Author Index

A

  • Abareshi, M Investigation of Antibacterial Properties of Silver Nanoparticles and Polyethylene-Silver Nanocomposites [Volume 6, Issue 22, 2016, Pages 159-168]
  • Abbasi, S.M. Effect of Strain Rate on the Hot Tensile Behavior of Invar Alloy [Volume 6, Issue 23, 2016, Pages 31-38]
  • Abdi, I Investigation of Antibacterial Properties of Silver Nanoparticles and Polyethylene-Silver Nanocomposites [Volume 6, Issue 22, 2016, Pages 159-168]
  • Ahmadi Moghadam, H An Studying on the Synthesis and Densification Behavior of β''- Alumina Electrolyte for Sodium-Sulfur Batteries [Volume 6, Issue 22, 2016, Pages 137-146]
  • Alaei, A.R. Microstructure, Hardness and Wear Resistance of the Hard Layer Containing Silicon Carbide Particles on ASTM A106 Steel Produced by GTAW Welding [Volume 6, Issue 21, 2016, Pages 121-136]
  • Ali mirzaloo, V. Investigation of effective parameters in the sandwich and conventional rolling process of the thin steel sheet using the finite element method [Volume 6, Issue 24, 2016, Pages 77-94]
  • Alizadeh, M. The Effect of Annealing Temperature on The Structure and Corrosion Behavior of Nano-Quasicrystalline Al72Ni13Cr15 alloy Synthesized by Mechanical Alloying [Volume 6, Issue 21, 2016, Pages 161-176]
  • Alizadeh, S The Effect of Sodium Hexametaphosphate on the Physical and Mechanical Properties of Monolithic Refractories Prepared from the Wastes of Magnesia - Carbon Bricks [Volume 6, Issue 22, 2016, Pages 45-54]
  • Amini, K Study of Phase Transformation in Martensitic Stainless Steel AISI 422 During Continuous Cooling [Volume 6, Issue 22, 2016, Pages 79-90]
  • Amini, K. An Investigation on the effect of adding copper sulfate on the properties and corrosion resistance of electroless nickel-phosphorus coating [Volume 6, Issue 24, 2016, Pages 1-12]
  • Amini, M. The Effect of Annealing Temperature on The Structure and Corrosion Behavior of Nano-Quasicrystalline Al72Ni13Cr15 alloy Synthesized by Mechanical Alloying [Volume 6, Issue 21, 2016, Pages 161-176]
  • Amini, R. The Effect of Annealing Temperature on The Structure and Corrosion Behavior of Nano-Quasicrystalline Al72Ni13Cr15 alloy Synthesized by Mechanical Alloying [Volume 6, Issue 21, 2016, Pages 161-176]
  • Amirabadizade, S. R Determination Optimum Boron Quantity Effect on Low Temperature Impact Energy of Mild Steel Weld Metal that Fabricated by Submerge Arc Welding (SAW) [Volume 6, Issue 21, 2016, Pages 19-36]
  • Amoozegar, A Effect of Si/Al Ratio on Physicochemical Properties of Nanostructured LaAPSO-34 for Conversion of Methanol to Light Olefins [Volume 6, Issue 22, 2016, Pages 91-110]
  • Ashouri, Gh. A. Effect of Ultrasonic Impact Treatment on Fatigue Behavior of Steel Welded Pipes in Petrochemical Corrosive Environment [Volume 6, Issue 21, 2016, Pages 83-96]
  • Azadbeh, M. Gravitational Effects on Compact Shaping and Microstructure during Supersolidus Liquid Phase Sintering of Cu-10Sn-10Pb [Volume 6, Issue 23, 2016, Pages 127-138]
  • Azadfalah, M Production of Porous Carbon Nanoparticles by Usingzinc Layered Gallate Nanohybrid Precursors and Investigate Its Aapplications as Polymeric Fuel Cell Cathode Catalyst [Volume 6, Issue 22, 2016, Pages 111-126]
  • Azizieh, M Feasibilty Study of AZ31/Al2O3 Surface Nanocomposite Fabrication Via Friction Stir Processing [Volume 6, Issue 22, 2016, Pages 65-78]

B

  • Babakhani, A Investigation and Simulation of Quasi-Static Perforation Test on Sandwich Panels with Al A356/SiCp Composite Foam Core [Volume 6, Issue 22, 2016, Pages 13-28]
  • Bahrololoom, M.E. The formation process of nanocrystalline permalloy by electroplating and optimization the surface conditions for alloy coatings [Volume 6, Issue 23, 2016, Pages 89-100]
  • Boroujerdnia, M Feasibilty Study of AZ31/Al2O3 Surface Nanocomposite Fabrication Via Friction Stir Processing [Volume 6, Issue 22, 2016, Pages 65-78]

D

  • Daavari, M. Effect of Ultrasonic Impact Treatment on Fatigue Behavior of Steel Welded Pipes in Petrochemical Corrosive Environment [Volume 6, Issue 21, 2016, Pages 83-96]
  • Dallali Isfahani, T. Investigating the effect of tungsten and heat treatment on microstructure and wear behavior of Ni-hard 4 cast iron [Volume 6, Issue 24, 2016, Pages 13-28]
  • Danesh Manesh, H. Investigation of microstructure and hardness of surface composite AA5086(H116)/ZrO2 and surface hybrid composite AA5086(H116)/ZrO2/Gr fabricated by friction stir processing [Volume 6, Issue 23, 2016, Pages 101-114]
  • Dehnavi, M. Effect of Cooling Rate and Grain Refining Agents on Microstructure Characteristics of Al-Cu Alloys by Computer- Aided Cooling Curve Method [Volume 6, Issue 23, 2016, Pages 75-88]

E

  • Ebrahimi, R. A Survey of Mechanism and Kinetic of Oxidation of Welding Lines in Austenitic Stainless Steel AISI321 [Volume 6, Issue 21, 2016, Pages 109-120]
  • Emami, A.H. An Investigation on the effect of adding copper sulfate on the properties and corrosion resistance of electroless nickel-phosphorus coating [Volume 6, Issue 24, 2016, Pages 1-12]

F

  • Farshoud, A. An Investigation on the effect of adding copper sulfate on the properties and corrosion resistance of electroless nickel-phosphorus coating [Volume 6, Issue 24, 2016, Pages 1-12]
  • Fazel, A. The performance of self-assembled thin film of imidazole used in organic-inorganic hybrid coating on ‎corrosion inhibition of carbon steel in acidic solution [Volume 6, Issue 23, 2016, Pages 61-74]
  • Fazli, S. The formation process of nanocrystalline permalloy by electroplating and optimization the surface conditions for alloy coatings [Volume 6, Issue 23, 2016, Pages 89-100]
  • Fehri, S. M. k. Investigation of Role of both Nucleating Agent and Plasticizer on Physical, Mechanical and Thermal Properties of Poly(Lactic Acid) [Volume 6, Issue 21, 2016, Pages 53-60]

G

  • Ghanbari, S Study of Phase Transformation in Martensitic Stainless Steel AISI 422 During Continuous Cooling [Volume 6, Issue 22, 2016, Pages 79-90]
  • Gheisari, Kh The Effect of Milling Time and Sintering Temperature on the Microstructure and Mechanical Properties of Al/20% SiC Composite Prepared by Powder Metallurgy [Volume 6, Issue 22, 2016, Pages 147-158]
  • Golestani-Fard, F Enhancement of Local Corrosion Resistance of CP-Titanium in H2SO4 Solution via Plasma Electrolytic Oxidation [Volume 6, Issue 22, 2016, Pages 127-136]
  • Golestanipour, M Investigation and Simulation of Quasi-Static Perforation Test on Sandwich Panels with Al A356/SiCp Composite Foam Core [Volume 6, Issue 22, 2016, Pages 13-28]

H

  • Haddad-Sabzevar, M. Effect of Cooling Rate and Grain Refining Agents on Microstructure Characteristics of Al-Cu Alloys by Computer- Aided Cooling Curve Method [Volume 6, Issue 23, 2016, Pages 75-88]
  • Hadianfard, M. j. Improvement in Mechanical Properties of Medical Stainless Steels by Using Liquid-Phase Sintering [Volume 6, Issue 21, 2016, Pages 73-82]
  • Haghighi, M Effect of Si/Al Ratio on Physicochemical Properties of Nanostructured LaAPSO-34 for Conversion of Methanol to Light Olefins [Volume 6, Issue 22, 2016, Pages 91-110]
  • Haghighi, M. The Effect of Annealing Temperature on The Structure and Corrosion Behavior of Nano-Quasicrystalline Al72Ni13Cr15 alloy Synthesized by Mechanical Alloying [Volume 6, Issue 21, 2016, Pages 161-176]
  • Hassanzadeh Aghdam, M. K. Statistical Micromechanical Analysis of the Effects of Fiber Random Distribution on the Mechanical Properties of Fibrous Composites [Volume 6, Issue 21, 2016, Pages 137-160]
  • Heydarzadeh Sohi, M. Effect of Aluminum Content in Pack Cementation Mixture on Microstructure and Cyclic Oxidation Performance of Zr-modified Aluminide Coatings [Volume 6, Issue 23, 2016, Pages 19-30]
  • H. Ghayour, H. Ghayour Investigating the effect of tungsten and heat treatment on microstructure and wear behavior of Ni-hard 4 cast iron [Volume 6, Issue 24, 2016, Pages 13-28]
  • Hosseini, B. Magnesiothermal synthesis of nanostructured SiC from natural zeolite (clinoptilolite),sacarose and mesoporous carbon CMK-1 under Argon atmospher [Volume 6, Issue 23, 2016, Pages 139-148]

J

  • Janghorban, K. Investigation of microstructure and hardness of surface composite AA5086(H116)/ZrO2 and surface hybrid composite AA5086(H116)/ZrO2/Gr fabricated by friction stir processing [Volume 6, Issue 23, 2016, Pages 101-114]
  • Javadpour, S. Investigating the Cyclic Oxidation and Hot Corrosion of Nanostructured CoNiCrAlYSi Coatings Applied by HVOF Process [Volume 6, Issue 21, 2016, Pages 97-108]
  • Javadpour, S. Flexural Properties of Epoxy Matrix Composites Reinforced by Milled Fibers [Volume 6, Issue 23, 2016, Pages 47-60]
  • Javadpour, S. Investigating the Tribological Behavior of Epoxy Matrix Composites Reinforced by Milled Fibers [Volume 6, Issue 24, 2016, Pages 51-62]
  • Javanbakht, M. Improvement in Mechanical Properties of Medical Stainless Steels by Using Liquid-Phase Sintering [Volume 6, Issue 21, 2016, Pages 73-82]

K

  • Karamian, E The Effect of Sodium Hexametaphosphate on the Physical and Mechanical Properties of Monolithic Refractories Prepared from the Wastes of Magnesia - Carbon Bricks [Volume 6, Issue 22, 2016, Pages 45-54]
  • Karimi, S. Flexural Properties of Epoxy Matrix Composites Reinforced by Milled Fibers [Volume 6, Issue 23, 2016, Pages 47-60]
  • Karimi, S. Investigating the Tribological Behavior of Epoxy Matrix Composites Reinforced by Milled Fibers [Volume 6, Issue 24, 2016, Pages 51-62]
  • Karimi Taghanaki, A. Investigating the effect of tungsten and heat treatment on microstructure and wear behavior of Ni-hard 4 cast iron [Volume 6, Issue 24, 2016, Pages 13-28]
  • Kazeminezhad, M. The effect of severe plastic deformation on the natural ageing behavior of aluminum alloy 2024 [Volume 6, Issue 23, 2016, Pages 39-46]
  • Khakpour, I Effect of Aluminum Content in Pack Cementation Mixture on Microstructure and Cyclic Oxidation Performance of Zr-modified Aluminide Coatings [Volume 6, Issue 23, 2016, Pages 19-30]
  • Khani Moghanaki, S. The effect of severe plastic deformation on the natural ageing behavior of aluminum alloy 2024 [Volume 6, Issue 23, 2016, Pages 39-46]
  • Kiani-Rashid, A. R Effects of Alumina Particles and Carbon Monoxide Gas Bubbles Within the Melt on the Graphite Morphology and Microstructure of Gray Cast Iron [Volume 6, Issue 22, 2016, Pages 1-12]

L

  • Lazzeri, A. Investigation of Role of both Nucleating Agent and Plasticizer on Physical, Mechanical and Thermal Properties of Poly(Lactic Acid) [Volume 6, Issue 21, 2016, Pages 53-60]

M

  • Mahdavi, R. Effect of Strain Rate on the Hot Tensile Behavior of Invar Alloy [Volume 6, Issue 23, 2016, Pages 31-38]
  • Mahmoodi, M. J. Statistical Micromechanical Analysis of the Effects of Fiber Random Distribution on the Mechanical Properties of Fibrous Composites [Volume 6, Issue 21, 2016, Pages 137-160]
  • Masroor, H. Investigation of microstructure and hardness of surface composite AA5086(H116)/ZrO2 and surface hybrid composite AA5086(H116)/ZrO2/Gr fabricated by friction stir processing [Volume 6, Issue 23, 2016, Pages 101-114]
  • Mazaheri, H. Microstructure, Hardness and Wear Resistance of the Hard Layer Containing Silicon Carbide Particles on ASTM A106 Steel Produced by GTAW Welding [Volume 6, Issue 21, 2016, Pages 121-136]
  • Mirbagher, S.M.H Assessment of Aging Cycle for Coupering Its Aluminum Composite Foams with (A356-4% Cu) and A356 Foam Mechanical Behavior [Volume 6, Issue 21, 2016, Pages 37-52]
  • Mirdamadi, Sh Determination Optimum Boron Quantity Effect on Low Temperature Impact Energy of Mild Steel Weld Metal that Fabricated by Submerge Arc Welding (SAW) [Volume 6, Issue 21, 2016, Pages 19-36]
  • Mirhosseini, S. S Production of Porous Carbon Nanoparticles by Usingzinc Layered Gallate Nanohybrid Precursors and Investigate Its Aapplications as Polymeric Fuel Cell Cathode Catalyst [Volume 6, Issue 22, 2016, Pages 111-126]
  • Moeinifar, M.S. Fracture Resistance Improvement of Micro Alloy Steel Weld in Four Wire Submerged Arc Welding by applying One and Two Thermal Cycles [Volume 6, Issue 23, 2016, Pages 115-126]
  • Moenifar, S. Investigation on the Effects of Using Salt Water Bathroom Quenching on the Corrosion Behavior of Hadfield Manganese Steel [Volume 6, Issue 24, 2016, Pages 29-38]
  • Mohammadi, S. Determination of the Effects of Milling Atmosphere on the Production Process and Characteristics of Boron Nanopowders [Volume 6, Issue 24, 2016, Pages 63-76]
  • Mohsenzadeh, R. The effect of calcium carbonate particles on the wear behavior of nano-composite gear PA6/PP/Nano CaCO3 [Volume 6, Issue 24, 2016, Pages 95-106]
  • Momeni, F Investigation of Zinc metallic coating properties formed on low carbon steel in alkaline and sulfate electrolytes by plasma electrolytic saturation [Volume 6, Issue 23, 2016, Pages 1-18]
  • Monshi, A The Effect of Sodium Hexametaphosphate on the Physical and Mechanical Properties of Monolithic Refractories Prepared from the Wastes of Magnesia - Carbon Bricks [Volume 6, Issue 22, 2016, Pages 45-54]
  • Montakhabi, S. The effect of calcium carbonate particles on the wear behavior of nano-composite gear PA6/PP/Nano CaCO3 [Volume 6, Issue 24, 2016, Pages 95-106]
  • Morakabati, M. Effect of Strain Rate on the Hot Tensile Behavior of Invar Alloy [Volume 6, Issue 23, 2016, Pages 31-38]
  • Mosadegh, B Microstructure and Mechanical Properties of Plain Low Carbon Steel Processed by Integrated Extrusion and Equal Channel Angular Pressing (Ex-ECAP) [Volume 6, Issue 22, 2016, Pages 55-64]
  • Mousapour, M. Gravitational Effects on Compact Shaping and Microstructure during Supersolidus Liquid Phase Sintering of Cu-10Sn-10Pb [Volume 6, Issue 23, 2016, Pages 127-138]
  • Mousavi Khoee, M Investigation of Zinc metallic coating properties formed on low carbon steel in alkaline and sulfate electrolytes by plasma electrolytic saturation [Volume 6, Issue 23, 2016, Pages 1-18]

N

  • Najafi Birgani, E. Investigation on the Effects of Using Salt Water Bathroom Quenching on the Corrosion Behavior of Hadfield Manganese Steel [Volume 6, Issue 24, 2016, Pages 29-38]
  • Nasiri, H Synthesis of Zirconium Diboride Via Carbothermal, Borothermal, and Borocarbothermal Activation Methods [Volume 6, Issue 22, 2016, Pages 169-180]
  • Nasr-e Isfahani, M. The performance of self-assembled thin film of imidazole used in organic-inorganic hybrid coating on ‎corrosion inhibition of carbon steel in acidic solution [Volume 6, Issue 23, 2016, Pages 61-74]
  • Nemati, Z. The Effect of Annealing Temperature on The Structure and Corrosion Behavior of Nano-Quasicrystalline Al72Ni13Cr15 alloy Synthesized by Mechanical Alloying [Volume 6, Issue 21, 2016, Pages 161-176]
  • Niazi, H Enhancement of Local Corrosion Resistance of CP-Titanium in H2SO4 Solution via Plasma Electrolytic Oxidation [Volume 6, Issue 22, 2016, Pages 127-136]
  • Nourbakhsh, A.A. Magnesiothermal synthesis of nanostructured SiC from natural zeolite (clinoptilolite),sacarose and mesoporous carbon CMK-1 under Argon atmospher [Volume 6, Issue 23, 2016, Pages 139-148]

O

  • Ojaghi, M. Gravitational Effects on Compact Shaping and Microstructure during Supersolidus Liquid Phase Sintering of Cu-10Sn-10Pb [Volume 6, Issue 23, 2016, Pages 127-138]
  • Otroj, S Synthesis of Zirconium Diboride Via Carbothermal, Borothermal, and Borocarbothermal Activation Methods [Volume 6, Issue 22, 2016, Pages 169-180]

P

  • Paaydar, M. H An Studying on the Synthesis and Densification Behavior of β''- Alumina Electrolyte for Sodium-Sulfur Batteries [Volume 6, Issue 22, 2016, Pages 137-146]
  • Pahlavani, A. Effect of Strain Rate on the Hot Tensile Behavior of Invar Alloy [Volume 6, Issue 23, 2016, Pages 31-38]

R

  • Rakhshkhorshid, M. Modeling the hot deformation flow curves of API X65 pipeline steel using the exponential law equation [Volume 6, Issue 24, 2016, Pages 39-50]
  • Reihanian, M The Effect of Milling Time and Sintering Temperature on the Microstructure and Mechanical Properties of Al/20% SiC Composite Prepared by Powder Metallurgy [Volume 6, Issue 22, 2016, Pages 147-158]

S

  • Sabet, H Determination Optimum Boron Quantity Effect on Low Temperature Impact Energy of Mild Steel Weld Metal that Fabricated by Submerge Arc Welding (SAW) [Volume 6, Issue 21, 2016, Pages 19-36]
  • Sabzi, M. Investigation on the Effects of Using Salt Water Bathroom Quenching on the Corrosion Behavior of Hadfield Manganese Steel [Volume 6, Issue 24, 2016, Pages 29-38]
  • SadoughVanini, S. A. Effect of Ultrasonic Impact Treatment on Fatigue Behavior of Steel Welded Pipes in Petrochemical Corrosive Environment [Volume 6, Issue 21, 2016, Pages 83-96]
  • Salahinejad, E. Improvement in Mechanical Properties of Medical Stainless Steels by Using Liquid-Phase Sintering [Volume 6, Issue 21, 2016, Pages 73-82]
  • Sazegaran, H Effects of Alumina Particles and Carbon Monoxide Gas Bubbles Within the Melt on the Graphite Morphology and Microstructure of Gray Cast Iron [Volume 6, Issue 22, 2016, Pages 1-12]
  • Seifolazadeh, A. Determination of the Effects of Milling Atmosphere on the Production Process and Characteristics of Boron Nanopowders [Volume 6, Issue 24, 2016, Pages 63-76]
  • Shaban Ghazani, M Microstructure and Mechanical Properties of Plain Low Carbon Steel Processed by Integrated Extrusion and Equal Channel Angular Pressing (Ex-ECAP) [Volume 6, Issue 22, 2016, Pages 55-64]
  • Shafinia, Sh Determination Optimum Boron Quantity Effect on Low Temperature Impact Energy of Mild Steel Weld Metal that Fabricated by Submerge Arc Welding (SAW) [Volume 6, Issue 21, 2016, Pages 19-36]
  • Shafyei, A Study of Phase Transformation in Martensitic Stainless Steel AISI 422 During Continuous Cooling [Volume 6, Issue 22, 2016, Pages 79-90]
  • Shahmiri, M Enhancement of Local Corrosion Resistance of CP-Titanium in H2SO4 Solution via Plasma Electrolytic Oxidation [Volume 6, Issue 22, 2016, Pages 127-136]
  • Shah mohammadian, F. Investigating the effect of tungsten and heat treatment on microstructure and wear behavior of Ni-hard 4 cast iron [Volume 6, Issue 24, 2016, Pages 13-28]
  • Shakouri, Z Microstructure Evaluation of Acrylonitril-Butadiene Copolymer Nanocomposites Reinforced by Nano-Calcium Carbonate by Permeability Test [Volume 6, Issue 22, 2016, Pages 29-44]
  • Shariat, M.H. Investigating the Cyclic Oxidation and Hot Corrosion of Nanostructured CoNiCrAlYSi Coatings Applied by HVOF Process [Volume 6, Issue 21, 2016, Pages 97-108]
  • Sharifi, H Synthesis of Zirconium Diboride Via Carbothermal, Borothermal, and Borocarbothermal Activation Methods [Volume 6, Issue 22, 2016, Pages 169-180]
  • Shelesh Nezhad, K. The effect of calcium carbonate particles on the wear behavior of nano-composite gear PA6/PP/Nano CaCO3 [Volume 6, Issue 24, 2016, Pages 95-106]
  • Soltani, H. Assessment of Aging Cycle for Coupering Its Aluminum Composite Foams with (A356-4% Cu) and A356 Foam Mechanical Behavior [Volume 6, Issue 21, 2016, Pages 37-52]
  • Soltani, M.A Study of Phase Transformation in Martensitic Stainless Steel AISI 422 During Continuous Cooling [Volume 6, Issue 22, 2016, Pages 79-90]
  • Soltani, R. Effect of Aluminum Content in Pack Cementation Mixture on Microstructure and Cyclic Oxidation Performance of Zr-modified Aluminide Coatings [Volume 6, Issue 23, 2016, Pages 19-30]
  • Soltaninzhad, Sh. A Survey of Mechanism and Kinetic of Oxidation of Welding Lines in Austenitic Stainless Steel AISI321 [Volume 6, Issue 21, 2016, Pages 109-120]
  • Soltanzadeh, M. The effect of calcium carbonate particles on the wear behavior of nano-composite gear PA6/PP/Nano CaCO3 [Volume 6, Issue 24, 2016, Pages 95-106]

T

  • Tahviliyan, A Synthesis of Zirconium Diboride Via Carbothermal, Borothermal, and Borocarbothermal Activation Methods [Volume 6, Issue 22, 2016, Pages 169-180]
  • Tajbakhsh, M. Electroless Deposition of Ni-P/nanoPTFE Composite Coating and Investigation of Its Properties [Volume 6, Issue 21, 2016, Pages 61-72]
  • Talavari, N The Effect of Milling Time and Sintering Temperature on the Microstructure and Mechanical Properties of Al/20% SiC Composite Prepared by Powder Metallurgy [Volume 6, Issue 22, 2016, Pages 147-158]

V

  • Vajd, A Microstructure and Mechanical Properties of Plain Low Carbon Steel Processed by Integrated Extrusion and Equal Channel Angular Pressing (Ex-ECAP) [Volume 6, Issue 22, 2016, Pages 55-64]
  • Valie, H. Assessment of Aging Cycle for Coupering Its Aluminum Composite Foams with (A356-4% Cu) and A356 Foam Mechanical Behavior [Volume 6, Issue 21, 2016, Pages 37-52]

Y

  • Yaghoubi, S The Effect of Fiber Breakage Caused by Transient Shear Stress Distribution in Single-Lap Adhesive Joint Composite Material [Volume 6, Issue 21, 2016, Pages 1-18]
  • Yaghtin, A.H. Investigating the Cyclic Oxidation and Hot Corrosion of Nanostructured CoNiCrAlYSi Coatings Applied by HVOF Process [Volume 6, Issue 21, 2016, Pages 97-108]

Z

  • Zareh, M.A. The Effect of Annealing Temperature on The Structure and Corrosion Behavior of Nano-Quasicrystalline Al72Ni13Cr15 alloy Synthesized by Mechanical Alloying [Volume 6, Issue 21, 2016, Pages 161-176]
  • Zebarjad, S. M Investigation and Simulation of Quasi-Static Perforation Test on Sandwich Panels with Al A356/SiCp Composite Foam Core [Volume 6, Issue 22, 2016, Pages 13-28]
  • Zebarjad, S. M. Investigation of Role of both Nucleating Agent and Plasticizer on Physical, Mechanical and Thermal Properties of Poly(Lactic Acid) [Volume 6, Issue 21, 2016, Pages 53-60]
  • Zendeh Del, M. The performance of self-assembled thin film of imidazole used in organic-inorganic hybrid coating on ‎corrosion inhibition of carbon steel in acidic solution [Volume 6, Issue 23, 2016, Pages 61-74]