Enhancement of Local Corrosion Resistance of CP-Titanium in H2SO4 Solution via Plasma Electrolytic Oxidation

Document Type : Research Paper

Authors

Abstract

TiO2 coating was produced in single step and during a short time (10 min) by plasma Electrolytic Oxidation (PEO). In this study corrosion behavior of the CP-Ti and PEO coated sample were evaluated. Phase composition and surface morphology of the coating were studied by XRD and SEM respectively. X-ray diffraction result shows that the coating is consist of Anatase and the rutile is not formed under coating formation circumstances. Additionally, coatings demonstrate porous structure which contains micro-pores which are formed as a result of sparking process. Open circuit Potential and Cyclic potentio dynamic polarization tests were carried out in a de-aerated solution of 40 g l-1 H2SO4 and 40 g l-1NaCl. It is shown that thermodynamic stability of Titanium was enhanced which means that corrosion tendency was decreased. Furthermore corrosion rate was decreased more than eight times. The most important achievement of this study is improvement of the resistance against pitting corrosion.

Keywords


1- D. S. R. Krishna, Y. L. Brama, and Y. Sun," Thick Rutile Layer on Titaniumm for Treibological Applications, Tribiology International," Vol. 40, pp. 329-334.2006.
2-         I. Gurrappa, "Characterization of Titanium alloy Ti-6Al-4V for Chemical, Marine and Industrial Applications", Materials Characterization, vol. 51, pp. 131-139, 2003.
3- س. غ. رضوی، م. سبکتکین ریزی و م. طاهری، " بررسی خواص مکانیکی و فیزیکی جوشکاری لیزر و قوس الکتریکی تیتانیم خالص تجاری" مواد نوین، سال 4 شماره 4، ص 71-80، تابستان 1393.
4-         V. N. Moiseev, "Titanium in Russia", Metal Science and Heat Treatment, vol. 47, pp. 371-376, 2005.
5-         H. J. Rack and J. I. Qazi, "Titanium Alloys for Biomedical Applications", Materials Science and Engineering: C, vol. 26, pp. 1269-1277, 2006.
6-         W. Zhang, Z. Zhu, and C. Y. Cheng, "A literature Review of Titanium Metallurgical Processes," Hydrometallurgy, vol. 108, pp. 177-188, 2011.
7-         C.-J. Li and G.-R. Xu, "Influence of Ammonia on the Morphologies and Enhanced Photocatalytic Activity of TiO2 Micro/Nanospheres," Applied Surface Science, vol. 257, pp. 4951-4955, 2011.
8-         H. Niazi, F. Golestani-Fard, W. Wang, M. Shahmiri, H. R. Zargar, A. Alfantazi, and R. Bayati, "Structure–Property Correlation in EEMAO Fabricated TiO2–Al2O3 Nanocomposite Coatings", ACSApplied Materials & Interfaces, vol. 6, pp. 5538-5547,  2014.
9-         M. Shokouhfar, C. Dehghanian, and A. Baradaran, "Preparation of Ceramic Coating on Ti Substrate by Plasma Electrolytic Oxidation in Different Electrolytes and Evaluation of its Corrosion Resistance", Applied Surface Science, vol. 257, pp. 2617-2624, 2011.
10-       M. Shokouhfar, C. Dehghanian, M. Montazeri, and A. Baradaran, "Preparation of Ceramic Coating on Ti Substrate by Plasma Electrolytic Oxidation in Different Electrolytes and Evaluation of its Corrosion Resistance: Part II", Applied Surface Science, vol. 258, pp. 2416-2423, 2012.
11-       N. K. Kuromoto, R. A. Simão, and G. A. Soares, "Titanium Oxide Films Produced on Commercially Pure Titanium by Anodic Oxidation with Different Voltages", Materials Characterization, vol. 58, pp. 114-121, 2007.
12-       E. Matykina, R. Arrabal, F. Monfort, P. Skeldon, and G. E. Thompson, "Incorporation of zirconia into Coatings Formed by DC Plasma Electrolytic Oxidation of Aluminium in Nanoparticle Suspensions", Applied Surface Science, vol. 255, pp. 2830-2839, 2008.
13-       A. L. Yerokhin, X. Nie, A. Leyland, A. Matthews, and S. J. Dowey, "Plasma Electrolysis for Surface Engineering", Surface and Coatings Technology, vol. 122, pp. 73-93, 1999.
14-       A. L. Yerokhin, X. Nie, A. Leyland, and A. Matthews, "Characterisation of oxide films Produced by Plasma Electrolytic Oxidation of a Ti–6Al–4V Alloy", Surface and Coatings Technology, vol. 130, pp. 195-206, 2000.
15-       H.-J. Song, M.-K. Kim, G.-C. Jung, M.-S. Vang, and Y.-J. Park, "The Effects of Spark Anodizing Treatment of Pure Titanium Metals and Titanium Alloys on Corrosion Characteristics", Surface and Coatings Technology, vol. 201, pp. 8738-8745, 2007.
16-       M. R. Bayati, F. Golestani-Fard, and A. Z. Moshfegh, "How photocatalytic activity of the MAO-Grown TiO2 Nano/Micro-Porous Films is Influenced by Growth Parameters? ", Applied Surface Science, vol. 256, pp. 4253-4259, 2010.
17-       M. R. Bayati, A. Z. Moshfegh, and F. Golestani-Fard, "Effect of Electrical Parameters on Morphology, Chemical Composition, and Photoactivity of the Nano-Porous Titania Layers Synthesized by Pulse-Microarc Oxidation", Electrochimica Acta, vol. 55, pp. 2760-2766, 2010.
18-       V. Shoaei-Rad, M. R. Bayati, F. Golestani-Fard, H. R. Zargar, and J. Javadpour, "Fabrication of ZrO2–Al2O3 Hybrid Nano-Porous Layers Through Micro arc oxidation Process", Materials Letters, vol. 65, pp. 1835-1838, 2011.
19-       V. Shoaei-Rad, M. R. Bayati, H. R. Zargar, J. Javadpour, and F. Golestani-Fard, "In situ growth of ZrO2–Al2O3 Nano-Crystalline Ceramic Coatings Via Micro Arc Oxidation of Aluminum Substrates", Materials Research Bulletin, vol. 47, pp. 1494-1499, 2012.
20-       S. Yu, "Corrosion Resistance of Titanium Alloys", in Corrosion: Fundamentals, Testing, and Protection vol. vol 13A, ed: ASM International, 2003, pp. 703–711.
21-       Z. Yao, Y. Jiang, Z. Jiang, F. Wang, and Z. Wu, "Preparation and Structure of Ceramic Coatings Containing Zirconium Oxide on Ti Alloy by Plasma Electrolytic Oxidation", Journalof Materials Processing Technology, vol. 205, pp. 303-307, 2008.
22-       Z. Yao, Z. Jiang, X. Wu, X. Sun, and Z. Wu, "Effects of Ceramic Coating by Micro-Plasma Oxidation on the Corrosion Resistance of Ti–6Al–4V alloy", Surface and Coatings Technology, vol. 200, pp. 2445-2450, 2005.
23- N. Vaughan, NACE corrosion engineer's reference book, 3rd ed., p. 111, Houston, Texas, 2002.