A
-
Abbasi, M
The Study of the Effects Intermetallic Phases Formation on the Bond Strength and Electrical Resistivity of Al/Cu Bimetal produced by Compound Static Casting [Volume 7, Issue 27, 2017, Pages 27-44]
-
Ahmadi, M
Effect of heat input on microstructure, mechanical properties and corrosion behavior of 5083-H321 aluminum alloy welded joint using P-MIG process [Volume 7, Issue 28, 2017, Pages 1-16]
-
Aliabadi, A
Dry sliding wear behavior of Astaloy85Mo steel surface melted by gas tungsten arc welding [Volume 7, Issue 28, 2017, Pages 27-38]
-
Allah Dadi, M.
Investigating the Effects of Heat Treatment in the Microstructure and Metallurgical Properties of the Explosive Welding of 304 Stainless Steel and CK45 Carbon Steel [Volume 7, Issue 26, 2017, Pages 19-34]
-
Amini, K
Characterization of mechanical and corrosion behaviour of multilayered Cu/Al/Al2O3 nano-composite produced by ARB process [Volume 7, Issue 28, 2017, Pages 149-162]
-
Amini, K.
The effect of deep cryogenic treatment on the hardness and wear behavior of Din 1.2344 tool steel [Volume 7, Issue 26, 2017, Pages 105-118]
-
Amir Shaghaghi, A.
Preparation of UPVC/ SAN/Ag-TiO2 nanocomposite by casting method and characterization of its physical and mechanical properties [Volume 7, Issue 25, 2016, Pages 87-100]
B
-
Babakhani, A.
Investigation of Mechanical Properties of Al-Al2O3 Composites Synthesized By Spark Plasma Sintering [Volume 7, Issue 26, 2017, Pages 49-58]
-
Babakhani, A.
Wear Properties of Al-Gr Composites Produced Using Liquid Homogenization Followed by Cold Press-Sintering [Volume 7, Issue 26, 2017, Pages 95-104]
-
Babakhani, Abolfazl
An investigation on the effect of adhesive bonding strength on bending behavior of sandwich panels with Al A356/SiCp composite foam core [Volume 7, Issue 27, 2017, Pages 85-94]
-
Baderloo, M.
Synthesis of MoSi2-20%TiC Nanocomposite by Method Mechanical Activated Self-Propagation Combustion Synthesis (MASHS) [Volume 7, Issue 25, 2016, Pages 71-86]
-
Baghshahi, S.
Effect of pH on Production Process and Characteristics of Zirconium Carbide Nano Particles Synthesized by Sol-Gel Method [Volume 7, Issue 25, 2016, Pages 1-12]
-
Bahrololoom, M. E.
Fabrication, Structural Characterization and Magnetic Properties of Nanostructure Fe-Co-W Coatings Prepared by Electrodeposition [Volume 7, Issue 25, 2016, Pages 31-44]
-
Bakhtiari, R
Effect of temperature and time, the interlayer on microstructure and mechanical properties of Transient Liquid Phase (TLP) bonding of AISI321 stainless steel [Volume 7, Issue 28, 2017, Pages 95-112]
-
Borji, S.
The Effect of Adding Nanodiamond Particles and Heat Treatment on Hardness and Wear Resistance of Ni-P-Nanodiamond Electroless Nanocomposite Coatings [Volume 7, Issue 26, 2017, Pages 59-74]
D
-
Danesh Manesh, H.
The finite element analysis of applying the controlling pouer on the surface transformation hardening in the vicinity of discontinuity in the workpiece depth [Volume 7, Issue 26, 2017, Pages 1-18]
E
-
Ebrahimi, G. R.
The Effect of Twinning on Texture Evolution of AZ63 Magnesium Alloy During Hot Working [Volume 7, Issue 25, 2016, Pages 45-58]
-
Ebrahimi, R
Stress and Fracture Analysis of a Fitting in Slug Catcher of Gas Refinery [Volume 7, Issue 27, 2017, Pages 95-112]
-
Ehsani, N
Investigation of SiC graded coating formation mechanism on graphite by pack cemetation process and influenece of types of raw material [Volume 7, Issue 28, 2017, Pages 39-46]
-
Eqra, R.
Investigation and comparison of electromagnetic properties of epoxy-graphene and epoxy-carbon nanotube nanocomposites [Volume 7, Issue 26, 2017, Pages 85-94]
-
Eshaghi, A.
Photocatalytic degradation of reactive red 198 by TiO2-activated carbon nanocomposite [Volume 7, Issue 26, 2017, Pages 35-48]
-
Eslami-Farsani, R.
Investigation of Filler Metal on the Mechanical and Metallurgical Properties of Welding- Brazing Hybrid Joining of Aluminium to Ggalvanized Steel [Volume 7, Issue 25, 2016, Pages 59-70]
F
-
Farahbakhsh, I
Evaluation of Milling Time and Balls Diameters during Surface Mechanical Coating (SMC) in the Presence of Copper Powder and Nickel Balls [Volume 7, Issue 27, 2017, Pages 67-84]
-
Faraji, N.
Preparation of UPVC/ SAN/Ag-TiO2 nanocomposite by casting method and characterization of its physical and mechanical properties [Volume 7, Issue 25, 2016, Pages 87-100]
-
Farbod, M
Investigation of Structure and Magnetic Properties of Ni Ferrite Powders Synthesized by Plasma Arc Discharge [Volume 7, Issue 28, 2017, Pages 17-26]
-
Farbodi, M.
Preparation of UPVC/ SAN/Ag-TiO2 nanocomposite by casting method and characterization of its physical and mechanical properties [Volume 7, Issue 25, 2016, Pages 87-100]
-
Farooghi, M
Hydration Resistance Improvement of MgO-CaO Refractories by the Addition of Nano-ZrO2 [Volume 7, Issue 28, 2017, Pages 135-148]
-
Farzadi, A
Effect of heat input on microstructure, mechanical properties and corrosion behavior of 5083-H321 aluminum alloy welded joint using P-MIG process [Volume 7, Issue 28, 2017, Pages 1-16]
-
Fattahi, H.
The Experimental and Numerical Evaluation of the Residual Stress in the Hot Forming Sheet Process for 5083 Aluminum via the Gas Blowing Process [Volume 7, Issue 25, 2016, Pages 13-22]
G
-
Ghaferi, Z.
Fabrication, Structural Characterization and Magnetic Properties of Nanostructure Fe-Co-W Coatings Prepared by Electrodeposition [Volume 7, Issue 25, 2016, Pages 31-44]
-
Ghamari, R
Structure, Microstructure, Magnetic and Electromagnetic Properties Ni-Mn-Zn Ferrite Produced by Glycine-Nitrate Process [Volume 7, Issue 27, 2017, Pages 45-56]
-
Ghambari, M
Dry sliding wear behavior of Astaloy85Mo steel surface melted by gas tungsten arc welding [Volume 7, Issue 28, 2017, Pages 27-38]
-
Gharbani, P
Study of tea compost column biofilter efficiency to remove some heavy metal ions from aqueous solutions [Volume 7, Issue 28, 2017, Pages 67-80]
-
Ghasemifard, M
Electrochemical Nucleation and Growth of Copper on Molybdenum Substrate: Effect of pH, Potential and Cleaning procedure [Volume 7, Issue 28, 2017, Pages 81-94]
-
Ghasemi-Kahrizsangi, S
Hydration Resistance Improvement of MgO-CaO Refractories by the Addition of Nano-ZrO2 [Volume 7, Issue 28, 2017, Pages 135-148]
-
Ghayour, H
Characterization of mechanical and corrosion behaviour of multilayered Cu/Al/Al2O3 nano-composite produced by ARB process [Volume 7, Issue 28, 2017, Pages 149-162]
-
Ghayour, H.
The effect of deep cryogenic treatment on the hardness and wear behavior of Din 1.2344 tool steel [Volume 7, Issue 26, 2017, Pages 105-118]
-
Gheisari, Kh
Structure, Microstructure, Magnetic and Electromagnetic Properties Ni-Mn-Zn Ferrite Produced by Glycine-Nitrate Process [Volume 7, Issue 27, 2017, Pages 45-56]
-
Gheisari, KH
Investigation of Structure and Magnetic Properties of Ni Ferrite Powders Synthesized by Plasma Arc Discharge [Volume 7, Issue 28, 2017, Pages 17-26]
-
Golestanipour, Masoud
An investigation on the effect of adhesive bonding strength on bending behavior of sandwich panels with Al A356/SiCp composite foam core [Volume 7, Issue 27, 2017, Pages 85-94]
H
-
Habibi, A.
Graphene nanosheets film by plasma electrolysis deposition [Volume 7, Issue 26, 2017, Pages 75-84]
-
Haeri pour, S.
Photocatalytic degradation of reactive red 198 by TiO2-activated carbon nanocomposite [Volume 7, Issue 26, 2017, Pages 35-48]
-
Hashemi, B
Producing WC-Co coating with electrolytic plasma processing on low carbon steel and investigation its wear resistance [Volume 7, Issue 28, 2017, Pages 57-66]
-
Hatami, O
Characterization of mechanical and corrosion behaviour of multilayered Cu/Al/Al2O3 nano-composite produced by ARB process [Volume 7, Issue 28, 2017, Pages 149-162]
-
Heidari, G
Electrochemical Nucleation and Growth of Copper on Molybdenum Substrate: Effect of pH, Potential and Cleaning procedure [Volume 7, Issue 28, 2017, Pages 81-94]
-
Heydarzadeh Sohi, M
Dry sliding wear behavior of Astaloy85Mo steel surface melted by gas tungsten arc welding [Volume 7, Issue 28, 2017, Pages 27-38]
J
-
Jalali Azizpour, M.
The Experimental and Numerical Evaluation of the Residual Stress in the Hot Forming Sheet Process for 5083 Aluminum via the Gas Blowing Process [Volume 7, Issue 25, 2016, Pages 13-22]
-
Janghorban, K
Producing WC-Co coating with electrolytic plasma processing on low carbon steel and investigation its wear resistance [Volume 7, Issue 28, 2017, Pages 57-66]
-
Janghorban, K.
Investigation and comparison of electromagnetic properties of epoxy-graphene and epoxy-carbon nanotube nanocomposites [Volume 7, Issue 26, 2017, Pages 85-94]
-
Javadpou, S
Optimization of parameters for tape casting of yttria stabilized zirconia (YSZ8) by Taguchi design for electrolyte solid oxide fuel cell [Volume 7, Issue 28, 2017, Pages 47-56]
-
Javanbakht, M
Electrochemical Nucleation and Growth of Copper on Molybdenum Substrate: Effect of pH, Potential and Cleaning procedure [Volume 7, Issue 28, 2017, Pages 81-94]
-
Javidi, M
Stress and Fracture Analysis of a Fitting in Slug Catcher of Gas Refinery [Volume 7, Issue 27, 2017, Pages 95-112]
-
Jenabali Jahromi, S. A.
The finite element analysis of applying the controlling pouer on the surface transformation hardening in the vicinity of discontinuity in the workpiece depth [Volume 7, Issue 26, 2017, Pages 1-18]
K
-
Kavyani, M.
The Effect of Twinning on Texture Evolution of AZ63 Magnesium Alloy During Hot Working [Volume 7, Issue 25, 2016, Pages 45-58]
-
Khademi, D.
Investigation of Mechanical Properties of Al-Al2O3 Composites Synthesized By Spark Plasma Sintering [Volume 7, Issue 26, 2017, Pages 49-58]
-
Khajeh, A.
The finite element analysis of applying the controlling pouer on the surface transformation hardening in the vicinity of discontinuity in the workpiece depth [Volume 7, Issue 26, 2017, Pages 1-18]
-
Khakzad, A.
Graphene nanosheets film by plasma electrolysis deposition [Volume 7, Issue 26, 2017, Pages 75-84]
-
Khalifesoltani, Sayed A
Investigation of SiC graded coating formation mechanism on graphite by pack cemetation process and influenece of types of raw material [Volume 7, Issue 28, 2017, Pages 39-46]
-
Khanzadeh, M.R.
Investigating the Effects of Heat Treatment in the Microstructure and Metallurgical Properties of the Explosive Welding of 304 Stainless Steel and CK45 Carbon Steel [Volume 7, Issue 26, 2017, Pages 19-34]
L
-
Lotfian, N
Investigation of two step sintering on microstructure and compresive strenght of nano structured forsterite scaffold using lost foam [Volume 7, Issue 28, 2017, Pages 125-134]
M
-
Mahboubi, F.
Graphene nanosheets film by plasma electrolysis deposition [Volume 7, Issue 26, 2017, Pages 75-84]
-
Mahmoodi, M
Synthesis and Characterization of Temperature‐Sensitive Hydrogel Copolymer Based on N-isopropylacrylamide for Medical Applications [Volume 7, Issue 27, 2017, Pages 15-26]
-
Mahzon, F
Producing WC-Co coating with electrolytic plasma processing on low carbon steel and investigation its wear resistance [Volume 7, Issue 28, 2017, Pages 57-66]
-
Malaei, M
Producing WC-Co coating with electrolytic plasma processing on low carbon steel and investigation its wear resistance [Volume 7, Issue 28, 2017, Pages 57-66]
-
Manafi, S
Evaluation of Milling Time and Balls Diameters during Surface Mechanical Coating (SMC) in the Presence of Copper Powder and Nickel Balls [Volume 7, Issue 27, 2017, Pages 67-84]
-
Mashayekh, P
Investigation of two step sintering on microstructure and compresive strenght of nano structured forsterite scaffold using lost foam [Volume 7, Issue 28, 2017, Pages 125-134]
-
Mirhadi, B.
Effect of pH on Production Process and Characteristics of Zirconium Carbide Nano Particles Synthesized by Sol-Gel Method [Volume 7, Issue 25, 2016, Pages 1-12]
-
Mirhadi, Seyed M
Investigation of two step sintering on microstructure and compresive strenght of nano structured forsterite scaffold using lost foam [Volume 7, Issue 28, 2017, Pages 125-134]
-
Mirjani, M.
The Effect of Adding Nanodiamond Particles and Heat Treatment on Hardness and Wear Resistance of Ni-P-Nanodiamond Electroless Nanocomposite Coatings [Volume 7, Issue 26, 2017, Pages 59-74]
-
Mirzaei, B
Design and fabrication of electrochemical biosensor based on β-CD-Graphene nanocomposite for specific adsorption of curcumin, chlorpromazine and clomipramine [Volume 7, Issue 28, 2017, Pages 113-124]
-
Misaghi, M.A
Effect of temperature and time, the interlayer on microstructure and mechanical properties of Transient Liquid Phase (TLP) bonding of AISI321 stainless steel [Volume 7, Issue 28, 2017, Pages 95-112]
-
Moeni far, S
Investigation on Effect of Aluminum on the Corrosion Resistance of Hadfield Austenitic Manganese Steel [Volume 7, Issue 27, 2017, Pages 1-14]
-
Moghim, M. H.
Investigation of the Effect of Strain Rate on Tensile Properties of Polyurethane Using Eyring Model [Volume 7, Issue 25, 2016, Pages 23-30]
-
Mohammadi, B.
Investigation and comparison of electromagnetic properties of epoxy-graphene and epoxy-carbon nanotube nanocomposites [Volume 7, Issue 26, 2017, Pages 85-94]
-
Mohammadpour, E
Study of tea compost column biofilter efficiency to remove some heavy metal ions from aqueous solutions [Volume 7, Issue 28, 2017, Pages 67-80]
-
Mokarian Khozani, B.
The effect of deep cryogenic treatment on the hardness and wear behavior of Din 1.2344 tool steel [Volume 7, Issue 26, 2017, Pages 105-118]
-
Montaseri, M. A.
Investigation and comparison of electromagnetic properties of epoxy-graphene and epoxy-carbon nanotube nanocomposites [Volume 7, Issue 26, 2017, Pages 85-94]
-
Mousavi Khoei, S. M.
Graphene nanosheets film by plasma electrolysis deposition [Volume 7, Issue 26, 2017, Pages 75-84]
-
Mousavi Khoie, S. M
Electrochemical Nucleation and Growth of Copper on Molybdenum Substrate: Effect of pH, Potential and Cleaning procedure [Volume 7, Issue 28, 2017, Pages 81-94]
-
Mousavi Shirazi, F
Stress and Fracture Analysis of a Fitting in Slug Catcher of Gas Refinery [Volume 7, Issue 27, 2017, Pages 95-112]
N
-
Naghshara, H
Comparison of oxygen and nitrogen plasmas for production of nano-composite layers of alumina and aluminium [Volume 7, Issue 27, 2017, Pages 57-66]
-
Najafi Birgani, E
Investigation on Effect of Aluminum on the Corrosion Resistance of Hadfield Austenitic Manganese Steel [Volume 7, Issue 27, 2017, Pages 1-14]
-
Nasirizadeh, N
Synthesis and Characterization of Temperature‐Sensitive Hydrogel Copolymer Based on N-isopropylacrylamide for Medical Applications [Volume 7, Issue 27, 2017, Pages 15-26]
-
Nayebi, B
Evaluation of Milling Time and Balls Diameters during Surface Mechanical Coating (SMC) in the Presence of Copper Powder and Nickel Balls [Volume 7, Issue 27, 2017, Pages 67-84]
-
Nemati, A
Hydration Resistance Improvement of MgO-CaO Refractories by the Addition of Nano-ZrO2 [Volume 7, Issue 28, 2017, Pages 135-148]
-
Niknezhad, M.
The Effect of Adding Nanodiamond Particles and Heat Treatment on Hardness and Wear Resistance of Ni-P-Nanodiamond Electroless Nanocomposite Coatings [Volume 7, Issue 26, 2017, Pages 59-74]
-
Nourbakhsh, A.A
Investigation of two step sintering on microstructure and compresive strenght of nano structured forsterite scaffold using lost foam [Volume 7, Issue 28, 2017, Pages 125-134]
P
-
Pakdell Noghabi, H.
Wear Properties of Al-Gr Composites Produced Using Liquid Homogenization Followed by Cold Press-Sintering [Volume 7, Issue 26, 2017, Pages 95-104]
-
Pourasad, J
Investigation of SiC graded coating formation mechanism on graphite by pack cemetation process and influenece of types of raw material [Volume 7, Issue 28, 2017, Pages 39-46]
R
-
Rafienia, M
Design and fabrication of electrochemical biosensor based on β-CD-Graphene nanocomposite for specific adsorption of curcumin, chlorpromazine and clomipramine [Volume 7, Issue 28, 2017, Pages 113-124]
-
Rahsepar, M
investigation the mechanism of the effect of clay nanoparticles on corrosion and wear resistance properties of epoxy nanocomposite coating applied to the surface of the carbon steel substrate [Volume 7, Issue 27, 2017, Pages 113-128]
-
Rayati Shavazi, M. R
Synthesis and Characterization of Temperature‐Sensitive Hydrogel Copolymer Based on N-isopropylacrylamide for Medical Applications [Volume 7, Issue 27, 2017, Pages 15-26]
S
-
Sabzi, m
Investigation on Effect of Aluminum on the Corrosion Resistance of Hadfield Austenitic Manganese Steel [Volume 7, Issue 27, 2017, Pages 1-14]
-
Safari, A
Investigation of Structure and Magnetic Properties of Ni Ferrite Powders Synthesized by Plasma Arc Discharge [Volume 7, Issue 28, 2017, Pages 17-26]
-
Sajjadi, S. A.
Wear Properties of Al-Gr Composites Produced Using Liquid Homogenization Followed by Cold Press-Sintering [Volume 7, Issue 26, 2017, Pages 95-104]
-
Shahedi Asl, M
Evaluation of Milling Time and Balls Diameters during Surface Mechanical Coating (SMC) in the Presence of Copper Powder and Nickel Balls [Volume 7, Issue 27, 2017, Pages 67-84]
-
Shahraki, A
Hydration Resistance Improvement of MgO-CaO Refractories by the Addition of Nano-ZrO2 [Volume 7, Issue 28, 2017, Pages 135-148]
-
Sharafi, S.
Fabrication, Structural Characterization and Magnetic Properties of Nanostructure Fe-Co-W Coatings Prepared by Electrodeposition [Volume 7, Issue 25, 2016, Pages 31-44]
-
Shariat, M.H
Optimization of parameters for tape casting of yttria stabilized zirconia (YSZ8) by Taguchi design for electrolyte solid oxide fuel cell [Volume 7, Issue 28, 2017, Pages 47-56]
-
Shayestefar, M.
Effect of pH on Production Process and Characteristics of Zirconium Carbide Nano Particles Synthesized by Sol-Gel Method [Volume 7, Issue 25, 2016, Pages 1-12]
-
Sheikhi Moghadam, K
Dry sliding wear behavior of Astaloy85Mo steel surface melted by gas tungsten arc welding [Volume 7, Issue 28, 2017, Pages 27-38]
-
Sobhanian, S
Comparison of oxygen and nitrogen plasmas for production of nano-composite layers of alumina and aluminium [Volume 7, Issue 27, 2017, Pages 57-66]
T
-
Tahavvori, R
The Study of the Effects Intermetallic Phases Formation on the Bond Strength and Electrical Resistivity of Al/Cu Bimetal produced by Compound Static Casting [Volume 7, Issue 27, 2017, Pages 27-44]
-
Tavassoli, S
The Study of the Effects Intermetallic Phases Formation on the Bond Strength and Electrical Resistivity of Al/Cu Bimetal produced by Compound Static Casting [Volume 7, Issue 27, 2017, Pages 27-44]
-
Tayebifard, S. A.
Synthesis of MoSi2-20%TiC Nanocomposite by Method Mechanical Activated Self-Propagation Combustion Synthesis (MASHS) [Volume 7, Issue 25, 2016, Pages 71-86]
Y
-
Yaftian, M.R
Study of tea compost column biofilter efficiency to remove some heavy metal ions from aqueous solutions [Volume 7, Issue 28, 2017, Pages 67-80]
-
Yazdipour, A. R
Effect of heat input on microstructure, mechanical properties and corrosion behavior of 5083-H321 aluminum alloy welded joint using P-MIG process [Volume 7, Issue 28, 2017, Pages 1-16]
-
Yousefzadeh, M
Comparison of oxygen and nitrogen plasmas for production of nano-composite layers of alumina and aluminium [Volume 7, Issue 27, 2017, Pages 57-66]
Z
-
Zakeri, M.
Synthesis of MoSi2-20%TiC Nanocomposite by Method Mechanical Activated Self-Propagation Combustion Synthesis (MASHS) [Volume 7, Issue 25, 2016, Pages 71-86]
-
Zamani, A.A
Study of tea compost column biofilter efficiency to remove some heavy metal ions from aqueous solutions [Volume 7, Issue 28, 2017, Pages 67-80]
-
Zarooni, M.
Investigation of Filler Metal on the Mechanical and Metallurgical Properties of Welding- Brazing Hybrid Joining of Aluminium to Ggalvanized Steel [Volume 7, Issue 25, 2016, Pages 59-70]
-
Zarrabi, A
Design and fabrication of electrochemical biosensor based on β-CD-Graphene nanocomposite for specific adsorption of curcumin, chlorpromazine and clomipramine [Volume 7, Issue 28, 2017, Pages 113-124]
-
Zebarjad, Seyed Mojtaba
An investigation on the effect of adhesive bonding strength on bending behavior of sandwich panels with Al A356/SiCp composite foam core [Volume 7, Issue 27, 2017, Pages 85-94]
-
Zebarjad, S. M.
Investigation of the Effect of Strain Rate on Tensile Properties of Polyurethane Using Eyring Model [Volume 7, Issue 25, 2016, Pages 23-30]
Your query does not match with any item