Keyword Index

A

  • Adhesive bonding An investigation on the effect of adhesive bonding strength on bending behavior of sandwich panels with Al A356/SiCp composite foam core [Volume 7, Issue 27, 2016, Pages 85-94]
  • Adsorption Study of tea compost column biofilter efficiency to remove some heavy metal ions from aqueous solutions [Volume 7, Issue 28, 2016, Pages 67-80]
  • AISI 321 steel Effect of temperature and time, the interlayer on microstructure and mechanical properties of Transient Liquid Phase (TLP) bonding of AISI321 stainless steel [Volume 7, Issue 28, 2016, Pages 95-112]
  • Al-Cu bimetal The Study of the Effects Intermetallic Phases Formation on the Bond Strength and Electrical Resistivity of Al/Cu Bimetal produced by Compound Static Casting [Volume 7, Issue 27, 2016, Pages 27-44]
  • Alloy The Experimental and Numerical Evaluation of the Residual Stress in the Hot Forming Sheet Process for 5083 Aluminum via the Gas Blowing Process [Volume 7, Issue 25, 2016, Pages 13-22]
  • Aluminum Foam An investigation on the effect of adhesive bonding strength on bending behavior of sandwich panels with Al A356/SiCp composite foam core [Volume 7, Issue 27, 2016, Pages 85-94]
  • Aluminum-matrix composite Wear Properties of Al-Gr Composites Produced Using Liquid Homogenization Followed by Cold Press-Sintering [Volume 7, Issue 26, 2016, Pages 95-104]
  • ARB process Characterization of mechanical and corrosion behaviour of multilayered Cu/Al/Al2O3 nano-composite produced by ARB process [Volume 7, Issue 28, 2016, Pages 149-162]
  • Astaloy85Mo Dry sliding wear behavior of Astaloy85Mo steel surface melted by gas tungsten arc welding [Volume 7, Issue 28, 2016, Pages 27-38]

B

  • Ball Diameter Evaluation of Milling Time and Balls Diameters during Surface Mechanical Coating (SMC) in the Presence of Copper Powder and Nickel Balls [Volume 7, Issue 27, 2016, Pages 67-84]

C

  • Carbon Nanotube Investigation and comparison of electromagnetic properties of epoxy-graphene and epoxy-carbon nanotube nanocomposites [Volume 7, Issue 26, 2016, Pages 85-94]
  • Cathodic plasma electrolysis Graphene nanosheets film by plasma electrolysis deposition [Volume 7, Issue 26, 2016, Pages 75-84]
  • Cation Distribution Structure, Microstructure, Magnetic and Electromagnetic Properties Ni-Mn-Zn Ferrite Produced by Glycine-Nitrate Process [Volume 7, Issue 27, 2016, Pages 45-56]
  • Cold press-sintering Wear Properties of Al-Gr Composites Produced Using Liquid Homogenization Followed by Cold Press-Sintering [Volume 7, Issue 26, 2016, Pages 95-104]
  • Combustion Synthesis Structure, Microstructure, Magnetic and Electromagnetic Properties Ni-Mn-Zn Ferrite Produced by Glycine-Nitrate Process [Volume 7, Issue 27, 2016, Pages 45-56]
  • Compound casting The Study of the Effects Intermetallic Phases Formation on the Bond Strength and Electrical Resistivity of Al/Cu Bimetal produced by Compound Static Casting [Volume 7, Issue 27, 2016, Pages 27-44]
  • Compressive strength Investigation of Mechanical Properties of Al-Al2O3 Composites Synthesized By Spark Plasma Sintering [Volume 7, Issue 26, 2016, Pages 49-58]
  • Continuous cooling The finite element analysis of applying the controlling pouer on the surface transformation hardening in the vicinity of discontinuity in the workpiece depth [Volume 7, Issue 26, 2016, Pages 1-18]
  • Copolymer Synthesis and Characterization of Temperature‐Sensitive Hydrogel Copolymer Based on N-isopropylacrylamide for Medical Applications [Volume 7, Issue 27, 2016, Pages 15-26]
  • Copper Electrochemical Nucleation and Growth of Copper on Molybdenum Substrate: Effect of pH, Potential and Cleaning procedure [Volume 7, Issue 28, 2016, Pages 81-94]
  • Corrosion investigation the mechanism of the effect of clay nanoparticles on corrosion and wear resistance properties of epoxy nanocomposite coating applied to the surface of the carbon steel substrate [Volume 7, Issue 27, 2016, Pages 113-128]
  • Corrosion properties Characterization of mechanical and corrosion behaviour of multilayered Cu/Al/Al2O3 nano-composite produced by ARB process [Volume 7, Issue 28, 2016, Pages 149-162]
  • Corrosion Resistance Investigation on Effect of Aluminum on the Corrosion Resistance of Hadfield Austenitic Manganese Steel [Volume 7, Issue 27, 2016, Pages 1-14]
  • Cu/Al/Al2O3 Nano-composite Characterization of mechanical and corrosion behaviour of multilayered Cu/Al/Al2O3 nano-composite produced by ARB process [Volume 7, Issue 28, 2016, Pages 149-162]
  • Cu Powder and Ni Ball Evaluation of Milling Time and Balls Diameters during Surface Mechanical Coating (SMC) in the Presence of Copper Powder and Nickel Balls [Volume 7, Issue 27, 2016, Pages 67-84]

D

  • Deep Cryogenic Treatment The effect of deep cryogenic treatment on the hardness and wear behavior of Din 1.2344 tool steel [Volume 7, Issue 26, 2016, Pages 105-118]
  • Density Optimization of parameters for tape casting of yttria stabilized zirconia (YSZ8) by Taguchi design for electrolyte solid oxide fuel cell [Volume 7, Issue 28, 2016, Pages 47-56]
  • Deposition of Alumina Comparison of oxygen and nitrogen plasmas for production of nano-composite layers of alumina and aluminium [Volume 7, Issue 27, 2016, Pages 57-66]
  • Deposition of Aluminum Comparison of oxygen and nitrogen plasmas for production of nano-composite layers of alumina and aluminium [Volume 7, Issue 27, 2016, Pages 57-66]
  • Drilling The Experimental and Numerical Evaluation of the Residual Stress in the Hot Forming Sheet Process for 5083 Aluminum via the Gas Blowing Process [Volume 7, Issue 25, 2016, Pages 13-22]

E

  • EDS analysis Producing WC-Co coating with electrolytic plasma processing on low carbon steel and investigation its wear resistance [Volume 7, Issue 28, 2016, Pages 57-66]
  • Electrochemical Impedance Spectroscopy Investigation on Effect of Aluminum on the Corrosion Resistance of Hadfield Austenitic Manganese Steel [Volume 7, Issue 27, 2016, Pages 1-14]
  • Electrodeposition Fabrication, Structural Characterization and Magnetic Properties of Nanostructure Fe-Co-W Coatings Prepared by Electrodeposition [Volume 7, Issue 25, 2016, Pages 31-44]
  • Electrodeposition Electrochemical Nucleation and Growth of Copper on Molybdenum Substrate: Effect of pH, Potential and Cleaning procedure [Volume 7, Issue 28, 2016, Pages 81-94]
  • Electrolyte Optimization of parameters for tape casting of yttria stabilized zirconia (YSZ8) by Taguchi design for electrolyte solid oxide fuel cell [Volume 7, Issue 28, 2016, Pages 47-56]
  • Electromagnetic Interference Shielding Investigation and comparison of electromagnetic properties of epoxy-graphene and epoxy-carbon nanotube nanocomposites [Volume 7, Issue 26, 2016, Pages 85-94]
  • Epoxy Investigation and comparison of electromagnetic properties of epoxy-graphene and epoxy-carbon nanotube nanocomposites [Volume 7, Issue 26, 2016, Pages 85-94]
  • Explosive welding Investigating the Effects of Heat Treatment in the Microstructure and Metallurgical Properties of the Explosive Welding of 304 Stainless Steel and CK45 Carbon Steel [Volume 7, Issue 26, 2016, Pages 19-34]
  • Eyring model Investigation of the Effect of Strain Rate on Tensile Properties of Polyurethane Using Eyring Model [Volume 7, Issue 25, 2016, Pages 23-30]

F

  • Fe−Co−W Fabrication, Structural Characterization and Magnetic Properties of Nanostructure Fe-Co-W Coatings Prepared by Electrodeposition [Volume 7, Issue 25, 2016, Pages 31-44]
  • Finite Element The Experimental and Numerical Evaluation of the Residual Stress in the Hot Forming Sheet Process for 5083 Aluminum via the Gas Blowing Process [Volume 7, Issue 25, 2016, Pages 13-22]
  • Finite element analysis The finite element analysis of applying the controlling pouer on the surface transformation hardening in the vicinity of discontinuity in the workpiece depth [Volume 7, Issue 26, 2016, Pages 1-18]
  • Fitting Stress and Fracture Analysis of a Fitting in Slug Catcher of Gas Refinery [Volume 7, Issue 27, 2016, Pages 95-112]
  • Forming The Experimental and Numerical Evaluation of the Residual Stress in the Hot Forming Sheet Process for 5083 Aluminum via the Gas Blowing Process [Volume 7, Issue 25, 2016, Pages 13-22]
  • Fracture Analysis Stress and Fracture Analysis of a Fitting in Slug Catcher of Gas Refinery [Volume 7, Issue 27, 2016, Pages 95-112]

G

  • Graphene Investigation and comparison of electromagnetic properties of epoxy-graphene and epoxy-carbon nanotube nanocomposites [Volume 7, Issue 26, 2016, Pages 85-94]
  • Graphene nanosheet film Graphene nanosheets film by plasma electrolysis deposition [Volume 7, Issue 26, 2016, Pages 75-84]
  • Graphene oxide Design and fabrication of electrochemical biosensor based on β-CD-Graphene nanocomposite for specific adsorption of curcumin, chlorpromazine and clomipramine [Volume 7, Issue 28, 2016, Pages 113-124]
  • Graphite Wear Properties of Al-Gr Composites Produced Using Liquid Homogenization Followed by Cold Press-Sintering [Volume 7, Issue 26, 2016, Pages 95-104]
  • Graphite Investigation of SiC graded coating formation mechanism on graphite by pack cemetation process and influenece of types of raw material [Volume 7, Issue 28, 2016, Pages 39-46]

H

  • Hadfield steel Investigation on Effect of Aluminum on the Corrosion Resistance of Hadfield Austenitic Manganese Steel [Volume 7, Issue 27, 2016, Pages 1-14]
  • Heat Treatment Investigating the Effects of Heat Treatment in the Microstructure and Metallurgical Properties of the Explosive Welding of 304 Stainless Steel and CK45 Carbon Steel [Volume 7, Issue 26, 2016, Pages 19-34]
  • Heat Treatment Investigation on Effect of Aluminum on the Corrosion Resistance of Hadfield Austenitic Manganese Steel [Volume 7, Issue 27, 2016, Pages 1-14]
  • Heavy Metals Study of tea compost column biofilter efficiency to remove some heavy metal ions from aqueous solutions [Volume 7, Issue 28, 2016, Pages 67-80]
  • HSC chemistry software Investigation of SiC graded coating formation mechanism on graphite by pack cemetation process and influenece of types of raw material [Volume 7, Issue 28, 2016, Pages 39-46]
  • Hydration Resistance Hydration Resistance Improvement of MgO-CaO Refractories by the Addition of Nano-ZrO2 [Volume 7, Issue 28, 2016, Pages 135-148]

I

  • Intermetallic Investigating the Effects of Heat Treatment in the Microstructure and Metallurgical Properties of the Explosive Welding of 304 Stainless Steel and CK45 Carbon Steel [Volume 7, Issue 26, 2016, Pages 19-34]
  • Intermetallic Compounds The Study of the Effects Intermetallic Phases Formation on the Bond Strength and Electrical Resistivity of Al/Cu Bimetal produced by Compound Static Casting [Volume 7, Issue 27, 2016, Pages 27-44]

K

  • Kinetic model The finite element analysis of applying the controlling pouer on the surface transformation hardening in the vicinity of discontinuity in the workpiece depth [Volume 7, Issue 26, 2016, Pages 1-18]

M

  • Magnesi-Doloma Hydration Resistance Improvement of MgO-CaO Refractories by the Addition of Nano-ZrO2 [Volume 7, Issue 28, 2016, Pages 135-148]
  • Magnetic property Fabrication, Structural Characterization and Magnetic Properties of Nanostructure Fe-Co-W Coatings Prepared by Electrodeposition [Volume 7, Issue 25, 2016, Pages 31-44]
  • MBF-30 and MBF-20 interlayers Effect of temperature and time, the interlayer on microstructure and mechanical properties of Transient Liquid Phase (TLP) bonding of AISI321 stainless steel [Volume 7, Issue 28, 2016, Pages 95-112]
  • Mechanical Activated Self-Propagation Combustion Synthesis (MASHS) Synthesis of MoSi2-20%TiC Nanocomposite by Method Mechanical Activated Self-Propagation Combustion Synthesis (MASHS) [Volume 7, Issue 25, 2016, Pages 71-86]
  • Mechanical Surface Coating (SMC) Evaluation of Milling Time and Balls Diameters during Surface Mechanical Coating (SMC) in the Presence of Copper Powder and Nickel Balls [Volume 7, Issue 27, 2016, Pages 67-84]
  • Mg alloy AZ63 The Effect of Twinning on Texture Evolution of AZ63 Magnesium Alloy During Hot Working [Volume 7, Issue 25, 2016, Pages 45-58]
  • Microstructure Characterization of mechanical and corrosion behaviour of multilayered Cu/Al/Al2O3 nano-composite produced by ARB process [Volume 7, Issue 28, 2016, Pages 149-162]
  • Microstructure Effect of heat input on microstructure, mechanical properties and corrosion behavior of 5083-H321 aluminum alloy welded joint using P-MIG process [Volume 7, Issue 28, 2016, Pages 1-16]
  • Microstructure Dry sliding wear behavior of Astaloy85Mo steel surface melted by gas tungsten arc welding [Volume 7, Issue 28, 2016, Pages 27-38]
  • Milling time Evaluation of Milling Time and Balls Diameters during Surface Mechanical Coating (SMC) in the Presence of Copper Powder and Nickel Balls [Volume 7, Issue 27, 2016, Pages 67-84]
  • Molybdenum Electrochemical Nucleation and Growth of Copper on Molybdenum Substrate: Effect of pH, Potential and Cleaning procedure [Volume 7, Issue 28, 2016, Pages 81-94]
  • Molybdenum Disilicide Synthesis of MoSi2-20%TiC Nanocomposite by Method Mechanical Activated Self-Propagation Combustion Synthesis (MASHS) [Volume 7, Issue 25, 2016, Pages 71-86]

N

  • Nanoclay investigation the mechanism of the effect of clay nanoparticles on corrosion and wear resistance properties of epoxy nanocomposite coating applied to the surface of the carbon steel substrate [Volume 7, Issue 27, 2016, Pages 113-128]
  • Nano-composite Photocatalytic degradation of reactive red 198 by TiO2-activated carbon nanocomposite [Volume 7, Issue 26, 2016, Pages 35-48]
  • Nanocomposite Synthesis of MoSi2-20%TiC Nanocomposite by Method Mechanical Activated Self-Propagation Combustion Synthesis (MASHS) [Volume 7, Issue 25, 2016, Pages 71-86]
  • Nanocomposite Investigation and comparison of electromagnetic properties of epoxy-graphene and epoxy-carbon nanotube nanocomposites [Volume 7, Issue 26, 2016, Pages 85-94]
  • Nanocomposite Design and fabrication of electrochemical biosensor based on β-CD-Graphene nanocomposite for specific adsorption of curcumin, chlorpromazine and clomipramine [Volume 7, Issue 28, 2016, Pages 113-124]
  • Nanocrystalline Ni-Mn-Zn Ferrites Structure, Microstructure, Magnetic and Electromagnetic Properties Ni-Mn-Zn Ferrite Produced by Glycine-Nitrate Process [Volume 7, Issue 27, 2016, Pages 45-56]
  • Nano Particle Effect of pH on Production Process and Characteristics of Zirconium Carbide Nano Particles Synthesized by Sol-Gel Method [Volume 7, Issue 25, 2016, Pages 1-12]
  • Nanostructure Fabrication, Structural Characterization and Magnetic Properties of Nanostructure Fe-Co-W Coatings Prepared by Electrodeposition [Volume 7, Issue 25, 2016, Pages 31-44]
  • Nano-ZrO2 Hydration Resistance Improvement of MgO-CaO Refractories by the Addition of Nano-ZrO2 [Volume 7, Issue 28, 2016, Pages 135-148]
  • Natural Adsorbent Study of tea compost column biofilter efficiency to remove some heavy metal ions from aqueous solutions [Volume 7, Issue 28, 2016, Pages 67-80]
  • Ni ferrite Investigation of Structure and Magnetic Properties of Ni Ferrite Powders Synthesized by Plasma Arc Discharge [Volume 7, Issue 28, 2016, Pages 17-26]
  • N-isopropyl acrylamide Synthesis and Characterization of Temperature‐Sensitive Hydrogel Copolymer Based on N-isopropylacrylamide for Medical Applications [Volume 7, Issue 27, 2016, Pages 15-26]
  • Nitrogen plasma Comparison of oxygen and nitrogen plasmas for production of nano-composite layers of alumina and aluminium [Volume 7, Issue 27, 2016, Pages 57-66]
  • Nucleation and Growth Electrochemical Nucleation and Growth of Copper on Molybdenum Substrate: Effect of pH, Potential and Cleaning procedure [Volume 7, Issue 28, 2016, Pages 81-94]

O

  • Oxygen plasma Comparison of oxygen and nitrogen plasmas for production of nano-composite layers of alumina and aluminium [Volume 7, Issue 27, 2016, Pages 57-66]

P

  • Particles Size Effect of pH on Production Process and Characteristics of Zirconium Carbide Nano Particles Synthesized by Sol-Gel Method [Volume 7, Issue 25, 2016, Pages 1-12]
  • Permeability Structure, Microstructure, Magnetic and Electromagnetic Properties Ni-Mn-Zn Ferrite Produced by Glycine-Nitrate Process [Volume 7, Issue 27, 2016, Pages 45-56]
  • Phase transformations The finite element analysis of applying the controlling pouer on the surface transformation hardening in the vicinity of discontinuity in the workpiece depth [Volume 7, Issue 26, 2016, Pages 1-18]
  • Photocatalytic Photocatalytic degradation of reactive red 198 by TiO2-activated carbon nanocomposite [Volume 7, Issue 26, 2016, Pages 35-48]
  • Plasma arc discharge process Investigation of Structure and Magnetic Properties of Ni Ferrite Powders Synthesized by Plasma Arc Discharge [Volume 7, Issue 28, 2016, Pages 17-26]
  • Plasma؛ Plasma spray Comparison of oxygen and nitrogen plasmas for production of nano-composite layers of alumina and aluminium [Volume 7, Issue 27, 2016, Pages 57-66]
  • Plasma torch coating Comparison of oxygen and nitrogen plasmas for production of nano-composite layers of alumina and aluminium [Volume 7, Issue 27, 2016, Pages 57-66]
  • Polyurethane Investigation of the Effect of Strain Rate on Tensile Properties of Polyurethane Using Eyring Model [Volume 7, Issue 25, 2016, Pages 23-30]
  • Polyvinyl Chloride (PVC) - Styrene Acrylonitrile (SAN) - nanoparticals- silver- titanium dioxide - Casting Preparation of UPVC/ SAN/Ag-TiO2 nanocomposite by casting method and characterization of its physical and mechanical properties [Volume 7, Issue 25, 2016, Pages 87-100]
  • Potentiodynamic Polarization Investigation on Effect of Aluminum on the Corrosion Resistance of Hadfield Austenitic Manganese Steel [Volume 7, Issue 27, 2016, Pages 1-14]
  • Pulsed MIG Effect of heat input on microstructure, mechanical properties and corrosion behavior of 5083-H321 aluminum alloy welded joint using P-MIG process [Volume 7, Issue 28, 2016, Pages 1-16]

R

  • Radical polymerization Synthesis and Characterization of Temperature‐Sensitive Hydrogel Copolymer Based on N-isopropylacrylamide for Medical Applications [Volume 7, Issue 27, 2016, Pages 15-26]
  • Raman spectroscopy Graphene nanosheets film by plasma electrolysis deposition [Volume 7, Issue 26, 2016, Pages 75-84]
  • Reactive red 198 Photocatalytic degradation of reactive red 198 by TiO2-activated carbon nanocomposite [Volume 7, Issue 26, 2016, Pages 35-48]
  • Refractories Hydration Resistance Improvement of MgO-CaO Refractories by the Addition of Nano-ZrO2 [Volume 7, Issue 28, 2016, Pages 135-148]
  • Residual Stress The Experimental and Numerical Evaluation of the Residual Stress in the Hot Forming Sheet Process for 5083 Aluminum via the Gas Blowing Process [Volume 7, Issue 25, 2016, Pages 13-22]
  • Retained Austenite The effect of deep cryogenic treatment on the hardness and wear behavior of Din 1.2344 tool steel [Volume 7, Issue 26, 2016, Pages 105-118]

S

  • Sandwich Panel An investigation on the effect of adhesive bonding strength on bending behavior of sandwich panels with Al A356/SiCp composite foam core [Volume 7, Issue 27, 2016, Pages 85-94]
  • Saturation Magnetization Structure, Microstructure, Magnetic and Electromagnetic Properties Ni-Mn-Zn Ferrite Produced by Glycine-Nitrate Process [Volume 7, Issue 27, 2016, Pages 45-56]
  • Saturation Magnetization Investigation of Structure and Magnetic Properties of Ni Ferrite Powders Synthesized by Plasma Arc Discharge [Volume 7, Issue 28, 2016, Pages 17-26]
  • Silicon carbide coating Investigation of SiC graded coating formation mechanism on graphite by pack cemetation process and influenece of types of raw material [Volume 7, Issue 28, 2016, Pages 39-46]
  • Slug Catcher Stress and Fracture Analysis of a Fitting in Slug Catcher of Gas Refinery [Volume 7, Issue 27, 2016, Pages 95-112]
  • Sol-Gel Effect of pH on Production Process and Characteristics of Zirconium Carbide Nano Particles Synthesized by Sol-Gel Method [Volume 7, Issue 25, 2016, Pages 1-12]
  • Spark plasma sintering Investigation of Mechanical Properties of Al-Al2O3 Composites Synthesized By Spark Plasma Sintering [Volume 7, Issue 26, 2016, Pages 49-58]
  • Spinel structure Investigation of Structure and Magnetic Properties of Ni Ferrite Powders Synthesized by Plasma Arc Discharge [Volume 7, Issue 28, 2016, Pages 17-26]
  • Standoff Investigating the Effects of Heat Treatment in the Microstructure and Metallurgical Properties of the Explosive Welding of 304 Stainless Steel and CK45 Carbon Steel [Volume 7, Issue 26, 2016, Pages 19-34]
  • Strain rate Investigation of the Effect of Strain Rate on Tensile Properties of Polyurethane Using Eyring Model [Volume 7, Issue 25, 2016, Pages 23-30]
  • Stress Analysis Stress and Fracture Analysis of a Fitting in Slug Catcher of Gas Refinery [Volume 7, Issue 27, 2016, Pages 95-112]
  • Surface melting Dry sliding wear behavior of Astaloy85Mo steel surface melted by gas tungsten arc welding [Volume 7, Issue 28, 2016, Pages 27-38]

T

  • Taguchi Design Optimization of parameters for tape casting of yttria stabilized zirconia (YSZ8) by Taguchi design for electrolyte solid oxide fuel cell [Volume 7, Issue 28, 2016, Pages 47-56]
  • Tape Casting Optimization of parameters for tape casting of yttria stabilized zirconia (YSZ8) by Taguchi design for electrolyte solid oxide fuel cell [Volume 7, Issue 28, 2016, Pages 47-56]
  • Tea Compost Study of tea compost column biofilter efficiency to remove some heavy metal ions from aqueous solutions [Volume 7, Issue 28, 2016, Pages 67-80]
  • Temperature‐Sensitive Hydrogel Synthesis and Characterization of Temperature‐Sensitive Hydrogel Copolymer Based on N-isopropylacrylamide for Medical Applications [Volume 7, Issue 27, 2016, Pages 15-26]
  • Texture The Effect of Twinning on Texture Evolution of AZ63 Magnesium Alloy During Hot Working [Volume 7, Issue 25, 2016, Pages 45-58]
  • TIG Dry sliding wear behavior of Astaloy85Mo steel surface melted by gas tungsten arc welding [Volume 7, Issue 28, 2016, Pages 27-38]
  • TiO2 Photocatalytic degradation of reactive red 198 by TiO2-activated carbon nanocomposite [Volume 7, Issue 26, 2016, Pages 35-48]
  • Titanium Carbide Synthesis of MoSi2-20%TiC Nanocomposite by Method Mechanical Activated Self-Propagation Combustion Synthesis (MASHS) [Volume 7, Issue 25, 2016, Pages 71-86]
  • TLP bonding Effect of temperature and time, the interlayer on microstructure and mechanical properties of Transient Liquid Phase (TLP) bonding of AISI321 stainless steel [Volume 7, Issue 28, 2016, Pages 95-112]
  • Two step sintering Investigation of two step sintering on microstructure and compresive strenght of nano structured forsterite scaffold using lost foam [Volume 7, Issue 28, 2016, Pages 125-134]

V

  • Vortex zone Investigating the Effects of Heat Treatment in the Microstructure and Metallurgical Properties of the Explosive Welding of 304 Stainless Steel and CK45 Carbon Steel [Volume 7, Issue 26, 2016, Pages 19-34]

W

  • Wear investigation the mechanism of the effect of clay nanoparticles on corrosion and wear resistance properties of epoxy nanocomposite coating applied to the surface of the carbon steel substrate [Volume 7, Issue 27, 2016, Pages 113-128]
  • Wear Dry sliding wear behavior of Astaloy85Mo steel surface melted by gas tungsten arc welding [Volume 7, Issue 28, 2016, Pages 27-38]
  • Wear properties, hardness Wear Properties of Al-Gr Composites Produced Using Liquid Homogenization Followed by Cold Press-Sintering [Volume 7, Issue 26, 2016, Pages 95-104]

Z

  • Zirconium Carbide Effect of pH on Production Process and Characteristics of Zirconium Carbide Nano Particles Synthesized by Sol-Gel Method [Volume 7, Issue 25, 2016, Pages 1-12]