A New Method to Investigate Localized Corrosion on 2024, 7075 and 6061 Aluminium Alloys in the Sea-Like Atmosphere Environments

Document Type : Research Paper

Authors

Abstract

Adding some alloying elements such as copper and zinc into aluminium and appling precipitation hardening process, makes these alloys sensitive to different types of corrosion in marine atmospheric environments. Precipitates on the matrix and grain boundaries are the main factor for corrosion. In order to study the corrosion behavior of metals in marine atmospheric environments, simulated environmental conditions is required to provide severe atmospheric environments containing chloride ion. In this research, a new method is used to study the atmospheric corrosion. At first specially prepared samples were tasted in corrosion cells with different time periods that the salt crystals were placed on the surface of samples and end grain areas on sample thickness were investigated. In this situation 100% relative humidity condition was stable. The microscopic studies showed that the intergranular corrosion happened less than 72 hours in 7075 alloy because of presence of deposits in grain boundaries and after this time, intergranular corrosion transform to pitting and exfoliation corrosion. Uniform corrosion with small pits was stable for 2024 alloy and the corrosion rate for 6061 alloy was lower than 2024 and 7075 alloys. Finally In order to compare the corrosion behavior of surface, the alloys were placed into the salt spray test for 672 hours according to ASTM B117. In this situation, 2024 alloy had the highest rate of corrosion.

Keywords


1- C. Vargel, Corrosion of Aluminium, 2th ed.,
Elsevier, Lyon, 2004.
2- M. A. Golozar, "Electrochemical
Investigation of Localized Corrosion Behavior
of Heat Treated AA7075 in Aqueous Solution
Containing Chloride Ions", 12th National,
Iranian Corrosion Congress, Iran, 2011.
3- D. De La Fuente, E. Otero-Huerta and M.
Morcillo ," Studies of Long-Term Weathering
of Aluminium in the Atmosphere", Corrosion
Science, Vol. 49, pp. 3134-3148, 2007.
4- V. S. Sinyavskii and V. D. Kalinin, "Marine
Corrosion and Protection of Aluminum Alloys
According to Their Composition and
Structure", Protection of Metals, Vol. 41, pp.
317–328, 2005.
5- B. Kuźnicka, "Influence of Constitutional
Liquation on Corrosion Behaviour of
Aluminium Alloy 2017A" , Material
Characerization, Vol. 60, pp. 1008-1013,
2009.
6- T. Li, X.G. Li, C.F. Dong, and Y.F. Cheng
"Characterization of Atmospheric Corrosion of
2A12 Aluminum Alloy in Tropical Marine
Environment " Journal of Materials
Engineering and Performance, Vol. 19, pp.
591-598, 2010.
7- S.P. Knight, M. Salagaras and A.R.
Trueman , "The Study of Intergranular
Corrosion in Aircraft Aluminium Alloys
Using", Corrosion Science, Vol. 53, pp. 727-
734, 2011.
8- S.P. Knight, M. Salagaras, A.M. Wythe, F.
De Carlo, A.J. Davenport and A.R. Trueman ,
"In Situ X-Ray Tomography of Intergranular
Corrosion of 2024 and 7050 Aluminium
Alloys", Corrosion Science, Vol. 52, pp. 3855-
3860, 2010
9- G.K. Berukshtis and G.B. Klark," Corrosion
of Metals and Alloys", Jerusalen, pp. 281-297,
1966.
10- W. Zhen-Yao, Li Qiao-Xia, Wang Chuan,
Han Wei and Yu Guo-Cai , "Corrosion
Behaviour of Al Alloy LC4 in Geermu Salt
Lake Atmosphere", The Chinese Journal of
Nonferrous Metals, Vol. 17, pp. 24-29, 2007.
11- R., Ambat, A.J., Davenport, G.M.,
Scamans, and A., Afseth, "Effect of IronContaining Intermetallic Particles on the
Corrosion Behaviour of Aluminium",
Corrosion Science, Vol. 48, No. 11, pp.3455-
3471, 2006.
12 -م. سعیدی خانی، م. جاویـدی، ع. یزدانـی، س، وفـاخواه، "
آندایزینگ آلیاژ آلومینیوم T3-2024 در الکترولیـت ترکیبـی
اسید سولفوریک، بوریک و فـسفریک و تعیـین ضـخامت لایـه
اکـسیدی و بررسـی رفتـار خـوردگی بـه روش امپـدانس
الکتروشیمیایی" مجله مواد نوین، شماره چهارم، جلـد دوم، ص.
 .1391 تابستان، 31-44
13- N. Birbilis and R.C. Buchheit,
"Electrochemical Characteristics of
Intermetallic Phases in Aluminum Alloys",
Journal of the Electrochemical Society, B,
152(4), pp.140-151, 2005.
14- RG. Buchheit, "A compilation of
Corrosion Potentials Reported for Intermetallic
Phases in Aluminium Alloys", Journal of
Electrochemical Society, Vol. 142, pp. 3994-
3996, 1995.