Keyword Index

A

  • Abnormal mechanical properties Investigation of abnormal effect of dual-phase ferritic-bainitic microstructures on modification of mechanical properties of MO40 low alloy steel in comparison with full bainitic conditions [Volume 10, Issue 37, 2019, Pages 133-148]
  • Abrasion resistance Investigating the behavior of compressive strength and abrasion resistance of the floor tile at different sintering temperatures [Volume 10, Issue 37, 2019, Pages 63-74]
  • ADI Production of machinable ferritic-ausferritic ADI by selection of proper partially austenitizing time [Volume 10, Issue 36, 2019, Pages 93-106]
  • Adsorption Synthesis, Characterization and investigation of removal process of methylene blue dye by perovskite-type oxides nanoparticles La0.9Sr0.1FeO3 [Volume 10, Issue 35, 2019, Pages 145-168]
  • Adsorption Removal Propargite pesticide from aqueous solution using Penta Aza Tetra Ethylene on Polyacrylamide (PAA-N5) as a novel adsorbent [Volume 10, Issue 38, 2019, Pages 109-124]
  • Adsorption Isotherm Investigation of the Efficiency, Kinetics and Isothermic Behavior of Hexavalent Chromium Adsorption from Aqueous Solutions by Using Bioactive Adsorbents (Oak, Pomegranate and Egg Shell) [Volume 10, Issue 37, 2019, Pages 75-90]
  • Advanced XPS characteristics Deposition of spinel cobalt nickel on nickel foam by a constant current electrochemical method and its supercapacitor application [Volume 10, Issue 35, 2019, Pages 39-48]
  • Alkaline Leaching Investigation on Effect of Crystallization Step in Antimony Recovery Using Hydrometallurgical Method in Alkaline Sulphide Solutions [Volume 10, Issue 38, 2019, Pages 79-94]
  • Anatase Synthesis of strontium titanate from celestite concentrate [Volume 10, Issue 37, 2019, Pages 105-118]
  • Antimony Recovery Investigation on Effect of Crystallization Step in Antimony Recovery Using Hydrometallurgical Method in Alkaline Sulphide Solutions [Volume 10, Issue 38, 2019, Pages 79-94]
  • Aqueous Solution Investigation of the Efficiency, Kinetics and Isothermic Behavior of Hexavalent Chromium Adsorption from Aqueous Solutions by Using Bioactive Adsorbents (Oak, Pomegranate and Egg Shell) [Volume 10, Issue 37, 2019, Pages 75-90]
  • AZ61‒0.7Si alloy Indentation creep behavior of AZ61-0.7Si-xCa magnesium alloys [Volume 10, Issue 35, 2019, Pages 1-14]
  • AZ91D/SiC metal matrix composite Fabrication of AZ91D/SiC Magnesium Matrix Composite with High Particle Reinforcement Loading, Produced by Mechanical Milling of Chips and Semi-Solid Powder Processing [Volume 10, Issue 36, 2019, Pages 17-32]

B

  • Bone tissue engineering Synthesis and characterization of tissue engineering network scaffold composed of polycaprolactone diol / polyethyleneglycol / hydroxyapatite [Volume 10, Issue 37, 2019, Pages 33-46]
  • Boron Carbide Neutron Absorption Properties of Geopolymeric Composite used Taftan Mountain Volcanic Ash [Volume 10, Issue 37, 2019, Pages 19-32]
  • Boron Oxide Neutron Absorption Properties of Geopolymeric Composite used Taftan Mountain Volcanic Ash [Volume 10, Issue 37, 2019, Pages 19-32]

C

  • Calcination Novel Synthesis of Pure and Zinc-doped Tin Dioxide by using Urea-based Solvent [Volume 10, Issue 36, 2019, Pages 83-92]
  • Carbon Nanotubes The effect of carbon nano tubes on the compressive strength and flexural of epoxy honeycomb sandwich panels [Volume 10, Issue 35, 2019, Pages 49-62]
  • Casting A356 aluminum foam Assessment of plastic deformation of the A356 foam sandwich panel during compression and bending tests [Volume 10, Issue 35, 2019, Pages 129-144]
  • Celestite Synthesis of strontium titanate from celestite concentrate [Volume 10, Issue 37, 2019, Pages 105-118]
  • CeO2 Investigating the effects of 2.5 mol% Ce doping on electrostriction behavior of lead-free (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 ceramics [Volume 10, Issue 35, 2019, Pages 101-114]
  • Chromium Investigation of the Efficiency, Kinetics and Isothermic Behavior of Hexavalent Chromium Adsorption from Aqueous Solutions by Using Bioactive Adsorbents (Oak, Pomegranate and Egg Shell) [Volume 10, Issue 37, 2019, Pages 75-90]
  • Cladding The effect of Si addition on microstructure and tribological properties of Fe-Al claddings produced by GTAW process [Volume 10, Issue 37, 2019, Pages 149-162]
  • CO2 Corrosion Corrosion assessment of Amine regenerator column of SPGC using process simulation in gas sweetening unit to mitigate corrosion rate by controlling process parameters [Volume 10, Issue 37, 2019, Pages 91-104]
  • Coating Study of optical properties, thermal behavior and thermal stability of coated PETN particles with Lithol rubine nano-pigment via ultrasonic technique using Taguchi experimental design method [Volume 10, Issue 35, 2019, Pages 63-76]
  • Cobaltite Nickel Deposition of spinel cobalt nickel on nickel foam by a constant current electrochemical method and its supercapacitor application [Volume 10, Issue 35, 2019, Pages 39-48]
  • Compressive strength The effect of carbon nano tubes on the compressive strength and flexural of epoxy honeycomb sandwich panels [Volume 10, Issue 35, 2019, Pages 49-62]
  • Compressive strength Investigating the behavior of compressive strength and abrasion resistance of the floor tile at different sintering temperatures [Volume 10, Issue 37, 2019, Pages 63-74]
  • Concrete Pipes Investigating the effect of using colors containing copper oxide and zinc oxide (zinc-rich) on microbial corrosion behavior of sewage pipes [Volume 10, Issue 35, 2019, Pages 15-26]
  • Copper Oxide dye Investigating the effect of using colors containing copper oxide and zinc oxide (zinc-rich) on microbial corrosion behavior of sewage pipes [Volume 10, Issue 35, 2019, Pages 15-26]
  • Corrosion Resistance The influence of two types of nano-structured Ni-P and zinc-phosphate primer on the corrosion resistance of painted low carbon steel [Volume 10, Issue 36, 2019, Pages 33-50]
  • Creep mechanism Indentation creep behavior of AZ61-0.7Si-xCa magnesium alloys [Volume 10, Issue 35, 2019, Pages 1-14]
  • Crystallization Investigation on Effect of Crystallization Step in Antimony Recovery Using Hydrometallurgical Method in Alkaline Sulphide Solutions [Volume 10, Issue 38, 2019, Pages 79-94]
  • Crystal structure Synthesizing, characterizing and investigating the crystal structural, electric and magnetic properties of superconducting compound Y2Ba5Cu7Ox [Volume 10, Issue 37, 2019, Pages 163-176]
  • Current Efficiency Investigation on Effect of Crystallization Step in Antimony Recovery Using Hydrometallurgical Method in Alkaline Sulphide Solutions [Volume 10, Issue 38, 2019, Pages 79-94]
  • Cutting forces Production of machinable ferritic-ausferritic ADI by selection of proper partially austenitizing time [Volume 10, Issue 36, 2019, Pages 93-106]

D

  • Densification Investigating the behavior of compressive strength and abrasion resistance of the floor tile at different sintering temperatures [Volume 10, Issue 37, 2019, Pages 63-74]
  • Dual matrix structure Production of machinable ferritic-ausferritic ADI by selection of proper partially austenitizing time [Volume 10, Issue 36, 2019, Pages 93-106]
  • Dual phase ferritic-bainitic microstructures Investigation of abnormal effect of dual-phase ferritic-bainitic microstructures on modification of mechanical properties of MO40 low alloy steel in comparison with full bainitic conditions [Volume 10, Issue 37, 2019, Pages 133-148]

E

  • Electrolytic plasma oxidation Application of the response surface method to optimize the chemical composition and hardness of the aluminum oxide coating created by the electrolytic plasma method [Volume 10, Issue 36, 2019, Pages 69-82]
  • Electrowining Investigation on Effect of Crystallization Step in Antimony Recovery Using Hydrometallurgical Method in Alkaline Sulphide Solutions [Volume 10, Issue 38, 2019, Pages 79-94]
  • Epoxy Sandwich Panels The effect of carbon nano tubes on the compressive strength and flexural of epoxy honeycomb sandwich panels [Volume 10, Issue 35, 2019, Pages 49-62]
  • Extrusion Application of the combination of extrusion and equal channel angular pressing for processing fine grained and nanostructured metallic materials [Volume 10, Issue 38, 2019, Pages 17-32]

F

  • Fe3Al The effect of Si addition on microstructure and tribological properties of Fe-Al claddings produced by GTAW process [Volume 10, Issue 37, 2019, Pages 149-162]
  • Finite element method Root causes analyzed of leakage on the tank bottom using simulation cathodic protection [Volume 10, Issue 36, 2019, Pages 117-132]
  • Finite element method Experimental and finite element analysis of hot backward extrusion process of vanadium microalloyed steel preform for determining optimum preheat temperature [Volume 10, Issue 36, 2019, Pages 157-172]
  • Flexural Strength Investigating the Rheological Behavior of Silicon Carbide Gel Casting Suspensions and its Effect on the Silicon Carbide Bodies [Volume 10, Issue 35, 2019, Pages 77-88]
  • Flexural Strength The effect of carbon nano tubes on the compressive strength and flexural of epoxy honeycomb sandwich panels [Volume 10, Issue 35, 2019, Pages 49-62]
  • Floor tile Investigating the behavior of compressive strength and abrasion resistance of the floor tile at different sintering temperatures [Volume 10, Issue 37, 2019, Pages 63-74]
  • Friction stir processing (FSP) Investigation of microstructure and wear resistance of AZ31B/SiO2/graphite hybrid surface composite produced by friction stir processing (FSP) [Volume 10, Issue 37, 2019, Pages 47-62]
  • Friction stir spot welding.Microstructure protrusion friction stir spot welding: the microstructure and mechanical properties of Al 6061 alloy [Volume 10, Issue 36, 2019, Pages 51-68]
  • Friction Stir Welding Influence of Friction Stir Welding Parameters on Mechanical and Metallurgical Properties in Lap Joints of 5456Aluminum Alloy [Volume 10, Issue 36, 2019, Pages 141-156]

G

  • Gas sweetening Corrosion assessment of Amine regenerator column of SPGC using process simulation in gas sweetening unit to mitigate corrosion rate by controlling process parameters [Volume 10, Issue 37, 2019, Pages 91-104]
  • Gel-casting Investigating the Rheological Behavior of Silicon Carbide Gel Casting Suspensions and its Effect on the Silicon Carbide Bodies [Volume 10, Issue 35, 2019, Pages 77-88]
  • Geopolymer Neutron Absorption Properties of Geopolymeric Composite used Taftan Mountain Volcanic Ash [Volume 10, Issue 37, 2019, Pages 19-32]
  • Gold Synthesis of g-C3N4/Au nanocomposite as a photocatalyst for hydrogen generation [Volume 10, Issue 38, 2019, Pages 67-78]
  • Graphite Investigation of microstructure and wear resistance of AZ31B/SiO2/graphite hybrid surface composite produced by friction stir processing (FSP) [Volume 10, Issue 37, 2019, Pages 47-62]
  • Graphitic carbon nitride Synthesis of g-C3N4/Au nanocomposite as a photocatalyst for hydrogen generation [Volume 10, Issue 38, 2019, Pages 67-78]
  • GTAW The effect of Si addition on microstructure and tribological properties of Fe-Al claddings produced by GTAW process [Volume 10, Issue 37, 2019, Pages 149-162]

H

  • Hastelloy B-2 Investigation of the effect of current intensity and frequency in PC-GTAW on microstructural evolutions of weld joints of Hastelloy B-2 superalloy [Volume 10, Issue 37, 2019, Pages 1-18]
  • Heat-treatment Synthesis of g-C3N4/Au nanocomposite as a photocatalyst for hydrogen generation [Volume 10, Issue 38, 2019, Pages 67-78]
  • Heavy Metals Investigation of the Efficiency, Kinetics and Isothermic Behavior of Hexavalent Chromium Adsorption from Aqueous Solutions by Using Bioactive Adsorbents (Oak, Pomegranate and Egg Shell) [Volume 10, Issue 37, 2019, Pages 75-90]
  • High particle reinforcement loading Fabrication of AZ91D/SiC Magnesium Matrix Composite with High Particle Reinforcement Loading, Produced by Mechanical Milling of Chips and Semi-Solid Powder Processing [Volume 10, Issue 36, 2019, Pages 17-32]
  • Honeycomb The effect of carbon nano tubes on the compressive strength and flexural of epoxy honeycomb sandwich panels [Volume 10, Issue 35, 2019, Pages 49-62]
  • Hyaluronic acid Hydroxyapatite - Hyaluronic acid scaffold production using solvent extraction method [Volume 10, Issue 36, 2019, Pages 133-140]
  • Hybrid surface nanocomposite Investigation of microstructure and wear resistance of AZ31B/SiO2/graphite hybrid surface composite produced by friction stir processing (FSP) [Volume 10, Issue 37, 2019, Pages 47-62]
  • Hydrogen generation Synthesis of g-C3N4/Au nanocomposite as a photocatalyst for hydrogen generation [Volume 10, Issue 38, 2019, Pages 67-78]
  • Hydroxyapatite Effect of Mechanical Milling Time on the Synthesis of Hydroxyapatite Nanoparticles by Mechanochemical Method [Volume 10, Issue 35, 2019, Pages 89-100]
  • Hydroxyapatite Hydroxyapatite - Hyaluronic acid scaffold production using solvent extraction method [Volume 10, Issue 36, 2019, Pages 133-140]
  • Hydroxyapatite Synthesis and characterization of tissue engineering network scaffold composed of polycaprolactone diol / polyethyleneglycol / hydroxyapatite [Volume 10, Issue 37, 2019, Pages 33-46]

I

  • Indentation creep Indentation creep behavior of AZ61-0.7Si-xCa magnesium alloys [Volume 10, Issue 35, 2019, Pages 1-14]
  • Insitu synthesis Effect of Mechanical Milling Time on the Synthesis of Hydroxyapatite Nanoparticles by Mechanochemical Method [Volume 10, Issue 35, 2019, Pages 89-100]
  • Interaction between bainite crystals and ferrite phase Investigation of abnormal effect of dual-phase ferritic-bainitic microstructures on modification of mechanical properties of MO40 low alloy steel in comparison with full bainitic conditions [Volume 10, Issue 37, 2019, Pages 133-148]
  • Isotherms models Removal Propargite pesticide from aqueous solution using Penta Aza Tetra Ethylene on Polyacrylamide (PAA-N5) as a novel adsorbent [Volume 10, Issue 38, 2019, Pages 109-124]

K

  • Kinetic Models Investigation of the Efficiency, Kinetics and Isothermic Behavior of Hexavalent Chromium Adsorption from Aqueous Solutions by Using Bioactive Adsorbents (Oak, Pomegranate and Egg Shell) [Volume 10, Issue 37, 2019, Pages 75-90]
  • Kinetics models Removal Propargite pesticide from aqueous solution using Penta Aza Tetra Ethylene on Polyacrylamide (PAA-N5) as a novel adsorbent [Volume 10, Issue 38, 2019, Pages 109-124]

L

  • Lap Joint Influence of Friction Stir Welding Parameters on Mechanical and Metallurgical Properties in Lap Joints of 5456Aluminum Alloy [Volume 10, Issue 36, 2019, Pages 141-156]
  • Lead free BCZT Investigating the effects of 2.5 mol% Ce doping on electrostriction behavior of lead-free (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 ceramics [Volume 10, Issue 35, 2019, Pages 101-114]

M

  • Machinability Production of machinable ferritic-ausferritic ADI by selection of proper partially austenitizing time [Volume 10, Issue 36, 2019, Pages 93-106]
  • Martensitic An Investigation of different parameters on the penetration depth and welding width of Ti-6Al-4V alloy by plasma arc welding [Volume 10, Issue 38, 2019, Pages 33-48]
  • Mechanochemical synthesis Effect of Mechanical Milling Time on the Synthesis of Hydroxyapatite Nanoparticles by Mechanochemical Method [Volume 10, Issue 35, 2019, Pages 89-100]
  • Methylene Blue Synthesis, Characterization and investigation of removal process of methylene blue dye by perovskite-type oxides nanoparticles La0.9Sr0.1FeO3 [Volume 10, Issue 35, 2019, Pages 145-168]
  • Mg2Si morphology Indentation creep behavior of AZ61-0.7Si-xCa magnesium alloys [Volume 10, Issue 35, 2019, Pages 1-14]
  • Microbial Corrosion Investigating the effect of using colors containing copper oxide and zinc oxide (zinc-rich) on microbial corrosion behavior of sewage pipes [Volume 10, Issue 35, 2019, Pages 15-26]
  • Microstructure Investigating the effect of particle size on microstructure, mechanical properties and electrical conductivity of sodium beta-alumina ceramics [Volume 10, Issue 36, 2019, Pages 107-116]
  • Microstructure Investigation of the effect of current intensity and frequency in PC-GTAW on microstructural evolutions of weld joints of Hastelloy B-2 superalloy [Volume 10, Issue 37, 2019, Pages 1-18]
  • Microstructure An Investigation of different parameters on the penetration depth and welding width of Ti-6Al-4V alloy by plasma arc welding [Volume 10, Issue 38, 2019, Pages 33-48]
  • Milling Synthesis of strontium titanate from celestite concentrate [Volume 10, Issue 37, 2019, Pages 105-118]
  • Milling time Effect of Mechanical Milling Time on the Synthesis of Hydroxyapatite Nanoparticles by Mechanochemical Method [Volume 10, Issue 35, 2019, Pages 89-100]
  • Milling time Investigating the effect of particle size on microstructure, mechanical properties and electrical conductivity of sodium beta-alumina ceramics [Volume 10, Issue 36, 2019, Pages 107-116]
  • MO40 low alloy steels Investigation of abnormal effect of dual-phase ferritic-bainitic microstructures on modification of mechanical properties of MO40 low alloy steel in comparison with full bainitic conditions [Volume 10, Issue 37, 2019, Pages 133-148]

N

  • Nanoparticles Effect of Mechanical Milling Time on the Synthesis of Hydroxyapatite Nanoparticles by Mechanochemical Method [Volume 10, Issue 35, 2019, Pages 89-100]
  • Nanoparticles Effect of nano Si3N4، Al2O3 و AlMg and cold rolling process on the microstructural and mechanical properties of AL-6061alloy [Volume 10, Issue 35, 2019, Pages 115-128]
  • Nanopowder Synthesis, Characterization and investigation of removal process of methylene blue dye by perovskite-type oxides nanoparticles La0.9Sr0.1FeO3 [Volume 10, Issue 35, 2019, Pages 145-168]
  • NASICON synthesis and investigation of solid electrolyte ion conducting lithium aluminium titanium phosphate [Volume 10, Issue 36, 2019, Pages 1-16]
  • Neutron Absorber Neutron Absorption Properties of Geopolymeric Composite used Taftan Mountain Volcanic Ash [Volume 10, Issue 37, 2019, Pages 19-32]
  • Ni -P Nano - Structured The influence of two types of nano-structured Ni-P and zinc-phosphate primer on the corrosion resistance of painted low carbon steel [Volume 10, Issue 36, 2019, Pages 33-50]
  • NiTiHf alloys Effect of cold rolling process on recovery strain and recovery ratio of Ni50Ti40Hf10 shape memory alloy [Volume 10, Issue 35, 2019, Pages 27-38]

O

  • Optical Properties Study of optical properties, thermal behavior and thermal stability of coated PETN particles with Lithol rubine nano-pigment via ultrasonic technique using Taguchi experimental design method [Volume 10, Issue 35, 2019, Pages 63-76]

P

  • Partially austenitizing time Production of machinable ferritic-ausferritic ADI by selection of proper partially austenitizing time [Volume 10, Issue 36, 2019, Pages 93-106]
  • Perovskite Synthesis, Characterization and investigation of removal process of methylene blue dye by perovskite-type oxides nanoparticles La0.9Sr0.1FeO3 [Volume 10, Issue 35, 2019, Pages 145-168]
  • Perovskite Synthesis of strontium titanate from celestite concentrate [Volume 10, Issue 37, 2019, Pages 105-118]
  • PETN Study of optical properties, thermal behavior and thermal stability of coated PETN particles with Lithol rubine nano-pigment via ultrasonic technique using Taguchi experimental design method [Volume 10, Issue 35, 2019, Pages 63-76]
  • Photocatalyst Synthesis of g-C3N4/Au nanocomposite as a photocatalyst for hydrogen generation [Volume 10, Issue 38, 2019, Pages 67-78]
  • Planetary ball mill Fabrication of AZ91D/SiC Magnesium Matrix Composite with High Particle Reinforcement Loading, Produced by Mechanical Milling of Chips and Semi-Solid Powder Processing [Volume 10, Issue 36, 2019, Pages 17-32]
  • Plasma Arc Welding An Investigation of different parameters on the penetration depth and welding width of Ti-6Al-4V alloy by plasma arc welding [Volume 10, Issue 38, 2019, Pages 33-48]
  • Plasma Electrolytic Oxidation (PEO) Experimental investigation of the efficiency of deposited TiO2 on porous aluminum in pollutant removal: a comparison between PEO and anodizing methods [Volume 10, Issue 38, 2019, Pages 95-108]
  • Polycaprolactone Synthesis and characterization of tissue engineering network scaffold composed of polycaprolactone diol / polyethyleneglycol / hydroxyapatite [Volume 10, Issue 37, 2019, Pages 33-46]
  • Polyethylene glycol Synthesis and characterization of tissue engineering network scaffold composed of polycaprolactone diol / polyethyleneglycol / hydroxyapatite [Volume 10, Issue 37, 2019, Pages 33-46]
  • Porous Scaffold Synthesis and characterization of tissue engineering network scaffold composed of polycaprolactone diol / polyethyleneglycol / hydroxyapatite [Volume 10, Issue 37, 2019, Pages 33-46]
  • Propargite Removal Propargite pesticide from aqueous solution using Penta Aza Tetra Ethylene on Polyacrylamide (PAA-N5) as a novel adsorbent [Volume 10, Issue 38, 2019, Pages 109-124]
  • PVA Hydroxyapatite - Hyaluronic acid scaffold production using solvent extraction method [Volume 10, Issue 36, 2019, Pages 133-140]

R

  • Regenerator tower Corrosion assessment of Amine regenerator column of SPGC using process simulation in gas sweetening unit to mitigate corrosion rate by controlling process parameters [Volume 10, Issue 37, 2019, Pages 91-104]
  • Rheological behavior Investigating the Rheological Behavior of Silicon Carbide Gel Casting Suspensions and its Effect on the Silicon Carbide Bodies [Volume 10, Issue 35, 2019, Pages 77-88]
  • Rhodamine 6G Experimental investigation of the efficiency of deposited TiO2 on porous aluminum in pollutant removal: a comparison between PEO and anodizing methods [Volume 10, Issue 38, 2019, Pages 95-108]

S

  • Scaffold Hydroxyapatite - Hyaluronic acid scaffold production using solvent extraction method [Volume 10, Issue 36, 2019, Pages 133-140]
  • Semi-solid powder processing Fabrication of AZ91D/SiC Magnesium Matrix Composite with High Particle Reinforcement Loading, Produced by Mechanical Milling of Chips and Semi-Solid Powder Processing [Volume 10, Issue 36, 2019, Pages 17-32]
  • Serrated alpha An Investigation of different parameters on the penetration depth and welding width of Ti-6Al-4V alloy by plasma arc welding [Volume 10, Issue 38, 2019, Pages 33-48]
  • Sewage Investigating the effect of using colors containing copper oxide and zinc oxide (zinc-rich) on microbial corrosion behavior of sewage pipes [Volume 10, Issue 35, 2019, Pages 15-26]
  • Si3N4 Effect of nano Si3N4، Al2O3 و AlMg and cold rolling process on the microstructural and mechanical properties of AL-6061alloy [Volume 10, Issue 35, 2019, Pages 115-128]
  • Silica Investigation of microstructure and wear resistance of AZ31B/SiO2/graphite hybrid surface composite produced by friction stir processing (FSP) [Volume 10, Issue 37, 2019, Pages 47-62]
  • Silicon carbide Investigating the Rheological Behavior of Silicon Carbide Gel Casting Suspensions and its Effect on the Silicon Carbide Bodies [Volume 10, Issue 35, 2019, Pages 77-88]
  • Simulation Corrosion assessment of Amine regenerator column of SPGC using process simulation in gas sweetening unit to mitigate corrosion rate by controlling process parameters [Volume 10, Issue 37, 2019, Pages 91-104]
  • Sintering temperature Investigating the behavior of compressive strength and abrasion resistance of the floor tile at different sintering temperatures [Volume 10, Issue 37, 2019, Pages 63-74]
  • Sodium beta-alumina Investigating the effect of particle size on microstructure, mechanical properties and electrical conductivity of sodium beta-alumina ceramics [Volume 10, Issue 36, 2019, Pages 107-116]
  • Sol-Gel Synthesis, Characterization and investigation of removal process of methylene blue dye by perovskite-type oxides nanoparticles La0.9Sr0.1FeO3 [Volume 10, Issue 35, 2019, Pages 145-168]
  • Solvent Evaporation Hydroxyapatite - Hyaluronic acid scaffold production using solvent extraction method [Volume 10, Issue 36, 2019, Pages 133-140]
  • Spark plasma sintering Fabrication of AZ91D/SiC Magnesium Matrix Composite with High Particle Reinforcement Loading, Produced by Mechanical Milling of Chips and Semi-Solid Powder Processing [Volume 10, Issue 36, 2019, Pages 17-32]
  • SrTiO3 Synthesis of strontium titanate from celestite concentrate [Volume 10, Issue 37, 2019, Pages 105-118]
  • Step quenching heat treatment Investigation of abnormal effect of dual-phase ferritic-bainitic microstructures on modification of mechanical properties of MO40 low alloy steel in comparison with full bainitic conditions [Volume 10, Issue 37, 2019, Pages 133-148]
  • Strength Investigating the effect of particle size on microstructure, mechanical properties and electrical conductivity of sodium beta-alumina ceramics [Volume 10, Issue 36, 2019, Pages 107-116]
  • Supercapacitor Deposition of spinel cobalt nickel on nickel foam by a constant current electrochemical method and its supercapacitor application [Volume 10, Issue 35, 2019, Pages 39-48]
  • Superconductivity Synthesizing, characterizing and investigating the crystal structural, electric and magnetic properties of superconducting compound Y2Ba5Cu7Ox [Volume 10, Issue 37, 2019, Pages 163-176]

T

  • Taguchi experimental Design Study of optical properties, thermal behavior and thermal stability of coated PETN particles with Lithol rubine nano-pigment via ultrasonic technique using Taguchi experimental design method [Volume 10, Issue 35, 2019, Pages 63-76]
  • Ti-6Al-4V titanium alloy An Investigation of different parameters on the penetration depth and welding width of Ti-6Al-4V alloy by plasma arc welding [Volume 10, Issue 38, 2019, Pages 33-48]
  • Tin Dioxide Novel Synthesis of Pure and Zinc-doped Tin Dioxide by using Urea-based Solvent [Volume 10, Issue 36, 2019, Pages 83-92]

U

  • Ultrasonic method Study of optical properties, thermal behavior and thermal stability of coated PETN particles with Lithol rubine nano-pigment via ultrasonic technique using Taguchi experimental design method [Volume 10, Issue 35, 2019, Pages 63-76]
  • Urea Novel Synthesis of Pure and Zinc-doped Tin Dioxide by using Urea-based Solvent [Volume 10, Issue 36, 2019, Pages 83-92]

V

  • Volcanic Ash Neutron Absorption Properties of Geopolymeric Composite used Taftan Mountain Volcanic Ash [Volume 10, Issue 37, 2019, Pages 19-32]

Y

  • YBCO family Synthesizing, characterizing and investigating the crystal structural, electric and magnetic properties of superconducting compound Y2Ba5Cu7Ox [Volume 10, Issue 37, 2019, Pages 163-176]

Z

  • Zinc-doped Tin Dioxide Novel Synthesis of Pure and Zinc-doped Tin Dioxide by using Urea-based Solvent [Volume 10, Issue 36, 2019, Pages 83-92]
  • Zinc Oxide dye Investigating the effect of using colors containing copper oxide and zinc oxide (zinc-rich) on microbial corrosion behavior of sewage pipes [Volume 10, Issue 35, 2019, Pages 15-26]
  • Zinc Phosphate primer The influence of two types of nano-structured Ni-P and zinc-phosphate primer on the corrosion resistance of painted low carbon steel [Volume 10, Issue 36, 2019, Pages 33-50]