A
-
Abbasi, Mehrdad
The effect of pin shape on microstructure and mechanical properties of HA-Ti surface composites produced by FSP method [Volume 14, Issue 52, 2024, Pages 73-87]
-
Abbasi, Milad
A new method for the green synthesis of Fe3O4 nanoparticles using Alliaceae plant extract and investigating their properties [Volume 14, Issue 53, 2024, Pages 35-52]
-
Aboutalebi, Mohammad Reza
Chemical and mineralogical characterization of Kahnuj ilmenite concentrate and investigation of its reduction behavior in pure hydrogen gas [Volume 14, Issue 51, 2023, Pages 58-69]
-
Adeli, Mandana
Chemical and mineralogical characterization of Kahnuj ilmenite concentrate and investigation of its reduction behavior in pure hydrogen gas [Volume 14, Issue 51, 2023, Pages 58-69]
-
Afkhami, Soheil
Investigating the Effect of Intercritical Annealing Heat Treatment on the Quenching and Partitioning of Ferrite-Bainite-Martensite Microphases in High-Silicon Low-Alloy DIN 1.5025 Steel [Volume 14, Issue 52, 2024, Pages 88-108]
-
Afkhami Karaei, Mohammad
Laboratory investigation of using a ternary polymer of itaconic acid-sodium polystyrene sulfonate-acrylamide as an inhibitor for calcium carbonate scaling in formation water [Volume 14, Issue 51, 2023, Pages 89-101]
-
Al Fadhli, Hind Khalaf Shayea
Effect of MoS2 Addition on High Temperature Wear Behavior of NiCrBSi Coating Produced by Thermal Spraying [Volume 14, Issue 52, 2024, Pages 61-72]
-
Avak, Karim
Investigating on the microstructure of cross-section and surface of Ti-10Mo alloy produced by selective laser melting [Volume 14, Issue 53, 2024, Pages 1-20]
-
Azadbeh, Maziyar
Aluminum nanocrystalline powder production from aluminum alloy scrap by solid state recycling method [Volume 14, Issue 51, 2023, Pages 1-16]
-
Azadbeh, Maziyar
Mo diffusion and In-situ formation of reinforcement in spark plasma sintering of powder mixed Ti-10Mo-1.5B4C composite at different temperatures and holding time [Volume 14, Issue 52, 2024, Pages 1-18]
-
Azadbeh, Maziyar
Investigating on the microstructure of cross-section and surface of Ti-10Mo alloy produced by selective laser melting [Volume 14, Issue 53, 2024, Pages 1-20]
-
Azadbeh, Maziyar
Spark plasma sintering of aluminum 3000 and 5000 alloys powder obtained from recycling of Used Beverage Cans (UBCs) [Volume 14, Issue 54, 2024, Pages 17-34]
-
Azimifar, Farhad
Effect of MoS2 Addition on High Temperature Wear Behavior of NiCrBSi Coating Produced by Thermal Spraying [Volume 14, Issue 52, 2024, Pages 61-72]
B
-
Bonyadi, Mohammad
Synthesis and Characterization of Activated Carbon Photocatalyst Modified with ZnO/SnO2 Nanoparticles and Its Application in the Municipal Wastewater Treatment with Advanced Oxidation Process [Volume 14, Issue 52, 2024, Pages 42-60]
D
-
Dabiri, Adolreza
Laboratory investigation of using a ternary polymer of itaconic acid-sodium polystyrene sulfonate-acrylamide as an inhibitor for calcium carbonate scaling in formation water [Volume 14, Issue 51, 2023, Pages 89-101]
E
-
Eslami, Samira
Investigating on the microstructure of cross-section and surface of Ti-10Mo alloy produced by selective laser melting [Volume 14, Issue 53, 2024, Pages 1-20]
-
Ezadi, Hadi
A Review of the Most Important Methods for Severe Plastic Deformation of Titanium [Volume 14, Issue 52, 2024, Pages 19-41]
F
-
Farhangi, Hassan
Microstructural Characterization and Damage Mechanism of the First Stage Blade GE MS9001 After Long-term Exposure [Volume 14, Issue 51, 2023, Pages 58-69]
G
-
Ghahremani, AliReza
Fabrication of silver conductive lines by spray deposition method [Volume 14, Issue 53, 2024, Pages 91-102]
-
Ghasemi, Leila
Chemical and mineralogical characterization of Kahnuj ilmenite concentrate and investigation of its reduction behavior in pure hydrogen gas [Volume 14, Issue 51, 2023, Pages 58-69]
-
Ghasemi Banadkouki, Seyyed Sadegh
Investigating the Effect of Intercritical Annealing Heat Treatment on the Quenching and Partitioning of Ferrite-Bainite-Martensite Microphases in High-Silicon Low-Alloy DIN 1.5025 Steel [Volume 14, Issue 52, 2024, Pages 88-108]
-
Ghorbani, Hassan
Microstructural Characterization and Damage Mechanism of the First Stage Blade GE MS9001 After Long-term Exposure [Volume 14, Issue 51, 2023, Pages 58-69]
H
-
Hashemi, Babak
Investigating the effect of replacing CaO with CaF2 on bioactivity and compressive strength of 45S5 glass ceramic synthesized from soda-lime glass waste by solid state method [Volume 14, Issue 51, 2023, Pages 39-57]
-
Hayati, Raziye
Synthesis and Characterization of Activated Carbon Photocatalyst Modified with ZnO/SnO2 Nanoparticles and Its Application in the Municipal Wastewater Treatment with Advanced Oxidation Process [Volume 14, Issue 52, 2024, Pages 42-60]
-
Hayati, Raziye
Synthesis and characterization of bio-nanocomposite of FeOOH-AC and its application in the removal of methyl orange anionic dye [Volume 14, Issue 53, 2024, Pages 69-90]
-
Heidarian, Adel
Comparison of properties of zinc, zinc/nickel, zinc/nickel/manganese phosphate coatings on 41Cr4 steel substrate [Volume 14, Issue 53, 2024, Pages 53-68]
J
-
Jahanbakhshi nejad, Amirali
Synthesis and Characterization of Activated Carbon Photocatalyst Modified with ZnO/SnO2 Nanoparticles and Its Application in the Municipal Wastewater Treatment with Advanced Oxidation Process [Volume 14, Issue 52, 2024, Pages 42-60]
-
Jalali, Ali
A Review of the Most Important Methods for Severe Plastic Deformation of Titanium [Volume 14, Issue 52, 2024, Pages 19-41]
-
Jangjou, Ali
A new method for the green synthesis of Fe3O4 nanoparticles using Alliaceae plant extract and investigating their properties [Volume 14, Issue 53, 2024, Pages 35-52]
-
Javid, Ali
Preysler polyoxometalate supported on functionalized graphene oxide nanoparticles: synthesis, identification and investigation of its catalytic activity [Volume 14, Issue 54, 2024, Pages 1-16]
K
-
Kasaei, Seyed Reza
A new method for the green synthesis of Fe3O4 nanoparticles using Alliaceae plant extract and investigating their properties [Volume 14, Issue 53, 2024, Pages 35-52]
-
Khalaj, Gholamreza
Investigating the effect of different sources of magnesium oxide on the structure and final properties of wall tile bodies containing CaO using rapid firing method [Volume 14, Issue 51, 2023, Pages 17-38]
-
Khalaj, Gholamreza
Comparison of properties of zinc, zinc/nickel, zinc/nickel/manganese phosphate coatings on 41Cr4 steel substrate [Volume 14, Issue 53, 2024, Pages 53-68]
M
-
Mahmoud Hosseiny, Amir Hossein
Investigating the effect of different sources of magnesium oxide on the structure and final properties of wall tile bodies containing CaO using rapid firing method [Volume 14, Issue 51, 2023, Pages 17-38]
-
Malekan, Mehdi
Microstructural Characterization and Damage Mechanism of the First Stage Blade GE MS9001 After Long-term Exposure [Volume 14, Issue 51, 2023, Pages 58-69]
-
Maraki, Mohammadreza
A Review of the Most Important Methods for Severe Plastic Deformation of Titanium [Volume 14, Issue 52, 2024, Pages 19-41]
-
Mashreghi, Ali
Fabrication of silver conductive lines by spray deposition method [Volume 14, Issue 53, 2024, Pages 91-102]
-
Moshrefifar, Masoud
Investigating the effect of silicon content on structure and corrosion resistance by plasma electrolytic oxidation on aluminum-silicon alloys [Volume 14, Issue 53, 2024, Pages 21-34]
-
Mosleh Shirazi, Sareh
A new method for the green synthesis of Fe3O4 nanoparticles using Alliaceae plant extract and investigating their properties [Volume 14, Issue 53, 2024, Pages 35-52]
N
-
Najafi, Abolhassan
Investigating the effect of different sources of magnesium oxide on the structure and final properties of wall tile bodies containing CaO using rapid firing method [Volume 14, Issue 51, 2023, Pages 17-38]
-
Najafi, Abolhassan
Comparison of properties of zinc, zinc/nickel, zinc/nickel/manganese phosphate coatings on 41Cr4 steel substrate [Volume 14, Issue 53, 2024, Pages 53-68]
-
Norozian, Afsar
Investigating the effect of replacing CaO with CaF2 on bioactivity and compressive strength of 45S5 glass ceramic synthesized from soda-lime glass waste by solid state method [Volume 14, Issue 51, 2023, Pages 39-57]
O
-
Ojaghi, Mehdi
Investigating on the microstructure of cross-section and surface of Ti-10Mo alloy produced by selective laser melting [Volume 14, Issue 53, 2024, Pages 1-20]
P
-
Pashangeh, Shima
Investigating the Effect of Intercritical Annealing Heat Treatment on the Quenching and Partitioning of Ferrite-Bainite-Martensite Microphases in High-Silicon Low-Alloy DIN 1.5025 Steel [Volume 14, Issue 52, 2024, Pages 88-108]
R
-
Ranjbari, Marjan
Mo diffusion and In-situ formation of reinforcement in spark plasma sintering of powder mixed Ti-10Mo-1.5B4C composite at different temperatures and holding time [Volume 14, Issue 52, 2024, Pages 1-18]
-
Razazi Boroujeni, Mohammad
Effect of MoS2 Addition on High Temperature Wear Behavior of NiCrBSi Coating Produced by Thermal Spraying [Volume 14, Issue 52, 2024, Pages 61-72]
-
Rezazadeh, Hadi
Aluminum nanocrystalline powder production from aluminum alloy scrap by solid state recycling method [Volume 14, Issue 51, 2023, Pages 1-16]
-
Rezazadeh, Hadi
Spark plasma sintering of aluminum 3000 and 5000 alloys powder obtained from recycling of Used Beverage Cans (UBCs) [Volume 14, Issue 54, 2024, Pages 17-34]
S
-
Sabahi Namini, Abbas
Mo diffusion and In-situ formation of reinforcement in spark plasma sintering of powder mixed Ti-10Mo-1.5B4C composite at different temperatures and holding time [Volume 14, Issue 52, 2024, Pages 1-18]
-
Sabet, Hamed
The effect of pin shape on microstructure and mechanical properties of HA-Ti surface composites produced by FSP method [Volume 14, Issue 52, 2024, Pages 73-87]
-
Sedehi, Sayyed Mohammadreza
A Review of the Most Important Methods for Severe Plastic Deformation of Titanium [Volume 14, Issue 52, 2024, Pages 19-41]
-
Seyedein, Seyed Hossein
Chemical and mineralogical characterization of Kahnuj ilmenite concentrate and investigation of its reduction behavior in pure hydrogen gas [Volume 14, Issue 51, 2023, Pages 58-69]
-
Shahbaz, Amirhosein
The effect of pin shape on microstructure and mechanical properties of HA-Ti surface composites produced by FSP method [Volume 14, Issue 52, 2024, Pages 73-87]
-
Sharififard, Hakimeh
Synthesis and Characterization of Activated Carbon Photocatalyst Modified with ZnO/SnO2 Nanoparticles and Its Application in the Municipal Wastewater Treatment with Advanced Oxidation Process [Volume 14, Issue 52, 2024, Pages 42-60]
-
Sharififard, Hakimeh
Synthesis and characterization of bio-nanocomposite of FeOOH-AC and its application in the removal of methyl orange anionic dye [Volume 14, Issue 53, 2024, Pages 69-90]
V
-
Vaez, Ahmad
A new method for the green synthesis of Fe3O4 nanoparticles using Alliaceae plant extract and investigating their properties [Volume 14, Issue 53, 2024, Pages 35-52]
-
Vafa, Ehsan
A new method for the green synthesis of Fe3O4 nanoparticles using Alliaceae plant extract and investigating their properties [Volume 14, Issue 53, 2024, Pages 35-52]
Your query does not match with any item