Author Index

A

  • Abdollahi, Mehdi Investigating the behavior of compressive strength and abrasion resistance of the floor tile at different sintering temperatures [Volume 10, Issue 37, 2019, Pages 63-74]
  • Abdollah-pour, Hassan Investigation of microstructure and wear resistance of AZ31B/SiO2/graphite hybrid surface composite produced by friction stir processing (FSP) [Volume 10, Issue 37, 2019, Pages 47-62]
  • Ahmadimoghadam, Hajar Investigating the effect of particle size on microstructure, mechanical properties and electrical conductivity of sodium beta-alumina ceramics [Volume 10, Issue 36, 2019, Pages 107-116]
  • Ahmadimoghadam, Hajar Investigating the behavior of compressive strength and abrasion resistance of the floor tile at different sintering temperatures [Volume 10, Issue 37, 2019, Pages 63-74]
  • Ali Askari Zamani, Mohammad Synthesis of strontium titanate from celestite concentrate [Volume 10, Issue 37, 2019, Pages 105-118]
  • Amini, Roghayeh Neutron Absorption Properties of Geopolymeric Composite used Taftan Mountain Volcanic Ash [Volume 10, Issue 37, 2019, Pages 19-32]
  • Azarmi, mohammad hoseyn Experimental and finite element analysis of hot backward extrusion process of vanadium microalloyed steel preform for determining optimum preheat temperature [Volume 10, Issue 36, 2019, Pages 157-172]

B

  • Babaee, Saeed Study of optical properties, thermal behavior and thermal stability of coated PETN particles with Lithol rubine nano-pigment via ultrasonic technique using Taguchi experimental design method [Volume 10, Issue 35, 2019, Pages 63-76]
  • Baghshahi, Saeid Investigating the Rheological Behavior of Silicon Carbide Gel Casting Suspensions and its Effect on the Silicon Carbide Bodies [Volume 10, Issue 35, 2019, Pages 77-88]
  • Bahrevar, Mohammad Ali Investigating the effects of 2.5 mol% Ce doping on electrostriction behavior of lead-free (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 ceramics [Volume 10, Issue 35, 2019, Pages 101-114]
  • Berenji Tehrahi, Nikoo Indentation creep behavior of AZ61-0.7Si-xCa magnesium alloys [Volume 10, Issue 35, 2019, Pages 1-14]

D

  • Dadashpoor, HAmed Experimental study of forming Parts with central blister by Incremental forming process with positive-negative forming pattern [Volume 10, Issue 38, 2020, Pages 49-66]
  • Davoodi, Ali Root causes analyzed of leakage on the tank bottom using simulation cathodic protection [Volume 10, Issue 36, 2019, Pages 117-132]
  • Dehghanian, Changiz Deposition of spinel cobalt nickel on nickel foam by a constant current electrochemical method and its supercapacitor application [Volume 10, Issue 35, 2019, Pages 39-48]

E

  • Ehrambaf, Leila Synthesis of strontium titanate from celestite concentrate [Volume 10, Issue 37, 2019, Pages 105-118]

F

  • Fallah-Arani, Hesam Investigating the Rheological Behavior of Silicon Carbide Gel Casting Suspensions and its Effect on the Silicon Carbide Bodies [Volume 10, Issue 35, 2019, Pages 77-88]

G

  • Geranmayeh, Abdolreza Indentation creep behavior of AZ61-0.7Si-xCa magnesium alloys [Volume 10, Issue 35, 2019, Pages 1-14]
  • Ghorbani, Reza Corrosion assessment of Amine regenerator column of SPGC using process simulation in gas sweetening unit to mitigate corrosion rate by controlling process parameters [Volume 10, Issue 37, 2019, Pages 91-104]
  • Ghorbanian, Babak Application of the response surface method to optimize the chemical composition and hardness of the aluminum oxide coating created by the electrolytic plasma method [Volume 10, Issue 36, 2019, Pages 69-82]

H

  • Habibnia, Mostafa Experimental study of forming Parts with central blister by Incremental forming process with positive-negative forming pattern [Volume 10, Issue 38, 2020, Pages 49-66]
  • Hasanzadeh, Sadegh Ali Effect of Mechanical Milling Time on the Synthesis of Hydroxyapatite Nanoparticles by Mechanochemical Method [Volume 10, Issue 35, 2019, Pages 89-100]
  • Hashemi, Babak Neutron Absorption Properties of Geopolymeric Composite used Taftan Mountain Volcanic Ash [Volume 10, Issue 37, 2019, Pages 19-32]
  • Hassanzadeh-Tabrizi, S.A. Synthesis of g-C3N4/Au nanocomposite as a photocatalyst for hydrogen generation [Volume 10, Issue 38, 2020, Pages 67-78]
  • Hatami-manesh, Masoud Investigation of the Efficiency, Kinetics and Isothermic Behavior of Hexavalent Chromium Adsorption from Aqueous Solutions by Using Bioactive Adsorbents (Oak, Pomegranate and Egg Shell) [Volume 10, Issue 37, 2019, Pages 75-90]
  • Heidary Moghadam, Ali Investigation of the effect of current intensity and frequency in PC-GTAW on microstructural evolutions of weld joints of Hastelloy B-2 superalloy [Volume 10, Issue 37, 2019, Pages 1-18]
  • Houshmand, Mohammad Root causes analyzed of leakage on the tank bottom using simulation cathodic protection [Volume 10, Issue 36, 2019, Pages 117-132]

I

  • Isafi, Salah Investigating the Rheological Behavior of Silicon Carbide Gel Casting Suspensions and its Effect on the Silicon Carbide Bodies [Volume 10, Issue 35, 2019, Pages 77-88]
  • Isfahani, Taghi Effect of Mechanical Milling Time on the Synthesis of Hydroxyapatite Nanoparticles by Mechanochemical Method [Volume 10, Issue 35, 2019, Pages 89-100]

J

  • Jamasb, Shahriar Synthesizing, characterizing and investigating the crystal structural, electric and magnetic properties of superconducting compound Y2Ba5Cu7Ox [Volume 10, Issue 37, 2019, Pages 163-176]
  • Janghorban, Kamal The effect of carbon nano tubes on the compressive strength and flexural of epoxy honeycomb sandwich panels [Volume 10, Issue 35, 2019, Pages 49-62]

K

  • Karimi Zarchi, Hamid Reza Investigation of abnormal effect of dual-phase ferritic-bainitic microstructures on modification of mechanical properties of MO40 low alloy steel in comparison with full bainitic conditions [Volume 10, Issue 37, 2019, Pages 133-148]
  • Kashefi Torbati, Mehrdad Root causes analyzed of leakage on the tank bottom using simulation cathodic protection [Volume 10, Issue 36, 2019, Pages 117-132]
  • Khodabakhshi, Amir Hossein An Investigation of different parameters on the penetration depth and welding width of Ti-6Al-4V alloy by plasma arc welding [Volume 10, Issue 38, 2020, Pages 33-48]
  • Khorram, Sirous Experimental investigation of the efficiency of deposited TiO2 on porous aluminum in pollutant removal: a comparison between PEO and anodizing methods [Volume 10, Issue 38, 2020, Pages 95-108]
  • Koupaei, Narjes Synthesis and characterization of tissue engineering network scaffold composed of polycaprolactone diol / polyethyleneglycol / hydroxyapatite [Volume 10, Issue 37, 2019, Pages 33-46]
  • Krimi, Seyed Yaghoub Removal Propargite pesticide from aqueous solution using Penta Aza Tetra Ethylene on Polyacrylamide (PAA-N5) as a novel adsorbent [Volume 10, Issue 38, 2020, Pages 109-124]

L

  • Lotfi, Behnam synthesis and characterization of Al-Al3Ti in-situ composite produced by fsp using reactive mechanically alloyed powder [Volume 10, Issue 38, 2020, Pages 1-16]

M

  • Mahmudi, Reza Indentation creep behavior of AZ61-0.7Si-xCa magnesium alloys [Volume 10, Issue 35, 2019, Pages 1-14]
  • Makrtichians, SevaG Assessment of plastic deformation of the A356 foam sandwich panel during compression and bending tests [Volume 10, Issue 35, 2019, Pages 129-144]
  • Mazaheri, Mojtaba Synthesizing, characterizing and investigating the crystal structural, electric and magnetic properties of superconducting compound Y2Ba5Cu7Ox [Volume 10, Issue 37, 2019, Pages 163-176]
  • Mirbbagheri, seyyed Mohammad Hossein Assessment of plastic deformation of the A356 foam sandwich panel during compression and bending tests [Volume 10, Issue 35, 2019, Pages 129-144]
  • Mirzaee, Majid Deposition of spinel cobalt nickel on nickel foam by a constant current electrochemical method and its supercapacitor application [Volume 10, Issue 35, 2019, Pages 39-48]
  • Mohammadkhani, Farzane Experimental investigation of the efficiency of deposited TiO2 on porous aluminum in pollutant removal: a comparison between PEO and anodizing methods [Volume 10, Issue 38, 2020, Pages 95-108]
  • Moshrefifar, Masoud Effect of nano Si3N4، Al2O3 و AlMg and cold rolling process on the microstructural and mechanical properties of AL-6061alloy [Volume 10, Issue 35, 2019, Pages 115-128]
  • Mousavi Khoie, Mohammad Application of the response surface method to optimize the chemical composition and hardness of the aluminum oxide coating created by the electrolytic plasma method [Volume 10, Issue 36, 2019, Pages 69-82]
  • Mousavizade Noghabi, Seyyed Mostafa Investigation of microstructure and wear resistance of AZ31B/SiO2/graphite hybrid surface composite produced by friction stir processing (FSP) [Volume 10, Issue 37, 2019, Pages 47-62]

N

  • Nemati, Ali synthesis and investigation of solid electrolyte ion conducting lithium aluminium titanium phosphate [Volume 10, Issue 36, 2019, Pages 1-16]
  • Nikmardan, Somayeh Fabrication of AZ91D/SiC Magnesium Matrix Composite with High Particle Reinforcement Loading, Produced by Mechanical Milling of Chips and Semi-Solid Powder Processing [Volume 10, Issue 36, 2019, Pages 17-32]
  • Noorbakhsh, Armaghan Hydroxyapatite - Hyaluronic acid scaffold production using solvent extraction method [Volume 10, Issue 36, 2019, Pages 133-140]

O

  • Omidi, Mahdi Synthesis of g-C3N4/Au nanocomposite as a photocatalyst for hydrogen generation [Volume 10, Issue 38, 2020, Pages 67-78]

P

  • Paydar, Mohammad Hossein Investigating the effect of particle size on microstructure, mechanical properties and electrical conductivity of sodium beta-alumina ceramics [Volume 10, Issue 36, 2019, Pages 107-116]
  • Pourmortazavi, Seied Mahdi Study of optical properties, thermal behavior and thermal stability of coated PETN particles with Lithol rubine nano-pigment via ultrasonic technique using Taguchi experimental design method [Volume 10, Issue 35, 2019, Pages 63-76]
  • Pouyafar, Vahid Fabrication of AZ91D/SiC Magnesium Matrix Composite with High Particle Reinforcement Loading, Produced by Mechanical Milling of Chips and Semi-Solid Powder Processing [Volume 10, Issue 36, 2019, Pages 17-32]

R

  • Rafiei, Mahdi The effect of Si addition on microstructure and tribological properties of Fe-Al claddings produced by GTAW process [Volume 10, Issue 37, 2019, Pages 149-162]
  • Ramazani, Haidar Production of machinable ferritic-ausferritic ADI by selection of proper partially austenitizing time [Volume 10, Issue 36, 2019, Pages 93-106]
  • Rashidi, Ali Mohammad Production of machinable ferritic-ausferritic ADI by selection of proper partially austenitizing time [Volume 10, Issue 36, 2019, Pages 93-106]
  • Rezaeian-delouei, Mehdi Investigation of microstructure and wear resistance of AZ31B/SiO2/graphite hybrid surface composite produced by friction stir processing (FSP) [Volume 10, Issue 37, 2019, Pages 47-62]
  • Rostami, Abbas The effect of Si addition on microstructure and tribological properties of Fe-Al claddings produced by GTAW process [Volume 10, Issue 37, 2019, Pages 149-162]

S

  • Saberi Lamraski, Masoomeh Study of optical properties, thermal behavior and thermal stability of coated PETN particles with Lithol rubine nano-pigment via ultrasonic technique using Taguchi experimental design method [Volume 10, Issue 35, 2019, Pages 63-76]
  • Sadeghian, Zohreh synthesis and characterization of Al-Al3Ti in-situ composite produced by fsp using reactive mechanically alloyed powder [Volume 10, Issue 38, 2020, Pages 1-16]
  • Setoudeh, Nader Synthesis of strontium titanate from celestite concentrate [Volume 10, Issue 37, 2019, Pages 105-118]
  • Shahnazari, Zahra Synthesis and characterization of tissue engineering network scaffold composed of polycaprolactone diol / polyethyleneglycol / hydroxyapatite [Volume 10, Issue 37, 2019, Pages 33-46]

T

  • Tabrizian, Parinaz Investigating the Rheological Behavior of Silicon Carbide Gel Casting Suspensions and its Effect on the Silicon Carbide Bodies [Volume 10, Issue 35, 2019, Pages 77-88]
  • Tajally, Mohammad Application of the response surface method to optimize the chemical composition and hardness of the aluminum oxide coating created by the electrolytic plasma method [Volume 10, Issue 36, 2019, Pages 69-82]
  • Tajally, Mohammad Investigation of microstructure and wear resistance of AZ31B/SiO2/graphite hybrid surface composite produced by friction stir processing (FSP) [Volume 10, Issue 37, 2019, Pages 47-62]
  • Tavakkoli, Haman Synthesis, Characterization and investigation of removal process of methylene blue dye by perovskite-type oxides nanoparticles La0.9Sr0.1FeO3 [Volume 10, Issue 35, 2019, Pages 145-168]
  • Tavakoli, Hossein Application of the response surface method to optimize the chemical composition and hardness of the aluminum oxide coating created by the electrolytic plasma method [Volume 10, Issue 36, 2019, Pages 69-82]
  • Tohidi, Maryam Novel Synthesis of Pure and Zinc-doped Tin Dioxide by using Urea-based Solvent [Volume 10, Issue 36, 2019, Pages 83-92]

V

  • Vahidshad, Yaser An Investigation of different parameters on the penetration depth and welding width of Ti-6Al-4V alloy by plasma arc welding [Volume 10, Issue 38, 2020, Pages 33-48]

Y

  • Yazdizade Khalili, Abbas Investigation of abnormal effect of dual-phase ferritic-bainitic microstructures on modification of mechanical properties of MO40 low alloy steel in comparison with full bainitic conditions [Volume 10, Issue 37, 2019, Pages 133-148]

Z

  • Zahmatkeshani, Fatemeh Novel Synthesis of Pure and Zinc-doped Tin Dioxide by using Urea-based Solvent [Volume 10, Issue 36, 2019, Pages 83-92]
  • Zare, Mehran Effect of nano Si3N4، Al2O3 و AlMg and cold rolling process on the microstructural and mechanical properties of AL-6061alloy [Volume 10, Issue 35, 2019, Pages 115-128]
  • Zare, Mohammad Ali Removal Propargite pesticide from aqueous solution using Penta Aza Tetra Ethylene on Polyacrylamide (PAA-N5) as a novel adsorbent [Volume 10, Issue 38, 2020, Pages 109-124]
  • Zebarjad, Seyed Mojtaba The effect of carbon nano tubes on the compressive strength and flexural of epoxy honeycomb sandwich panels [Volume 10, Issue 35, 2019, Pages 49-62]