A
-
Activated Carbon
Synthesis and Characterization of Activated Carbon from Rice husk [Volume 11, Issue 40, 2021, Pages 125-136]
-
Ag filler
Investigation of effective parameters on dissimilar infrared brazing for Ti-6Al-4Vv and SS316 L by Ag Base filler metal [Volume 11, Issue 41, 2021, Pages 1-16]
-
Aluminothermic reduction
Aluminothermic Reduction of Khatoon Abad Molybdenum Trioxide in Microwave: Investigation on the Effect of Aluminum Particle Size and Scale-up on the Reduction Process [Volume 11, Issue 40, 2021, Pages 91-106]
-
API X70 steel
Study on microstructure and mechanical properties of API X70 steel at various hot rolling conditions [Volume 11, Issue 41, 2021, Pages 79-90]
-
ASZ
Effect of bonding time and temperature on microstructure of GTD-111/ BNi-3 /GTD-111 system
during the Transient Liquid Phase (TLP) [Volume 11, Issue 39, 2021, Pages 91-108]
B
-
Ball milling
A review on the extraction of lithium from its minerals - Case study: Lithium extraction from spodumene concentrate using sulfation roasting under ball milling conditions [Volume 11, Issue 40, 2021, Pages 75-90]
C
-
Carbide decomposition reaction
Tracing the creep lifetime degradation of IN738LC superalloy based on the primary carbide decomposition reaction and composition changes in the carbide regions [Volume 11, Issue 42, 2021, Pages 81-94]
-
Cavity Nucleation
Root Cause Analysis of Water-Cooled Exhaust Manifold in High Speed Marine Diesel Engine [Volume 11, Issue 42, 2021, Pages 1-16]
-
Chitosan
Synthesis of porous hydroxyapatite nano particles via sol-gel route by using different organic polymers [Volume 11, Issue 41, 2021, Pages 49-62]
-
Combination of strength and ductility
Investigation of abnormal tensile behavior of DIN 16MnCr5 low carbon low alloy steel under ferrite-martensite dual-phase microstructures in comparison with full martensitic condition [Volume 11, Issue 41, 2021, Pages 17-34]
-
Combustion Synthesis
The application of combustion synthesis reactions in Ni-Ti system in the joining of steel to tungsten carbide [Volume 11, Issue 41, 2021, Pages 103-114]
-
Corrosion
Effects of the Replacement Vanadium to Niobium at E347-16 Electrode on Micro-structure and Corrosion Behaviors of Weld Metal [Volume 11, Issue 39, 2021, Pages 31-42]
-
Critical Temperature
The effect of temperature on microstructure during ultra-rapid annealing of severely deformed low-carbon steel [Volume 11, Issue 40, 2021, Pages 1-12]
-
Cu-Al2O3 composites, tubes, Alumina particles, corrosion resistance
Fabrication of Cu-Al2O3 composite tubes through electroforming process and investigation on the effect of alumina particles on corrosion resistance of the tubes [Volume 11, Issue 41, 2021, Pages 63-78]
-
Curvature of slip lines
Investigation of the reduction in area and twist angle effects on the strain distribution, damage and process load of vortex extrusion die [Volume 11, Issue 42, 2021, Pages 95-106]
D
-
Damage
Investigation of the reduction in area and twist angle effects on the strain distribution, damage and process load of vortex extrusion die [Volume 11, Issue 42, 2021, Pages 95-106]
-
DAZ
Effect of bonding time and temperature on microstructure of GTD-111/ BNi-3 /GTD-111 system
during the Transient Liquid Phase (TLP) [Volume 11, Issue 39, 2021, Pages 91-108]
-
Dehydration
Fabrication and characterization of developed polysulfone hollow fiber membranes for dehydration of gas streams via gas-liquid membrane contactor [Volume 11, Issue 40, 2021, Pages 45-58]
-
Deree of Diution
Investigating the effect of degree of dilution and interlayer on the abrasion resistance of the hard-wired coated layer of Fe-Cr-C based on SMAW method on plane carbon steel [Volume 11, Issue 40, 2021, Pages 133-32]
E
-
Electrochemistry
Synthesis of nickel-cobalt-aluminum/graphene nanocomposite and its
electrochemical performance as supercapacitor [Volume 11, Issue 42, 2021, Pages 63-80]
-
Electrode E347
Effects of the Replacement Vanadium to Niobium at E347-16 Electrode on Micro-structure and Corrosion Behaviors of Weld Metal [Volume 11, Issue 39, 2021, Pages 31-42]
-
Electrodeposition current density
A comparative study on the effect of electrodeposition current density on the grain size of Ni and Ni-W nanocrystalline coatings [Volume 11, Issue 40, 2021, Pages 33-44]
-
Electroforming
Fabrication of Cu-Al2O3 composite tubes through electroforming process and investigation on the effect of alumina particles on corrosion resistance of the tubes [Volume 11, Issue 41, 2021, Pages 63-78]
-
Electromagnetic waves absorption
Synthesis of FeCo alloyed nanoparticles with different weight ratios via microemulsion route and studying the magnetic properties [Volume 11, Issue 42, 2021, Pages 45-62]
-
Electroplating
Preparation and evaluation of mechanical behavior of nanostructure Ni-P/Al2O3-SiC composite coating [Volume 11, Issue 39, 2021, Pages 109-120]
-
Exhaust Manifold
Root Cause Analysis of Water-Cooled Exhaust Manifold in High Speed Marine Diesel Engine [Volume 11, Issue 42, 2021, Pages 1-16]
-
Exothermic reaction
The application of combustion synthesis reactions in Ni-Ti system in the joining of steel to tungsten carbide [Volume 11, Issue 41, 2021, Pages 103-114]
F
-
Fe-Co thin film
The Effect of Co Concentration on the Magnetic Properties of Obliquely Sputtered Fe–Co Thin Films [Volume 11, Issue 41, 2021, Pages 91-102]
-
Fe-Co thin film
The Effect of Oblique Deposition on the Magnetic Behavior of Fe-Co Alloy Thin Films Fabricated by Sputtering Technique [Volume 11, Issue 42, 2021, Pages 31-44]
-
Ferrite-martensite dual-phase microstructure
Investigation of abnormal tensile behavior of DIN 16MnCr5 low carbon low alloy steel under ferrite-martensite dual-phase microstructures in comparison with full martensitic condition [Volume 11, Issue 41, 2021, Pages 17-34]
-
Ferromagnetic resonance frequency
The Effect of Co Concentration on the Magnetic Properties of Obliquely Sputtered Fe–Co Thin Films [Volume 11, Issue 41, 2021, Pages 91-102]
-
Ferromagnetic resonance frequency
The Effect of Oblique Deposition on the Magnetic Behavior of Fe-Co Alloy Thin Films Fabricated by Sputtering Technique [Volume 11, Issue 42, 2021, Pages 31-44]
-
Film Boiling
Root Cause Analysis of Water-Cooled Exhaust Manifold in High Speed Marine Diesel Engine [Volume 11, Issue 42, 2021, Pages 1-16]
-
Finned Tube
Investigation of High Frequency Resistance Welding (HFRW) Variables on microstructure and mechanical properties of dissimilar joints between chromium-molybdenum low alloy steel tubes to chromium high alloy steels [Volume 11, Issue 39, 2021, Pages 1-15]
-
Formaldehyde Gas
Effect of Various Heat Treatment Conditions on Nickel Ferrite Nanoparticles and Investigating its Sensitivity to Formaldehyde [Volume 11, Issue 42, 2021, Pages 17-30]
-
Full martensitic microstructure
Investigation of abnormal tensile behavior of DIN 16MnCr5 low carbon low alloy steel under ferrite-martensite dual-phase microstructures in comparison with full martensitic condition [Volume 11, Issue 41, 2021, Pages 17-34]
G
-
Gas-liquid membrane contactor
Fabrication and characterization of developed polysulfone hollow fiber membranes for dehydration of gas streams via gas-liquid membrane contactor [Volume 11, Issue 40, 2021, Pages 45-58]
-
Gelatin
Synthesis of porous hydroxyapatite nano particles via sol-gel route by using different organic polymers [Volume 11, Issue 41, 2021, Pages 49-62]
-
Grain size
A comparative study on the effect of electrodeposition current density on the grain size of Ni and Ni-W nanocrystalline coatings [Volume 11, Issue 40, 2021, Pages 33-44]
-
Graphene
Synthesis of nickel-cobalt-aluminum/graphene nanocomposite and its
electrochemical performance as supercapacitor [Volume 11, Issue 42, 2021, Pages 63-80]
H
-
Heat Treatment
Effect of Various Heat Treatment Conditions on Nickel Ferrite Nanoparticles and Investigating its Sensitivity to Formaldehyde [Volume 11, Issue 42, 2021, Pages 17-30]
-
High-Frequency
Investigation of High Frequency Resistance Welding (HFRW) Variables on microstructure and mechanical properties of dissimilar joints between chromium-molybdenum low alloy steel tubes to chromium high alloy steels [Volume 11, Issue 39, 2021, Pages 1-15]
-
Hot rolling
Study on microstructure and mechanical properties of API X70 steel at various hot rolling conditions [Volume 11, Issue 41, 2021, Pages 79-90]
-
Hybrid nanocomposite
Preparation and evaluation of mechanical behavior of nanostructure Ni-P/Al2O3-SiC composite coating [Volume 11, Issue 39, 2021, Pages 109-120]
-
Hydrothermal
Synthesis of nickel-cobalt-aluminum/graphene nanocomposite and its
electrochemical performance as supercapacitor [Volume 11, Issue 42, 2021, Pages 63-80]
-
Hydroxyapatite
Synthesis of porous hydroxyapatite nano particles via sol-gel route by using different organic polymers [Volume 11, Issue 41, 2021, Pages 49-62]
I
-
IN738LC superalloy
Tracing the creep lifetime degradation of IN738LC superalloy based on the primary carbide decomposition reaction and composition changes in the carbide regions [Volume 11, Issue 42, 2021, Pages 81-94]
-
Infrared brazing
Investigation of effective parameters on dissimilar infrared brazing for Ti-6Al-4Vv and SS316 L by Ag Base filler metal [Volume 11, Issue 41, 2021, Pages 1-16]
-
Interaction
The effect of temperature on microstructure during ultra-rapid annealing of severely deformed low-carbon steel [Volume 11, Issue 40, 2021, Pages 1-12]
-
Inter-critical annealing
Investigation of abnormal tensile behavior of DIN 16MnCr5 low carbon low alloy steel under ferrite-martensite dual-phase microstructures in comparison with full martensitic condition [Volume 11, Issue 41, 2021, Pages 17-34]
-
Interface layer
Investigating the effect of degree of dilution and interlayer on the abrasion resistance of the hard-wired coated layer of Fe-Cr-C based on SMAW method on plane carbon steel [Volume 11, Issue 40, 2021, Pages 133-32]
-
Intermediate phase
Aluminothermic Reduction of Khatoon Abad Molybdenum Trioxide in Microwave: Investigation on the Effect of Aluminum Particle Size and Scale-up on the Reduction Process [Volume 11, Issue 40, 2021, Pages 91-106]
L
-
Leaching
A review on the extraction of lithium from its minerals - Case study: Lithium extraction from spodumene concentrate using sulfation roasting under ball milling conditions [Volume 11, Issue 40, 2021, Pages 75-90]
-
Lithium minerals
A review on the extraction of lithium from its minerals - Case study: Lithium extraction from spodumene concentrate using sulfation roasting under ball milling conditions [Volume 11, Issue 40, 2021, Pages 75-90]
-
Long-term service
Tracing the creep lifetime degradation of IN738LC superalloy based on the primary carbide decomposition reaction and composition changes in the carbide regions [Volume 11, Issue 42, 2021, Pages 81-94]
M
-
Magnesium
Deposition, Characterization and Investigation of Photo-Electrical Properties of Nanostructured Thin Film Mg Doped ZnO by Sol-Gel Method [Volume 11, Issue 40, 2021, Pages 107-124]
-
Magnetic anisotropy
The Effect of Co Concentration on the Magnetic Properties of Obliquely Sputtered Fe–Co Thin Films [Volume 11, Issue 41, 2021, Pages 91-102]
-
Magnetic nanoparticles
Synthesis of FeCo alloyed nanoparticles with different weight ratios via microemulsion route and studying the magnetic properties [Volume 11, Issue 42, 2021, Pages 45-62]
-
Marine Diesel Engine
Root Cause Analysis of Water-Cooled Exhaust Manifold in High Speed Marine Diesel Engine [Volume 11, Issue 42, 2021, Pages 1-16]
-
Mean effective strain
Investigation of the reduction in area and twist angle effects on the strain distribution, damage and process load of vortex extrusion die [Volume 11, Issue 42, 2021, Pages 95-106]
-
Mesoporous
Synthesis and Characterization of Activated Carbon from Rice husk [Volume 11, Issue 40, 2021, Pages 125-136]
-
Microemulsion
Synthesis of FeCo alloyed nanoparticles with different weight ratios via microemulsion route and studying the magnetic properties [Volume 11, Issue 42, 2021, Pages 45-62]
-
Microstructural characteristics
Tracing the creep lifetime degradation of IN738LC superalloy based on the primary carbide decomposition reaction and composition changes in the carbide regions [Volume 11, Issue 42, 2021, Pages 81-94]
-
Microstructure
Investigation of High Frequency Resistance Welding (HFRW) Variables on microstructure and mechanical properties of dissimilar joints between chromium-molybdenum low alloy steel tubes to chromium high alloy steels [Volume 11, Issue 39, 2021, Pages 1-15]
-
Microstructure
Effects of the Replacement Vanadium to Niobium at E347-16 Electrode on Micro-structure and Corrosion Behaviors of Weld Metal [Volume 11, Issue 39, 2021, Pages 31-42]
-
Microstructure
Investigation of effective parameters on dissimilar infrared brazing for Ti-6Al-4Vv and SS316 L by Ag Base filler metal [Volume 11, Issue 41, 2021, Pages 1-16]
-
Microstructure
Study on microstructure and mechanical properties of API X70 steel at various hot rolling conditions [Volume 11, Issue 41, 2021, Pages 79-90]
-
Microwave
Aluminothermic Reduction of Khatoon Abad Molybdenum Trioxide in Microwave: Investigation on the Effect of Aluminum Particle Size and Scale-up on the Reduction Process [Volume 11, Issue 40, 2021, Pages 91-106]
-
Molybdenum oxide
Aluminothermic Reduction of Khatoon Abad Molybdenum Trioxide in Microwave: Investigation on the Effect of Aluminum Particle Size and Scale-up on the Reduction Process [Volume 11, Issue 40, 2021, Pages 91-106]
N
-
Nanocomposite
Optimization of physical and mechanical properties of calcium silicate nanocomposite by Taguchi method [Volume 11, Issue 39, 2021, Pages 77-90]
-
Nanocomposite
Synthesis of nickel-cobalt-aluminum/graphene nanocomposite and its
electrochemical performance as supercapacitor [Volume 11, Issue 42, 2021, Pages 63-80]
-
Nanocrystalline coating
A comparative study on the effect of electrodeposition current density on the grain size of Ni and Ni-W nanocrystalline coatings [Volume 11, Issue 40, 2021, Pages 33-44]
-
Nano Fast Cement
Optimization of physical and mechanical properties of calcium silicate nanocomposite by Taguchi method [Volume 11, Issue 39, 2021, Pages 77-90]
-
Nano Hydroxyapatite
Optimization of physical and mechanical properties of calcium silicate nanocomposite by Taguchi method [Volume 11, Issue 39, 2021, Pages 77-90]
-
NiFe2O4 Nano Particles
Effect of Various Heat Treatment Conditions on Nickel Ferrite Nanoparticles and Investigating its Sensitivity to Formaldehyde [Volume 11, Issue 42, 2021, Pages 17-30]
-
Niobium
Effects of the Replacement Vanadium to Niobium at E347-16 Electrode on Micro-structure and Corrosion Behaviors of Weld Metal [Volume 11, Issue 39, 2021, Pages 31-42]
-
Ni-P/Al2O3-SiC coating
Preparation and evaluation of mechanical behavior of nanostructure Ni-P/Al2O3-SiC composite coating [Volume 11, Issue 39, 2021, Pages 109-120]
-
NiTi intermetallic compound
The application of combustion synthesis reactions in Ni-Ti system in the joining of steel to tungsten carbide [Volume 11, Issue 41, 2021, Pages 103-114]
-
Ni-W alloy coating
A comparative study on the effect of electrodeposition current density on the grain size of Ni and Ni-W nanocrystalline coatings [Volume 11, Issue 40, 2021, Pages 33-44]
-
Non-solvent additive
Fabrication and characterization of developed polysulfone hollow fiber membranes for dehydration of gas streams via gas-liquid membrane contactor [Volume 11, Issue 40, 2021, Pages 45-58]
O
-
Oblique deposition Magnetic anisotropy
The Effect of Oblique Deposition on the Magnetic Behavior of Fe-Co Alloy Thin Films Fabricated by Sputtering Technique [Volume 11, Issue 42, 2021, Pages 31-44]
-
Oblique sputtering technique
The Effect of Co Concentration on the Magnetic Properties of Obliquely Sputtered Fe–Co Thin Films [Volume 11, Issue 41, 2021, Pages 91-102]
P
-
Photo-Electrical Properties
Deposition, Characterization and Investigation of Photo-Electrical Properties of Nanostructured Thin Film Mg Doped ZnO by Sol-Gel Method [Volume 11, Issue 40, 2021, Pages 107-124]
-
Porous nano particles
Synthesis of porous hydroxyapatite nano particles via sol-gel route by using different organic polymers [Volume 11, Issue 41, 2021, Pages 49-62]
-
PSF hollow fiber membrane
Fabrication and characterization of developed polysulfone hollow fiber membranes for dehydration of gas streams via gas-liquid membrane contactor [Volume 11, Issue 40, 2021, Pages 45-58]
R
-
Recrystallization
The effect of temperature on microstructure during ultra-rapid annealing of severely deformed low-carbon steel [Volume 11, Issue 40, 2021, Pages 1-12]
-
Resistance Welding
Investigation of High Frequency Resistance Welding (HFRW) Variables on microstructure and mechanical properties of dissimilar joints between chromium-molybdenum low alloy steel tubes to chromium high alloy steels [Volume 11, Issue 39, 2021, Pages 1-15]
-
Rice Husk
Synthesis and Characterization of Activated Carbon from Rice husk [Volume 11, Issue 40, 2021, Pages 125-136]
-
Root Cause Analysis
Root Cause Analysis of Water-Cooled Exhaust Manifold in High Speed Marine Diesel Engine [Volume 11, Issue 42, 2021, Pages 1-16]
S
-
Sample’s mass
Aluminothermic Reduction of Khatoon Abad Molybdenum Trioxide in Microwave: Investigation on the Effect of Aluminum Particle Size and Scale-up on the Reduction Process [Volume 11, Issue 40, 2021, Pages 91-106]
-
Sensitivity
Effect of Various Heat Treatment Conditions on Nickel Ferrite Nanoparticles and Investigating its Sensitivity to Formaldehyde [Volume 11, Issue 42, 2021, Pages 17-30]
-
Severe plastic deformation
Effect of severe plastic deformation process on mechanical properties of 1.7225 Steel [Volume 11, Issue 41, 2021, Pages 35-48]
-
Silica
Synthesis and Characterization of Activated Carbon from Rice husk [Volume 11, Issue 40, 2021, Pages 125-136]
-
SMAW Welding
Investigating the effect of degree of dilution and interlayer on the abrasion resistance of the hard-wired coated layer of Fe-Cr-C based on SMAW method on plane carbon steel [Volume 11, Issue 40, 2021, Pages 133-32]
-
Sodium sulfate
A review on the extraction of lithium from its minerals - Case study: Lithium extraction from spodumene concentrate using sulfation roasting under ball milling conditions [Volume 11, Issue 40, 2021, Pages 75-90]
-
Sol-Gel
Deposition, Characterization and Investigation of Photo-Electrical Properties of Nanostructured Thin Film Mg Doped ZnO by Sol-Gel Method [Volume 11, Issue 40, 2021, Pages 107-124]
-
Sol-Gel
Synthesis of porous hydroxyapatite nano particles via sol-gel route by using different organic polymers [Volume 11, Issue 41, 2021, Pages 49-62]
-
Spodumene concentrate
A review on the extraction of lithium from its minerals - Case study: Lithium extraction from spodumene concentrate using sulfation roasting under ball milling conditions [Volume 11, Issue 40, 2021, Pages 75-90]
-
Sputtering technique
The Effect of Oblique Deposition on the Magnetic Behavior of Fe-Co Alloy Thin Films Fabricated by Sputtering Technique [Volume 11, Issue 42, 2021, Pages 31-44]
-
Steel-tungsten carbide joints
The application of combustion synthesis reactions in Ni-Ti system in the joining of steel to tungsten carbide [Volume 11, Issue 41, 2021, Pages 103-114]
-
Supercapacitor
Synthesis of nickel-cobalt-aluminum/graphene nanocomposite and its
electrochemical performance as supercapacitor [Volume 11, Issue 42, 2021, Pages 63-80]
T
-
Temperature gradient
Effect of Various Heat Treatment Conditions on Nickel Ferrite Nanoparticles and Investigating its Sensitivity to Formaldehyde [Volume 11, Issue 42, 2021, Pages 17-30]
-
Tensile properties
Investigation of abnormal tensile behavior of DIN 16MnCr5 low carbon low alloy steel under ferrite-martensite dual-phase microstructures in comparison with full martensitic condition [Volume 11, Issue 41, 2021, Pages 17-34]
-
Thermal stability
The Effect of Co Concentration on the Magnetic Properties of Obliquely Sputtered Fe–Co Thin Films [Volume 11, Issue 41, 2021, Pages 91-102]
-
Thermomechanical controlled processing (TMCP)
Study on microstructure and mechanical properties of API X70 steel at various hot rolling conditions [Volume 11, Issue 41, 2021, Pages 79-90]
-
Thin Film Layer
Deposition, Characterization and Investigation of Photo-Electrical Properties of Nanostructured Thin Film Mg Doped ZnO by Sol-Gel Method [Volume 11, Issue 40, 2021, Pages 107-124]
-
Ti-6Al-4V titanium alloy
Investigation of effective parameters on dissimilar infrared brazing for Ti-6Al-4Vv and SS316 L by Ag Base filler metal [Volume 11, Issue 41, 2021, Pages 1-16]
-
Transformation
The effect of temperature on microstructure during ultra-rapid annealing of severely deformed low-carbon steel [Volume 11, Issue 40, 2021, Pages 1-12]
-
TRIP effect
Superior improvement of tensile properties in a low alloy medium silicon DIN 1.5025 steel under single step quenching and partitioning heat treatment compared to fully martensitic conditions [Volume 11, Issue 40, 2021, Pages 59-74]
-
Twist angle
Investigation of the reduction in area and twist angle effects on the strain distribution, damage and process load of vortex extrusion die [Volume 11, Issue 42, 2021, Pages 95-106]
U
-
Ultra-Rapid Annealing
The effect of temperature on microstructure during ultra-rapid annealing of severely deformed low-carbon steel [Volume 11, Issue 40, 2021, Pages 1-12]
V
-
Vanadium
Effects of the Replacement Vanadium to Niobium at E347-16 Electrode on Micro-structure and Corrosion Behaviors of Weld Metal [Volume 11, Issue 39, 2021, Pages 31-42]
-
Vortex extrusion
Investigation of the reduction in area and twist angle effects on the strain distribution, damage and process load of vortex extrusion die [Volume 11, Issue 42, 2021, Pages 95-106]
W
-
Wear
Preparation and evaluation of mechanical behavior of nanostructure Ni-P/Al2O3-SiC composite coating [Volume 11, Issue 39, 2021, Pages 109-120]
-
Wear
Investigating the effect of degree of dilution and interlayer on the abrasion resistance of the hard-wired coated layer of Fe-Cr-C based on SMAW method on plane carbon steel [Volume 11, Issue 40, 2021, Pages 133-32]
Z
-
Zinc Oxide
Deposition, Characterization and Investigation of Photo-Electrical Properties of Nanostructured Thin Film Mg Doped ZnO by Sol-Gel Method [Volume 11, Issue 40, 2021, Pages 107-124]
Your query does not match with any item