtaba
Deposition, Characterization and Investigation of Photo-Electrical Properties of Nanostructured Thin Film Mg Doped ZnO by Sol-Gel Method [Volume 11, Issue 40, 2020, Pages 107-124]
-
Ganjeh, Esmaeil
Investigation of effective parameters on dissimilar infrared brazing for Ti-6Al-4Vv and SS316 L by Ag Base filler metal [Volume 11, Issue 41, 2021, Pages 1-16]
-
Ghalandari, Laleh
Mechanical and Corrosion Properties of Graphene Oxide-Copper Nano-composites produced by the accumulative Roll Bonding (ARB) method [Volume 11, Issue 39, 2020, Pages 43-60]
-
Ghasemzadeh, Mohammad
Investigation of effective parameters on dissimilar infrared brazing for Ti-6Al-4Vv and SS316 L by Ag Base filler metal [Volume 11, Issue 41, 2021, Pages 1-16]
-
Gheisari, Khalilollah
The Effect of Oblique Deposition on the Magnetic Behavior of Fe-Co Alloy Thin Films Fabricated by Sputtering Technique [Volume 11, Issue 42, 2021, Pages 31-44]
H
-
Haghighi, ٰVida
Fabrication and Evaluation of Surface and Biodegradable Properties of Polycaprolactone/Keratin Nanofibers Scaffolds containing Carbon Nanotube for Use in Bone Tissue Engineering [Volume 11, Issue 39, 2020, Pages 15-30]
-
Hashemi, Babak
Effect of Neodymium and Yttrium oxides on the Structural and Electrochemical Properties of LiFePO4/C Composite as Cathode of lithium ion Batteries Synthesized by Solid State Method [Volume 11, Issue 42, 2021, Pages 107-122]
-
Heidary Moghadam, Ali
Deposition, Characterization and Investigation of Photo-Electrical Properties of Nanostructured Thin Film Mg Doped ZnO by Sol-Gel Method [Volume 11, Issue 40, 2020, Pages 107-124]
-
HOSSEINI, SEYEDVAHID
Root Cause Analysis of Water-Cooled Exhaust Manifold in High Speed Marine Diesel Engine [Volume 11, Issue 42, 2021, Pages 1-16]
J
-
Javadi, Mehrdad
Effect of severe plastic deformation process on mechanical properties of 1.7225 Steel [Volume 11, Issue 41, 2021, Pages 35-48]
K
-
Karimi, Alireza
The application of combustion synthesis reactions in Ni-Ti system in the joining of steel to tungsten carbide [Volume 11, Issue 41, 2021, Pages 103-114]
-
Kazeminezhad, Mohsen
The effect of temperature on microstructure during ultra-rapid annealing of severely deformed low-carbon steel [Volume 11, Issue 40, 2020, Pages 1-12]
-
Khalaj, Gholamreza
Synthesis of FeCo alloyed nanoparticles with different weight ratios via microemulsion route and studying the magnetic properties [Volume 11, Issue 42, 2021, Pages 45-62]
M
-
MANSOURIZADEH, AMIR
Fabrication and characterization of developed polysulfone hollow fiber membranes for dehydration of gas streams via gas-liquid membrane contactor [Volume 11, Issue 40, 2020, Pages 45-58]
-
Mirhaj, Marjan
Fabrication and Evaluation of Surface and Biodegradable Properties of Polycaprolactone/Keratin Nanofibers Scaffolds containing Carbon Nanotube for Use in Bone Tissue Engineering [Volume 11, Issue 39, 2020, Pages 15-30]
-
Mojir Sheibani, Parman
Synthesis and Characterization of Activated Carbon from Rice husk [Volume 11, Issue 40, 2020, Pages 125-136]
-
Mostafaei, Mohammad Ali
The effect of temperature on microstructure during ultra-rapid annealing of severely deformed low-carbon steel [Volume 11, Issue 40, 2020, Pages 1-12]
N
-
Najafi, Abolhassan
Synthesis of FeCo alloyed nanoparticles with different weight ratios via microemulsion route and studying the magnetic properties [Volume 11, Issue 42, 2021, Pages 45-62]
-
Nematipour, Kourosh
Synthesis of FeCo alloyed nanoparticles with different weight ratios via microemulsion route and studying the magnetic properties [Volume 11, Issue 42, 2021, Pages 45-62]
-
Nooryan, Mohammadreza
Fabrication of Cu-Al2O3 composite tubes through electroforming process and investigation on the effect of alumina particles on corrosion resistance of the tubes [Volume 11, Issue 41, 2021, Pages 63-78]
O
-
Omidvar, Hamid
Effect of bonding time and temperature on microstructure of GTD-111/ BNi-3 /GTD-111 system
during the Transient Liquid Phase (TLP) [Volume 11, Issue 39, 2020, Pages 91-108]
-
Omodifard, M.A.
Effect of Neodymium and Yttrium oxides on the Structural and Electrochemical Properties of LiFePO4/C Composite as Cathode of lithium ion Batteries Synthesized by Solid State Method [Volume 11, Issue 42, 2021, Pages 107-122]
-
Ong, Chong Kim
The Effect of Co Concentration on the Magnetic Properties of Obliquely Sputtered Fe–Co Thin Films [Volume 11, Issue 41, 2021, Pages 91-102]
-
Ong, Chong Kim
The Effect of Oblique Deposition on the Magnetic Behavior of Fe-Co Alloy Thin Films Fabricated by Sputtering Technique [Volume 11, Issue 42, 2021, Pages 31-44]
P
-
Pakzaman, Hamid Reza
Investigation of abnormal tensile behavior of DIN 16MnCr5 low carbon low alloy steel under ferrite-martensite dual-phase microstructures in comparison with full martensitic condition [Volume 11, Issue 41, 2021, Pages 17-34]
-
Pashangeh, Shima
Superior improvement of tensile properties in a low alloy medium silicon DIN 1.5025 steel under single step quenching and partitioning heat treatment compared to fully martensitic conditions [Volume 11, Issue 40, 2020, Pages 59-74]
-
Paydar, Mohammad Hossein
Aluminothermic Reduction of Khatoon Abad Molybdenum Trioxide in Microwave: Investigation on the Effect of Aluminum Particle Size and Scale-up on the Reduction Process [Volume 11, Issue 40, 2020, Pages 91-106]
-
Paydar, Mohammad Hossein
Fabrication of Cu-Al2O3 composite tubes through electroforming process and investigation on the effect of alumina particles on corrosion resistance of the tubes [Volume 11, Issue 41, 2021, Pages 63-78]
R
-
Ranjbari, Gohar
Investigation of the reduction in area and twist angle effects on the strain distribution, damage and process load of vortex extrusion die [Volume 11, Issue 42, 2021, Pages 95-106]
-
RASAVI, HOSAIEN
Investigation of High Frequency Resistance Welding (HFRW) Variables on microstructure and mechanical properties of dissimilar joints between chromium-molybdenum low alloy steel tubes to chromium high alloy steels [Volume 11, Issue 39, 2020, Pages 1-15]
-
Rashidi, Ali Mohammad
A comparative study on the effect of electrodeposition current density on the grain size of Ni and Ni-W nanocrystalline coatings [Volume 11, Issue 40, 2020, Pages 33-44]
-
Razaghian Arani, Ahmad
Synthesis of nickel-cobalt-aluminum/graphene nanocomposite and its
electrochemical performance as supercapacitor [Volume 11, Issue 42, 2021, Pages 63-80]
-
Rezaei, Mehdi
Study on microstructure and mechanical properties of API X70 steel at various hot rolling conditions [Volume 11, Issue 41, 2021, Pages 79-90]
-
Rezaeii Kheybari, Ehsan
Study on hot deformation behaviuor of Mg-7.1Gd-2.8Y-1.3Nd-0.4Zn magnesium alloy using hyperbolic sine equation and processing maps [Volume 11, Issue 39, 2020, Pages 61-76]
S
-
Saberi Sani, Gholam Reza
Effects of the Replacement Vanadium to Niobium at E347-16 Electrode on Micro-structure and Corrosion Behaviors of Weld Metal [Volume 11, Issue 39, 2020, Pages 31-42]
-
Sabet, Hamed
Investigation of High Frequency Resistance Welding (HFRW) Variables on microstructure and mechanical properties of dissimilar joints between chromium-molybdenum low alloy steel tubes to chromium high alloy steels [Volume 11, Issue 39, 2020, Pages 1-15]
-
Sabet, Hamed
Effects of the Replacement Vanadium to Niobium at E347-16 Electrode on Micro-structure and Corrosion Behaviors of Weld Metal [Volume 11, Issue 39, 2020, Pages 31-42]
-
SADEGHI, MOHAMMAD
Investigation of High Frequency Resistance Welding (HFRW) Variables on microstructure and mechanical properties of dissimilar joints between chromium-molybdenum low alloy steel tubes to chromium high alloy steels [Volume 11, Issue 39, 2020, Pages 1-15]
-
Saghafi, Ali-Akbar
Root Cause Analysis of Water-Cooled Exhaust Manifold in High Speed Marine Diesel Engine [Volume 11, Issue 42, 2021, Pages 1-16]
-
Saghafi Yazdi, Morteza
Synthesis of nickel-cobalt-aluminum/graphene nanocomposite and its
electrochemical performance as supercapacitor [Volume 11, Issue 42, 2021, Pages 63-80]
-
Sajjadi, Seyed Abdolkarim
Effect of bonding time and temperature on microstructure of GTD-111/ BNi-3 /GTD-111 system
during the Transient Liquid Phase (TLP) [Volume 11, Issue 39, 2020, Pages 91-108]
-
Sani, Razieh
Preparation and evaluation of mechanical behavior of nanostructure Ni-P/Al2O3-SiC composite coating [Volume 11, Issue 39, 2020, Pages 109-120]
-
Setoudeh, Nader
A review on the extraction of lithium from its minerals - Case study: Lithium extraction from spodumene concentrate using sulfation roasting under ball milling conditions [Volume 11, Issue 40, 2020, Pages 75-90]
-
Shahbaz, Mehrdad
Investigation of the reduction in area and twist angle effects on the strain distribution, damage and process load of vortex extrusion die [Volume 11, Issue 42, 2021, Pages 95-106]
-
Shariat, Mohammad Hossein
Aluminothermic Reduction of Khatoon Abad Molybdenum Trioxide in Microwave: Investigation on the Effect of Aluminum Particle Size and Scale-up on the Reduction Process [Volume 11, Issue 40, 2020, Pages 91-106]
-
Sheybani Tezerji, Kazem
Aluminothermic Reduction of Khatoon Abad Molybdenum Trioxide in Microwave: Investigation on the Effect of Aluminum Particle Size and Scale-up on the Reduction Process [Volume 11, Issue 40, 2020, Pages 91-106]
-
Soltanieh, Mansour
The application of combustion synthesis reactions in Ni-Ti system in the joining of steel to tungsten carbide [Volume 11, Issue 41, 2021, Pages 103-114]
T
-
Tafakh, sahereh
Deposition, Characterization and Investigation of Photo-Electrical Properties of Nanostructured Thin Film Mg Doped ZnO by Sol-Gel Method [Volume 11, Issue 40, 2020, Pages 107-124]
-
Tajbakhsh, Parisa
Mechanical and Corrosion Properties of Graphene Oxide-Copper Nano-composites produced by the accumulative Roll Bonding (ARB) method [Volume 11, Issue 39, 2020, Pages 43-60]
V
-
Vahedi, Samaneh
Synthesis of nickel-cobalt-aluminum/graphene nanocomposite and its
electrochemical performance as supercapacitor [Volume 11, Issue 42, 2021, Pages 63-80]
W
-
Welham, Nicholas J.
A review on the extraction of lithium from its minerals - Case study: Lithium extraction from spodumene concentrate using sulfation roasting under ball milling conditions [Volume 11, Issue 40, 2020, Pages 75-90]
Z
-
Zamani, Cyrus
Synthesis and Characterization of Activated Carbon from Rice husk [Volume 11, Issue 40, 2020, Pages 125-136]
-
Zare Dehnov, Fatemeh
Synthesis of porous hydroxyapatite nano particles via sol-gel route by using different organic polymers [Volume 11, Issue 41, 2021, Pages 49-62]
-
Zareiinejad, Sara
Preparation and evaluation of mechanical behavior of nanostructure Ni-P/Al2O3-SiC composite coating [Volume 11, Issue 39, 2020, Pages 109-120]
Your query does not match with any item