Synthesis of Zirconium Diboride Via Carbothermal, Borothermal, and Borocarbothermal Activation Methods

Document Type : Research Paper

Authors

• A Tahviliyan
• H Sharifi
• S Otroj
• H Nasiri

Abstract

In thepresent research Zirconium diboride powder was synthesized by carbothermal activation (ZrO₂+B₂O₃+C), borothermal activation (ZrO₂+B₄C), and a compound carbothermal- borothermal, i.e. borocarbothermal, activation (ZrO₂+B₄C+C) of different compositions at 1550°C for 3 h under argon atmosphere. XRD and SEM studies showed that the ZrB₂ powder synthesized by carbothermal activation method has grown with a rod-like morphology. In addition, carbon impurity was observed in the ZrB₂ powder. However, in the final product carbon appeared as an element which was omitted by heating at 500°C in an oxidation oven. The powder particles synthesized by this method are larger compared to those produced by other methods. Moreover, there is a lower possibility of sintering of the particles in this method. Synthesis by borothermal method, on the other hand, resulted in appearance of borate as impurity and the rod-like growth of ZrB₂. The borate impurity was reduced by washing with ethanol. Synthesis by borocarbothermal route shows a lower amount of particles penetration compared to the borothermal method, which is due to the presence of carbon in the sample. Also, in borocarbothermal synthesis carbon was reduced from the system similar to the carbothermal method. A comparison between the abovementioned routes revealed that activation of borate carbide is a more appropriate method for synthesizing zirconium diboride powder compared to the other techniques.

Keywords

• Zirconium Diboride
• synthesis
• Carbothermal
• Borothermal
• Borocarbothermal

---

References

1- Y. Zhang, Li. Ruixing, J. Yanshan, Zh. Bin, D. Huiping, Li. Junping and F. Zhihai,"Morphology Evolution of ZrB₂nano Particles Synthesized by Sol–Gel Method", Journal of Solid State Chemistry, vol. 184, pp. 2047-2052, 2011.

2- W. G. Fahrenholtz,G. E. Hilmas, I. G. Talmy and J. A. Zaykoski, "Refractory diborides of Zirconium and Hafnium", Journal of the American Ceramic Society, vol. 90, pp. 1347–1364, 2007.

3- G. Sun, H. Wang, W. Wang, Y. Wang and Z. FU, "Synthesis of Ultra-Fine ZrB₂ Powder by Borothermal Reaction Under High Heating Rate", Advanced Materials Research, vol. 66, pp. 77-80, 2009.

4- B. Akgün, "Formation of Zirconium diboride and other metal borides by Volume Combustion Synthesis and Mechanochemical Process", M. S. Thesis, Middle East Technical University, Ankara, 2008.

5- C. Monticelli,F. Zucchi, A. Pagnoni and M. D. Colle, "Corrosion of a Zirconium Diboride/Silicon Carbide Composite in Aqueous Solutions". Electrochimica Acta, vol. 50, pp. 3461–3469, 2005.

6- J. K. Sonber, T. S. R. Ch. Murthy, C. Subramanian, S. Kumar, R. K. Fotedar and A.K. Suri, "Investigations on synthesis of ZrB₂ and Development of New Composites with HfB₂ and TiSi₂", International Journal of Refractory Metals and Hard Materials, vol. 29, pp. 21–30, 2011.

7- A. Makino and C. K. Law, "SHS Combustion Characteristics of Several Ceramics and Intermetallic Compounds”, Journal of the American Ceramic Society", vol. 77, pp. 778-786, 1994.

8- E. Bilgi, "Production of Titanium Diboride", M. S. Tthesis, Middle East Technical University, Ankara, 2007.

9- Y.L. Xie, Xie, H. Thomas, S. Sanders and F. Robert, "Solution-Based Synthesis of Submicrometer ZrB2 and ZrB2–TaB2", Journal of the American Ceramic Society, vol. 91, pp. 1469-1474. 2008.

10- سیم‌چی، ع، "آشنایی با نانوذرات (خواص، روش تولید و کاربردها)"، دانشگاه صنعتی شریف، چاپ اول، 1387، ص 232-221.

11- T. Tsuchida and S. Yamamoto, "Mechanical Activation Assisted Self-Propagating High Temperature Synthesis of ZrC and ZrB2 in Air from Zr/B/C Powder Mixtures", Journal of the European Ceramic Society, vol. 24, pp. 45-51, 2004.

12- W. M. Guo and G. J. Zhang, "Reaction Processes and Characterization of ZrB₂ Powder Prepared by Boro/Carbothermal Reduction of ZrO₂in Vacuum", Journal of the American Ceramic Society, vol. 92, pp. 264–267, 2009.

13- W. Xin-Gang, G. Wei-Ming and Z. Guo-Jun, "Pressure Less sintering Mechanism and Microstructure of ZrB₂–SiC Ceramics Doped with Boron", Scripta Materialia, vol. 61, pp. 177–180, 2009.

14- صالحی،م. مهمان نواز،ح.، کرباسیان، غ. رحمانی،م.، "بررسی اثر شار حرارتی بر ریزساختار و عملکرد پوشش‌های سد حرارتی مرتبه ای"، نشریه مواد نوین، دوره 5، شماره 20، ص130-117، تابستان 1394.

15- A. I. Karasev, " Preparation of Technical Zirconium Diboride by the Carbothermic Reduction of Mixtures of Zirconium and Boron Oxides", Soviet Powder Metallurgy and Metal Ceramics, vol. 12, pp. 926-929, 1973.

16- L. Barton, D. Nicholls, "The Hydrogenation of Boron Monoxide to Diborane and the Reactions of Boron and Boron Carbide with Titanium and Zirconium Dioxides", Journal Inorganic Nuclear Chemistry, vol. 28, pp. 1367–1372, 1966.

17- L. Donnan, "The hydrogenation of Boron Monoxide to Diborane and the Reactions of Boron and Boron Carbide with Titanium and Zirconium Dioxides", Journal of Inorganic and Nuclear Chemistry, vol. 28, pp. 1367–1372, 1966.

18- L. Haijie, L. Ruixing, Zh. Yun, J. Yanshan, Zh. Bin, L. Chengqiang L. Junping and F. Zhihai, Reduction "Low Temperature Synthesis of ZrB powder Synergistically by Borothermal and Carbothermal Reduction", Rare Metals, vol. 30, pp. 541-558, 2011.

19- W. Hailong, Sh. Zhang, D. Chen, Q. Han, H. Lu, H. Xu, W. Chang and R. Zhang, "Carbothermal Reduction Synthesis of Zirconium Diboride Powders Assisted by Microwave", Advanced Materials Research, vol. 105-106, pp. , 203-206, 2010.

20- J. Eun-Younh, K. Jung-Hun, J. Se-Hyuk and C. Sung-Churl,"Synthesis of ZrB₂ Powders by Carbothermal and Borothermal Reduction", Journal of Alloys and Compounds,vol. 538, pp. 164–168, 2012.

21- Q. Hui-Yu, G. Wei-Ming and Z Ji,"ZrB₂ Powders Prepared by Boro/Carbothermal Reduction of ZrO₂: The Effects of Carbon Source and Reaction Atmosphere", Powder Technology, vol. 217, No. 3, pp. 462–466, 2012.

22- A. Monshi, M.R. Foroughi and M.R. Monshi," Modified Scherrer Equation to Estimate Eoreeccuratelynano-Crystallite Size Using XRD", World Journal of Nano Science and Engineering, vol. 2, No.3, pp. 154-160, 2012.

23- Y. Liu, A. Erdemir and E. I. Meletis, "Influence of Environmental Parameters on the Frictional Behavior of DLC Coatings", Surface and Coatings Technology, vol. 94-95, pp. 463-468, 1997.