A
-
A106-B Steel Pipes
Effect of Ultrasonic Impact Treatment on Fatigue Behavior of Steel Welded Pipes in Petrochemical Corrosive Environment [Volume 6, Issue 21, 2016, Pages 83-96]
-
A356 Aluminum Foam
Assessment of Aging Cycle for Coupering Its Aluminum Composite Foams with (A356-4% Cu) and A356 Foam Mechanical Behavior [Volume 6, Issue 21, 2016, Pages 37-52]
-
AA2024
The effect of severe plastic deformation on the natural ageing behavior of aluminum alloy 2024 [Volume 6, Issue 23, 2016, Pages 39-46]
-
AA5086
Investigation of microstructure and hardness of surface composite AA5086(H116)/ZrO2 and surface hybrid composite AA5086(H116)/ZrO2/Gr fabricated by friction stir processing [Volume 6, Issue 23, 2016, Pages 101-114]
-
Absorption Energy
Assessment of Aging Cycle for Coupering Its Aluminum Composite Foams with (A356-4% Cu) and A356 Foam Mechanical Behavior [Volume 6, Issue 21, 2016, Pages 37-52]
-
Acicular Ferrite
Determination Optimum Boron Quantity Effect on Low Temperature Impact Energy of Mild Steel Weld Metal that Fabricated by Submerge Arc Welding (SAW) [Volume 6, Issue 21, 2016, Pages 19-36]
-
Activation energy
Effect of Strain Rate on the Hot Tensile Behavior of Invar Alloy [Volume 6, Issue 23, 2016, Pages 31-38]
-
Adhesive Joint
The Effect of Fiber Breakage Caused by Transient Shear Stress Distribution in Single-Lap Adhesive Joint Composite Material [Volume 6, Issue 21, 2016, Pages 1-18]
-
Aging Heat Treatment
Assessment of Aging Cycle for Coupering Its Aluminum Composite Foams with (A356-4% Cu) and A356 Foam Mechanical Behavior [Volume 6, Issue 21, 2016, Pages 37-52]
-
Al-5Ti-1B Grain Refiner
Effect of Cooling Rate and Grain Refining Agents on Microstructure Characteristics of Al-Cu Alloys by Computer- Aided Cooling Curve Method [Volume 6, Issue 23, 2016, Pages 75-88]
-
Al-Cu alloys
Effect of Cooling Rate and Grain Refining Agents on Microstructure Characteristics of Al-Cu Alloys by Computer- Aided Cooling Curve Method [Volume 6, Issue 23, 2016, Pages 75-88]
-
Alumina Particles
Effects of Alumina Particles and Carbon Monoxide Gas Bubbles Within the Melt on the Graphite Morphology and Microstructure of Gray Cast Iron [Volume 6, Issue 22, 2016, Pages 1-12]
-
Aluminum Alloy
Investigation of microstructure and hardness of surface composite AA5086(H116)/ZrO2 and surface hybrid composite AA5086(H116)/ZrO2/Gr fabricated by friction stir processing [Volume 6, Issue 23, 2016, Pages 101-114]
-
Aluminum Foam
Investigation and Simulation of Quasi-Static Perforation Test on Sandwich Panels with Al A356/SiCp Composite Foam Core [Volume 6, Issue 22, 2016, Pages 13-28]
-
Antibacterial Property
Investigation of Antibacterial Properties of Silver Nanoparticles and Polyethylene-Silver Nanocomposites [Volume 6, Issue 22, 2016, Pages 159-168]
-
API X65 pipeline steel
Modeling the hot deformation flow curves of API X65 pipeline steel using the exponential law equation [Volume 6, Issue 24, 2016, Pages 39-50]
-
Austenitic stainless steel
A Survey of Mechanism and Kinetic of Oxidation of Welding Lines in Austenitic Stainless Steel AISI321 [Volume 6, Issue 21, 2016, Pages 109-120]
B
-
Ball Mill
Determination of the Effects of Milling Atmosphere on the Production Process and Characteristics of Boron Nanopowders [Volume 6, Issue 24, 2016, Pages 63-76]
-
Bending test
Flexural Properties of Epoxy Matrix Composites Reinforced by
Milled Fibers [Volume 6, Issue 23, 2016, Pages 47-60]
-
Bond Coat
Effect of Aluminum Content in Pack Cementation Mixture on Microstructure and Cyclic Oxidation Performance of Zr-modified Aluminide Coatings [Volume 6, Issue 23, 2016, Pages 19-30]
-
Borocarbothermal
Synthesis of Zirconium Diboride Via Carbothermal, Borothermal, and Borocarbothermal Activation Methods [Volume 6, Issue 22, 2016, Pages 169-180]
-
Boron
Determination Optimum Boron Quantity Effect on Low Temperature Impact Energy of Mild Steel Weld Metal that Fabricated by Submerge Arc Welding (SAW) [Volume 6, Issue 21, 2016, Pages 19-36]
-
Boron Nanoparticles
Determination of the Effects of Milling Atmosphere on the Production Process and Characteristics of Boron Nanopowders [Volume 6, Issue 24, 2016, Pages 63-76]
-
Borothermal
Synthesis of Zirconium Diboride Via Carbothermal, Borothermal, and Borocarbothermal Activation Methods [Volume 6, Issue 22, 2016, Pages 169-180]
-
Bulk Nano-Structured Carbon Steel
Microstructure and Mechanical Properties of Plain Low Carbon Steel Processed by Integrated Extrusion and Equal Channel Angular Pressing (Ex-ECAP) [Volume 6, Issue 22, 2016, Pages 55-64]
C
-
Carbon
The Effect of Sodium Hexametaphosphate on the Physical and Mechanical Properties of Monolithic Refractories Prepared from the Wastes of Magnesia - Carbon Bricks [Volume 6, Issue 22, 2016, Pages 45-54]
-
Carbon fiber
Flexural Properties of Epoxy Matrix Composites Reinforced by
Milled Fibers [Volume 6, Issue 23, 2016, Pages 47-60]
-
Carbon fiber
Investigating the Tribological Behavior of Epoxy Matrix Composites Reinforced by Milled Fibers [Volume 6, Issue 24, 2016, Pages 51-62]
-
Carbon Monoxide Bubbles
Effects of Alumina Particles and Carbon Monoxide Gas Bubbles Within the Melt on the Graphite Morphology and Microstructure of Gray Cast Iron [Volume 6, Issue 22, 2016, Pages 1-12]
-
Carbothermal
Synthesis of Zirconium Diboride Via Carbothermal, Borothermal, and Borocarbothermal Activation Methods [Volume 6, Issue 22, 2016, Pages 169-180]
-
Cathode¸ Linear Sweep Voltammetry
Production of Porous Carbon Nanoparticles by Usingzinc Layered Gallate Nanohybrid Precursors and Investigate Its Aapplications as Polymeric Fuel Cell Cathode Catalyst [Volume 6, Issue 22, 2016, Pages 111-126]
-
CCT Diagram
Study of Phase Transformation in Martensitic Stainless Steel AISI 422 During Continuous Cooling [Volume 6, Issue 22, 2016, Pages 79-90]
-
Clinoptilolite zeolite
Magnesiothermal synthesis of nanostructured SiC from natural zeolite (clinoptilolite),sacarose and mesoporous carbon CMK-1 under Argon atmospher [Volume 6, Issue 23, 2016, Pages 139-148]
-
Composite Materials
The Effect of Fiber Breakage Caused by Transient Shear Stress Distribution in Single-Lap Adhesive Joint Composite Material [Volume 6, Issue 21, 2016, Pages 1-18]
-
CoNiCrAlYSi
Investigating the Cyclic Oxidation and Hot Corrosion of Nanostructured CoNiCrAlYSi Coatings Applied by HVOF Process [Volume 6, Issue 21, 2016, Pages 97-108]
-
Constitutive equations
Modeling the hot deformation flow curves of API X65 pipeline steel using the exponential law equation [Volume 6, Issue 24, 2016, Pages 39-50]
-
Cooling Curve
Effect of Cooling Rate and Grain Refining Agents on Microstructure Characteristics of Al-Cu Alloys by Computer- Aided Cooling Curve Method [Volume 6, Issue 23, 2016, Pages 75-88]
-
Copper
Assessment of Aging Cycle for Coupering Its Aluminum Composite Foams with (A356-4% Cu) and A356 Foam Mechanical Behavior [Volume 6, Issue 21, 2016, Pages 37-52]
-
Copper sulfate
An Investigation on the effect of adding copper sulfate on the properties and corrosion resistance of electroless nickel-phosphorus coating [Volume 6, Issue 24, 2016, Pages 1-12]
-
Corrosion
An Investigation on the effect of adding copper sulfate on the properties and corrosion resistance of electroless nickel-phosphorus coating [Volume 6, Issue 24, 2016, Pages 1-12]
-
Corrosion Fatigue Life
Effect of Ultrasonic Impact Treatment on Fatigue Behavior of Steel Welded Pipes in Petrochemical Corrosive Environment [Volume 6, Issue 21, 2016, Pages 83-96]
-
Corrosion Resistance
Investigation of Zinc metallic coating properties formed on low carbon steel in alkaline and sulfate electrolytes by plasma electrolytic saturation [Volume 6, Issue 23, 2016, Pages 1-18]
-
Cryo Milling
Investigating the Cyclic Oxidation and Hot Corrosion of Nanostructured CoNiCrAlYSi Coatings Applied by HVOF Process [Volume 6, Issue 21, 2016, Pages 97-108]
D
-
DEFORM2D
Investigation of effective parameters in the sandwich and conventional rolling process of the thin steel sheet using the finite element method [Volume 6, Issue 24, 2016, Pages 77-94]
-
Dilatometery
Study of Phase Transformation in Martensitic Stainless Steel AISI 422 During Continuous Cooling [Volume 6, Issue 22, 2016, Pages 79-90]
E
-
Electroless nickel-phosphorus
An Investigation on the effect of adding copper sulfate on the properties and corrosion resistance of electroless nickel-phosphorus coating [Volume 6, Issue 24, 2016, Pages 1-12]
-
Electroplating
The formation process of nanocrystalline permalloy by electroplating and optimization the surface conditions for alloy coatings [Volume 6, Issue 23, 2016, Pages 89-100]
-
Elephant foot
Gravitational Effects on Compact Shaping and Microstructure during Supersolidus Liquid Phase Sintering of Cu-10Sn-10Pb [Volume 6, Issue 23, 2016, Pages 127-138]
-
Energy Absorption
Investigation and Simulation of Quasi-Static Perforation Test on Sandwich Panels with Al A356/SiCp Composite Foam Core [Volume 6, Issue 22, 2016, Pages 13-28]
-
Epoxy matrix composite
Flexural Properties of Epoxy Matrix Composites Reinforced by
Milled Fibers [Volume 6, Issue 23, 2016, Pages 47-60]
-
Epoxy matrix composite
Investigating the Tribological Behavior of Epoxy Matrix Composites Reinforced by Milled Fibers [Volume 6, Issue 24, 2016, Pages 51-62]
-
Exponential equation
Modeling the hot deformation flow curves of API X65 pipeline steel using the exponential law equation [Volume 6, Issue 24, 2016, Pages 39-50]
F
-
Fibers
The Effect of Fiber Breakage Caused by Transient Shear Stress Distribution in Single-Lap Adhesive Joint Composite Material [Volume 6, Issue 21, 2016, Pages 1-18]
-
Fibrous Composites
Statistical Micromechanical Analysis of the Effects of Fiber Random Distribution on the Mechanical Properties of Fibrous Composites [Volume 6, Issue 21, 2016, Pages 137-160]
-
Finite Element
Investigation of effective parameters in the sandwich and conventional rolling process of the thin steel sheet using the finite element method [Volume 6, Issue 24, 2016, Pages 77-94]
-
Finite element analysis
Investigation and Simulation of Quasi-Static Perforation Test on Sandwich Panels with Al A356/SiCp Composite Foam Core [Volume 6, Issue 22, 2016, Pages 13-28]
-
Fracture energy
Fracture Resistance Improvement of Micro Alloy Steel Weld in Four Wire Submerged Arc Welding by applying One and Two Thermal Cycles [Volume 6, Issue 23, 2016, Pages 115-126]
-
Friction stir processing (FSP)
Investigation of microstructure and hardness of surface composite AA5086(H116)/ZrO2 and surface hybrid composite AA5086(H116)/ZrO2/Gr fabricated by friction stir processing [Volume 6, Issue 23, 2016, Pages 101-114]
G
-
Gas tungsten arc welding
Microstructure, Hardness and Wear Resistance of the Hard Layer Containing Silicon Carbide Particles on ASTM A106 Steel Produced by GTAW Welding [Volume 6, Issue 21, 2016, Pages 121-136]
-
Glass fiber
Flexural Properties of Epoxy Matrix Composites Reinforced by
Milled Fibers [Volume 6, Issue 23, 2016, Pages 47-60]
-
Glass fiber
Investigating the Tribological Behavior of Epoxy Matrix Composites Reinforced by Milled Fibers [Volume 6, Issue 24, 2016, Pages 51-62]
-
Grain size
Effect of Cooling Rate and Grain Refining Agents on Microstructure Characteristics of Al-Cu Alloys by Computer- Aided Cooling Curve Method [Volume 6, Issue 23, 2016, Pages 75-88]
-
Graphite Morphology
Effects of Alumina Particles and Carbon Monoxide Gas Bubbles Within the Melt on the Graphite Morphology and Microstructure of Gray Cast Iron [Volume 6, Issue 22, 2016, Pages 1-12]
-
Gravity
Gravitational Effects on Compact Shaping and Microstructure during Supersolidus Liquid Phase Sintering of Cu-10Sn-10Pb [Volume 6, Issue 23, 2016, Pages 127-138]
-
Gray Cast Iron
Effects of Alumina Particles and Carbon Monoxide Gas Bubbles Within the Melt on the Graphite Morphology and Microstructure of Gray Cast Iron [Volume 6, Issue 22, 2016, Pages 1-12]
H
-
Heat Treatment
Electroless Deposition of Ni-P/nanoPTFE Composite Coating and Investigation of Its Properties [Volume 6, Issue 21, 2016, Pages 61-72]
-
Heat Treatment
Investigating the effect of tungsten and heat treatment on microstructure and wear behavior of Ni-hard 4 cast iron [Volume 6, Issue 24, 2016, Pages 13-28]
-
Heat Treatment
Investigation on the Effects of Using Salt Water Bathroom Quenching on the Corrosion Behavior of Hadfield Manganese Steel [Volume 6, Issue 24, 2016, Pages 29-38]
-
Hot Corrosion
Investigating the Cyclic Oxidation and Hot Corrosion of Nanostructured CoNiCrAlYSi Coatings Applied by HVOF Process [Volume 6, Issue 21, 2016, Pages 97-108]
-
Hot deformation processes
Modeling the hot deformation flow curves of API X65 pipeline steel using the exponential law equation [Volume 6, Issue 24, 2016, Pages 39-50]
-
Hot tensile test
Effect of Strain Rate on the Hot Tensile Behavior of Invar Alloy [Volume 6, Issue 23, 2016, Pages 31-38]
-
HVOF
Investigating the Cyclic Oxidation and Hot Corrosion of Nanostructured CoNiCrAlYSi Coatings Applied by HVOF Process [Volume 6, Issue 21, 2016, Pages 97-108]
-
Hypothesis Testing
Statistical Micromechanical Analysis of the Effects of Fiber Random Distribution on the Mechanical Properties of Fibrous Composites [Volume 6, Issue 21, 2016, Pages 137-160]
I
-
Intergranular failure
Effect of Strain Rate on the Hot Tensile Behavior of Invar Alloy [Volume 6, Issue 23, 2016, Pages 31-38]
-
Invar alloy
Effect of Strain Rate on the Hot Tensile Behavior of Invar Alloy [Volume 6, Issue 23, 2016, Pages 31-38]
L
-
LaAPSO-34
Effect of Si/Al Ratio on Physicochemical Properties of Nanostructured LaAPSO-34 for Conversion of Methanol to Light Olefins [Volume 6, Issue 22, 2016, Pages 91-110]
-
Light Olefins
Effect of Si/Al Ratio on Physicochemical Properties of Nanostructured LaAPSO-34 for Conversion of Methanol to Light Olefins [Volume 6, Issue 22, 2016, Pages 91-110]
-
Liquid-Phase Sintering
Improvement in Mechanical Properties of Medical Stainless Steels by Using Liquid-Phase Sintering [Volume 6, Issue 21, 2016, Pages 73-82]
-
Local Corrosion
Enhancement of Local Corrosion Resistance of CP-Titanium in H2SO4 Solution via Plasma Electrolytic Oxidation [Volume 6, Issue 22, 2016, Pages 127-136]
-
Low Carbon Steel
Determination Optimum Boron Quantity Effect on Low Temperature Impact Energy of Mild Steel Weld Metal that Fabricated by Submerge Arc Welding (SAW) [Volume 6, Issue 21, 2016, Pages 19-36]
M
-
Magnesia
The Effect of Sodium Hexametaphosphate on the Physical and Mechanical Properties of Monolithic Refractories Prepared from the Wastes of Magnesia - Carbon Bricks [Volume 6, Issue 22, 2016, Pages 45-54]
-
Magnesiothermal synthesis
Magnesiothermal synthesis of nanostructured SiC from natural zeolite (clinoptilolite),sacarose and mesoporous carbon CMK-1 under Argon atmospher [Volume 6, Issue 23, 2016, Pages 139-148]
-
Magnesium Alloy AZ31
Feasibilty Study of AZ31/Al2O3 Surface Nanocomposite Fabrication Via Friction Stir Processing [Volume 6, Issue 22, 2016, Pages 65-78]
-
Martensite/Austenite
Fracture Resistance Improvement of Micro Alloy Steel Weld in Four Wire Submerged Arc Welding by applying One and Two Thermal Cycles [Volume 6, Issue 23, 2016, Pages 115-126]
-
Mechanical milling
The Effect of Milling Time and Sintering Temperature on the Microstructure and Mechanical Properties of Al/20% SiC Composite Prepared by Powder Metallurgy [Volume 6, Issue 22, 2016, Pages 147-158]
-
Mesoporous carbon
Magnesiothermal synthesis of nanostructured SiC from natural zeolite (clinoptilolite),sacarose and mesoporous carbon CMK-1 under Argon atmospher [Volume 6, Issue 23, 2016, Pages 139-148]
-
Methanol
Effect of Si/Al Ratio on Physicochemical Properties of Nanostructured LaAPSO-34 for Conversion of Methanol to Light Olefins [Volume 6, Issue 22, 2016, Pages 91-110]
-
Micro alloy steel
Fracture Resistance Improvement of Micro Alloy Steel Weld in Four Wire Submerged Arc Welding by applying One and Two Thermal Cycles [Volume 6, Issue 23, 2016, Pages 115-126]
-
Micro Hardness
Electroless Deposition of Ni-P/nanoPTFE Composite Coating and Investigation of Its Properties [Volume 6, Issue 21, 2016, Pages 61-72]
-
Micromechanics
Statistical Micromechanical Analysis of the Effects of Fiber Random Distribution on the Mechanical Properties of Fibrous Composites [Volume 6, Issue 21, 2016, Pages 137-160]
-
Microstructural gradient
Gravitational Effects on Compact Shaping and Microstructure during Supersolidus Liquid Phase Sintering of Cu-10Sn-10Pb [Volume 6, Issue 23, 2016, Pages 127-138]
-
Microstructure
Microstructure Evaluation of Acrylonitril-Butadiene Copolymer Nanocomposites Reinforced by Nano-Calcium Carbonate by Permeability Test [Volume 6, Issue 22, 2016, Pages 29-44]
-
Microstructure
Feasibilty Study of AZ31/Al2O3 Surface Nanocomposite Fabrication Via Friction Stir Processing [Volume 6, Issue 22, 2016, Pages 65-78]
-
Microstructure
An Studying on the Synthesis and Densification Behavior of β''- Alumina Electrolyte for Sodium-Sulfur Batteries [Volume 6, Issue 22, 2016, Pages 137-146]
-
Microstructure
An Investigation on the effect of adding copper sulfate on the properties and corrosion resistance of electroless nickel-phosphorus coating [Volume 6, Issue 24, 2016, Pages 1-12]
-
Milling
Flexural Properties of Epoxy Matrix Composites Reinforced by
Milled Fibers [Volume 6, Issue 23, 2016, Pages 47-60]
-
Milling
Investigating the Tribological Behavior of Epoxy Matrix Composites Reinforced by Milled Fibers [Volume 6, Issue 24, 2016, Pages 51-62]
-
Milling Atmosphere
Determination of the Effects of Milling Atmosphere on the Production Process and Characteristics of Boron Nanopowders [Volume 6, Issue 24, 2016, Pages 63-76]
-
Milling time
The Effect of Milling Time and Sintering Temperature on the Microstructure and Mechanical Properties of Al/20% SiC Composite Prepared by Powder Metallurgy [Volume 6, Issue 22, 2016, Pages 147-158]
-
Monolithic Refractories
The Effect of Sodium Hexametaphosphate on the Physical and Mechanical Properties of Monolithic Refractories Prepared from the Wastes of Magnesia - Carbon Bricks [Volume 6, Issue 22, 2016, Pages 45-54]
-
MTO
Effect of Si/Al Ratio on Physicochemical Properties of Nanostructured LaAPSO-34 for Conversion of Methanol to Light Olefins [Volume 6, Issue 22, 2016, Pages 91-110]
N
-
Na2SO4 1M
The Effect of Annealing Temperature on The Structure and Corrosion Behavior of Nano-Quasicrystalline Al72Ni13Cr15 alloy Synthesized by Mechanical Alloying [Volume 6, Issue 21, 2016, Pages 161-176]
-
NaCl 3.5%
The Effect of Annealing Temperature on The Structure and Corrosion Behavior of Nano-Quasicrystalline Al72Ni13Cr15 alloy Synthesized by Mechanical Alloying [Volume 6, Issue 21, 2016, Pages 161-176]
-
Nano-CaCO3
The effect of calcium carbonate particles on the wear behavior of nano-composite gear PA6/PP/Nano CaCO3 [Volume 6, Issue 24, 2016, Pages 95-106]
-
Nano-Calcium Carbonate
Microstructure Evaluation of Acrylonitril-Butadiene Copolymer Nanocomposites Reinforced by Nano-Calcium Carbonate by Permeability Test [Volume 6, Issue 22, 2016, Pages 29-44]
-
Nanocomposite
Microstructure Evaluation of Acrylonitril-Butadiene Copolymer Nanocomposites Reinforced by Nano-Calcium Carbonate by Permeability Test [Volume 6, Issue 22, 2016, Pages 29-44]
-
Nanocomposite
Investigation of Antibacterial Properties of Silver Nanoparticles and Polyethylene-Silver Nanocomposites [Volume 6, Issue 22, 2016, Pages 159-168]
-
Nano Composites Hardness
Feasibilty Study of AZ31/Al2O3 Surface Nanocomposite Fabrication Via Friction Stir Processing [Volume 6, Issue 22, 2016, Pages 65-78]
-
Nano Quasicrystalline
The Effect of Annealing Temperature on The Structure and Corrosion Behavior of Nano-Quasicrystalline Al72Ni13Cr15 alloy Synthesized by Mechanical Alloying [Volume 6, Issue 21, 2016, Pages 161-176]
-
Nanostructured silicon carbide
Magnesiothermal synthesis of nanostructured SiC from natural zeolite (clinoptilolite),sacarose and mesoporous carbon CMK-1 under Argon atmospher [Volume 6, Issue 23, 2016, Pages 139-148]
-
Natural ageing
The effect of severe plastic deformation on the natural ageing behavior of aluminum alloy 2024 [Volume 6, Issue 23, 2016, Pages 39-46]
-
Ni-hard 4 cast iron
Investigating the effect of tungsten and heat treatment on microstructure and wear behavior of Ni-hard 4 cast iron [Volume 6, Issue 24, 2016, Pages 13-28]
-
Nucleating Agent
Investigation of Role of both Nucleating Agent and Plasticizer on Physical, Mechanical and Thermal Properties of Poly(Lactic Acid) [Volume 6, Issue 21, 2016, Pages 53-60]
O
-
Organic-Inorganic Nanohybrid
Production of Porous Carbon Nanoparticles by Usingzinc Layered Gallate Nanohybrid Precursors and Investigate Its Aapplications as Polymeric Fuel Cell Cathode Catalyst [Volume 6, Issue 22, 2016, Pages 111-126]
-
Oxidation
A Survey of Mechanism and Kinetic of Oxidation of Welding Lines in Austenitic Stainless Steel AISI321 [Volume 6, Issue 21, 2016, Pages 109-120]
P
-
PA6
The effect of calcium carbonate particles on the wear behavior of nano-composite gear PA6/PP/Nano CaCO3 [Volume 6, Issue 24, 2016, Pages 95-106]
-
Permeability
Microstructure Evaluation of Acrylonitril-Butadiene Copolymer Nanocomposites Reinforced by Nano-Calcium Carbonate by Permeability Test [Volume 6, Issue 22, 2016, Pages 29-44]
-
Phase Transformation
Study of Phase Transformation in Martensitic Stainless Steel AISI 422 During Continuous Cooling [Volume 6, Issue 22, 2016, Pages 79-90]
-
Plasma Electrolytic Saturation
Investigation of Zinc metallic coating properties formed on low carbon steel in alkaline and sulfate electrolytes by plasma electrolytic saturation [Volume 6, Issue 23, 2016, Pages 1-18]
-
Plasticizer
Investigation of Role of both Nucleating Agent and Plasticizer on Physical, Mechanical and Thermal Properties of Poly(Lactic Acid) [Volume 6, Issue 21, 2016, Pages 53-60]
-
Polarization
Investigation of Zinc metallic coating properties formed on low carbon steel in alkaline and sulfate electrolytes by plasma electrolytic saturation [Volume 6, Issue 23, 2016, Pages 1-18]
-
Polarization Test
The Effect of Annealing Temperature on The Structure and Corrosion Behavior of Nano-Quasicrystalline Al72Ni13Cr15 alloy Synthesized by Mechanical Alloying [Volume 6, Issue 21, 2016, Pages 161-176]
-
Poly(Lactic Acid)
Investigation of Role of both Nucleating Agent and Plasticizer on Physical, Mechanical and Thermal Properties of Poly(Lactic Acid) [Volume 6, Issue 21, 2016, Pages 53-60]
-
Polymeric Fuel Cell
Production of Porous Carbon Nanoparticles by Usingzinc Layered Gallate Nanohybrid Precursors and Investigate Its Aapplications as Polymeric Fuel Cell Cathode Catalyst [Volume 6, Issue 22, 2016, Pages 111-126]
-
Polypropylene
The effect of calcium carbonate particles on the wear behavior of nano-composite gear PA6/PP/Nano CaCO3 [Volume 6, Issue 24, 2016, Pages 95-106]
-
Properties
Investigation of Role of both Nucleating Agent and Plasticizer on Physical, Mechanical and Thermal Properties of Poly(Lactic Acid) [Volume 6, Issue 21, 2016, Pages 53-60]
-
PTFE
Electroless Deposition of Ni-P/nanoPTFE Composite Coating and Investigation of Its Properties [Volume 6, Issue 21, 2016, Pages 61-72]
Q
-
Quasi-Static Perforation
Investigation and Simulation of Quasi-Static Perforation Test on Sandwich Panels with Al A356/SiCp Composite Foam Core [Volume 6, Issue 22, 2016, Pages 13-28]
-
Quenching
Investigation on the Effects of Using Salt Water Bathroom Quenching on the Corrosion Behavior of Hadfield Manganese Steel [Volume 6, Issue 24, 2016, Pages 29-38]
R
-
Random Distribution
Statistical Micromechanical Analysis of the Effects of Fiber Random Distribution on the Mechanical Properties of Fibrous Composites [Volume 6, Issue 21, 2016, Pages 137-160]
-
Resistance to Wear
Microstructure, Hardness and Wear Resistance of the Hard Layer Containing Silicon Carbide Particles on ASTM A106 Steel Produced by GTAW Welding [Volume 6, Issue 21, 2016, Pages 121-136]
-
Roughness
Electroless Deposition of Ni-P/nanoPTFE Composite Coating and Investigation of Its Properties [Volume 6, Issue 21, 2016, Pages 61-72]
S
-
Sandwich Panel
Investigation and Simulation of Quasi-Static Perforation Test on Sandwich Panels with Al A356/SiCp Composite Foam Core [Volume 6, Issue 22, 2016, Pages 13-28]
-
Scanning Tunneling Microscope
The Effect of Annealing Temperature on The Structure and Corrosion Behavior of Nano-Quasicrystalline Al72Ni13Cr15 alloy Synthesized by Mechanical Alloying [Volume 6, Issue 21, 2016, Pages 161-176]
-
Self-assembled inhibitor, Imidazole, Hybrid Coatings, Carbon steel،
The performance of self-assembled thin film of imidazole used in organic-inorganic hybrid coating on corrosion inhibition of carbon steel in acidic solution [Volume 6, Issue 23, 2016, Pages 61-74]
-
Severe plastic deformation
Microstructure and Mechanical Properties of Plain Low Carbon Steel Processed by Integrated Extrusion and Equal Channel Angular Pressing (Ex-ECAP) [Volume 6, Issue 22, 2016, Pages 55-64]
-
Severe plastic deformation
The effect of severe plastic deformation on the natural ageing behavior of aluminum alloy 2024 [Volume 6, Issue 23, 2016, Pages 39-46]
-
Shear stress
The Effect of Fiber Breakage Caused by Transient Shear Stress Distribution in Single-Lap Adhesive Joint Composite Material [Volume 6, Issue 21, 2016, Pages 1-18]
-
Si/Al Effect
Effect of Si/Al Ratio on Physicochemical Properties of Nanostructured LaAPSO-34 for Conversion of Methanol to Light Olefins [Volume 6, Issue 22, 2016, Pages 91-110]
-
Silver Nanoparticles
Investigation of Antibacterial Properties of Silver Nanoparticles and Polyethylene-Silver Nanocomposites [Volume 6, Issue 22, 2016, Pages 159-168]
-
Sintering
An Studying on the Synthesis and Densification Behavior of β''- Alumina Electrolyte for Sodium-Sulfur Batteries [Volume 6, Issue 22, 2016, Pages 137-146]
-
Sintering temperature
The Effect of Milling Time and Sintering Temperature on the Microstructure and Mechanical Properties of Al/20% SiC Composite Prepared by Powder Metallurgy [Volume 6, Issue 22, 2016, Pages 147-158]
-
SMAW butt Welded Joints
Effect of Ultrasonic Impact Treatment on Fatigue Behavior of Steel Welded Pipes in Petrochemical Corrosive Environment [Volume 6, Issue 21, 2016, Pages 83-96]
-
Sodium Hexametaphosphate
The Effect of Sodium Hexametaphosphate on the Physical and Mechanical Properties of Monolithic Refractories Prepared from the Wastes of Magnesia - Carbon Bricks [Volume 6, Issue 22, 2016, Pages 45-54]
-
Spent Brick
The Effect of Sodium Hexametaphosphate on the Physical and Mechanical Properties of Monolithic Refractories Prepared from the Wastes of Magnesia - Carbon Bricks [Volume 6, Issue 22, 2016, Pages 45-54]
-
Stainless Steel Implant
Improvement in Mechanical Properties of Medical Stainless Steels by Using Liquid-Phase Sintering [Volume 6, Issue 21, 2016, Pages 73-82]
-
Steel AISI 422
Study of Phase Transformation in Martensitic Stainless Steel AISI 422 During Continuous Cooling [Volume 6, Issue 22, 2016, Pages 79-90]
-
Steel/Silicon Carbide Composite
Microstructure, Hardness and Wear Resistance of the Hard Layer Containing Silicon Carbide Particles on ASTM A106 Steel Produced by GTAW Welding [Volume 6, Issue 21, 2016, Pages 121-136]
-
Supersolidus sintering
Gravitational Effects on Compact Shaping and Microstructure during Supersolidus Liquid Phase Sintering of Cu-10Sn-10Pb [Volume 6, Issue 23, 2016, Pages 127-138]
-
Surface Hybrid Composite
Investigation of microstructure and hardness of surface composite AA5086(H116)/ZrO2 and surface hybrid composite AA5086(H116)/ZrO2/Gr fabricated by friction stir processing [Volume 6, Issue 23, 2016, Pages 101-114]
-
Synthesize
An Studying on the Synthesis and Densification Behavior of β''- Alumina Electrolyte for Sodium-Sulfur Batteries [Volume 6, Issue 22, 2016, Pages 137-146]
T
-
Thermal Analysis
Effect of Cooling Rate and Grain Refining Agents on Microstructure Characteristics of Al-Cu Alloys by Computer- Aided Cooling Curve Method [Volume 6, Issue 23, 2016, Pages 75-88]
-
Thermal cycle
Fracture Resistance Improvement of Micro Alloy Steel Weld in Four Wire Submerged Arc Welding by applying One and Two Thermal Cycles [Volume 6, Issue 23, 2016, Pages 115-126]
-
Thermite Reaction
Effects of Alumina Particles and Carbon Monoxide Gas Bubbles Within the Melt on the Graphite Morphology and Microstructure of Gray Cast Iron [Volume 6, Issue 22, 2016, Pages 1-12]
-
TiO2 Plasma Electrolytic Oxidation
Enhancement of Local Corrosion Resistance of CP-Titanium in H2SO4 Solution via Plasma Electrolytic Oxidation [Volume 6, Issue 22, 2016, Pages 127-136]
-
Transient Stress
The Effect of Fiber Breakage Caused by Transient Shear Stress Distribution in Single-Lap Adhesive Joint Composite Material [Volume 6, Issue 21, 2016, Pages 1-18]
-
Tribological behavior
Investigating the Tribological Behavior of Epoxy Matrix Composites Reinforced by Milled Fibers [Volume 6, Issue 24, 2016, Pages 51-62]
U
-
Ultrasonic Impact Treatment
Effect of Ultrasonic Impact Treatment on Fatigue Behavior of Steel Welded Pipes in Petrochemical Corrosive Environment [Volume 6, Issue 21, 2016, Pages 83-96]
V
-
Viscosity
Gravitational Effects on Compact Shaping and Microstructure during Supersolidus Liquid Phase Sintering of Cu-10Sn-10Pb [Volume 6, Issue 23, 2016, Pages 127-138]
W
-
Wear
Improvement in Mechanical Properties of Medical Stainless Steels by Using Liquid-Phase Sintering [Volume 6, Issue 21, 2016, Pages 73-82]
-
Wear
Investigating the effect of tungsten and heat treatment on microstructure and wear behavior of Ni-hard 4 cast iron [Volume 6, Issue 24, 2016, Pages 13-28]
-
Wear
The effect of calcium carbonate particles on the wear behavior of nano-composite gear PA6/PP/Nano CaCO3 [Volume 6, Issue 24, 2016, Pages 95-106]
-
Wear Resistance, Al/SiC Composites
The Effect of Milling Time and Sintering Temperature on the Microstructure and Mechanical Properties of Al/20% SiC Composite Prepared by Powder Metallurgy [Volume 6, Issue 22, 2016, Pages 147-158]
-
Welding
A Survey of Mechanism and Kinetic of Oxidation of Welding Lines in Austenitic Stainless Steel AISI321 [Volume 6, Issue 21, 2016, Pages 109-120]
-
Weld Metal Toughness
Determination Optimum Boron Quantity Effect on Low Temperature Impact Energy of Mild Steel Weld Metal that Fabricated by Submerge Arc Welding (SAW) [Volume 6, Issue 21, 2016, Pages 19-36]
X
-
X Ray Diffraction
Microstructure and Mechanical Properties of Plain Low Carbon Steel Processed by Integrated Extrusion and Equal Channel Angular Pressing (Ex-ECAP) [Volume 6, Issue 22, 2016, Pages 55-64]
Z
-
Zeta Process
An Studying on the Synthesis and Densification Behavior of β''- Alumina Electrolyte for Sodium-Sulfur Batteries [Volume 6, Issue 22, 2016, Pages 137-146]
-
Zinc Metal Coating
Investigation of Zinc metallic coating properties formed on low carbon steel in alkaline and sulfate electrolytes by plasma electrolytic saturation [Volume 6, Issue 23, 2016, Pages 1-18]
-
Zirconium
Effect of Aluminum Content in Pack Cementation Mixture on Microstructure and Cyclic Oxidation Performance of Zr-modified Aluminide Coatings [Volume 6, Issue 23, 2016, Pages 19-30]
-
Zirconium Diboride
Synthesis of Zirconium Diboride Via Carbothermal, Borothermal, and Borocarbothermal Activation Methods [Volume 6, Issue 22, 2016, Pages 169-180]
Your query does not match with any item