Author Index

A

  • Abbasi, M. Synthesis and Study of Properties of Bioactive Glass (45S)/TiO2/Fluorapatite Nanocomposite [Volume 8, Issue 32, 2018, Pages 73-96]
  • Abbass, M Production of composite coating of hard chrome – nano alumina by electroplating from the bath of hexa valence chrome and the study of the hardness and abrasive properties [Volume 8, Issue 30, 2018, Pages 45-58]
  • Abdi zadeh, H Investigation on the effects of the amount and source of carbon on synthesis of Ti2AlC nanostructure by self-propagating high temperature combustion synthesis method [Volume 8, Issue 29, 2018, Pages 57-68]
  • Abolpour, A Evaluation of anti-corrosion properties of MIO pigments in the formulation of synthetic rubber based primer used in gas pipeline [Volume 8, Issue 29, 2018, Pages 109-120]
  • Afsharnaderi, A. Effect of Sr on Microstructure and Mechanical Properties of AZ91 Magnesium Alloy [Volume 8, Issue 32, 2018, Pages 31-42]
  • Ahmadi, A.R. Comparison of microstructures and mechanical properties of Al 7075 alloy obtained from conventional modified SIMA processes [Volume 8, Issue 32, 2018, Pages 149-158]
  • Ahmadi, R. Synthesis of copper-tin metal oxide nanoparticles by the electrical explosion wire method and investigation antibacterial properties [Volume 8, Issue 32, 2018, Pages 125-136]
  • Ajdari, S. Modification of the surface morphology of atmospheric plasma sprayed tungsten coating for X-ray tube application [Volume 8, Issue 32, 2018, Pages 137-146]
  • Akbarzadeh, N Synthesis and Characterization of Nanoparticles of Magnesium-Copper Oxide with Paramagnetic Properties [Volume 8, Issue 30, 2018, Pages 163-172]
  • Alizadeh, M Effect of Strain Rate on the Hot Tensile Behavior of Invar Alloy Failure analysis of clogging caused by corrosion of copper pipes containing chloride gas in the presence of moisture (case study) [Volume 8, Issue 31, 2018, Pages 29-40]
  • Alizadeh, M. Comparison of microstructures and mechanical properties of Al 7075 alloy obtained from conventional modified SIMA processes [Volume 8, Issue 32, 2018, Pages 149-158]
  • Amini, M The effect of B4C particle contents on hardness and wear resistance of Al-SiC-B4C composite formatted on AA332 via GTAW process [Volume 8, Issue 31, 2018, Pages 123-140]
  • Anvari, S.Z The effect of titanium interlayer on the mechanical and structural properties of steel- tungsten diffusion bonding [Volume 8, Issue 30, 2018, Pages 105-116]
  • Arab, A An investigation of vanadium concentration on the optical and electrical properties of TiO2 sol-gel derived thin films [Volume 8, Issue 30, 2018, Pages 173-182]
  • Asgharinezhad, M An investigation of vanadium concentration on the optical and electrical properties of TiO2 sol-gel derived thin films [Volume 8, Issue 30, 2018, Pages 173-182]
  • Asrari, A.H Synthesis of Microspheres Cr2O3/C by Changing the Synthesis’ Parameters and Evaluation of Electrochemical Properties of Microspheres [Volume 8, Issue 30, 2018, Pages 59-72]
  • Atazadeh, N Investigation on the effect of Al addition on synthesis of Ti3SiC2 nanostructure by Mechanical alloying – heat treatment method [Volume 8, Issue 30, 2018, Pages 15-28]
  • Azarafza, R Effect of Heat Treatment and Hot Working on Vibrational and Mechanical Properties of Magnesium Alloy AZ91 [Volume 8, Issue 31, 2018, Pages 79-92]

B

  • Badiee, H The effect of nano-alumina addition on the properties of high-alumina low-cement self-flowing refractory castables [Volume 8, Issue 29, 2018, Pages 29-42]
  • Bahadori yekta, E Effect of milling time and investigation of thermodynamic analysis on amorphous phase formation in Fe-C-Ta alloy prepared by mechanical alloying [Volume 8, Issue 31, 2018, Pages 107-122]
  • Baharvandi, H Investigation on the effects of the amount and source of carbon on synthesis of Ti2AlC nanostructure by self-propagating high temperature combustion synthesis method [Volume 8, Issue 29, 2018, Pages 57-68]
  • Baharvandi, H.R Investigation on the effect of Al addition on synthesis of Ti3SiC2 nanostructure by Mechanical alloying – heat treatment method [Volume 8, Issue 30, 2018, Pages 15-28]
  • Balak, Z An investigation on the effects of interpass temperature on corrosion behavior of weld metal of Hadfield high carbon steel weld joint [Volume 8, Issue 29, 2018, Pages 147-160]
  • Balak, Z. Investigation the effect of In-doping on the structural and optical properties of electrodeposited SnS thin film [Volume 8, Issue 32, 2018, Pages 43-56]
  • Bavarsiha, F Synthesis of Fe3O4/SiO2/TiO2-Ag Core Shell Nanocomposites and Investigation of its Magnetic Properties [Volume 8, Issue 31, 2018, Pages 51-60]
  • Behtari Poor, E Influence of Process Parameters on Hot Backward Extrusion of Al 6061 alloy [Volume 8, Issue 30, 2018, Pages 153-162]
  • Bordbar, S Effect of Strain Rate on the Hot Tensile Behavior of Invar Alloy Failure analysis of clogging caused by corrosion of copper pipes containing chloride gas in the presence of moisture (case study) [Volume 8, Issue 31, 2018, Pages 29-40]
  • Boutorabi, S. M. Effect of Ablation Casting on Microstructure of a Magnesium Alloy [Volume 8, Issue 32, 2018, Pages 159-168]

D

  • Dadashian, S Synthesis of Fe3O4/SiO2/TiO2-Ag Core Shell Nanocomposites and Investigation of its Magnetic Properties [Volume 8, Issue 31, 2018, Pages 51-60]
  • Dadashian, Saeideh Fabrication of Fe3O4/SiO2/ZnO photocatalytic composite with core/shell/shell Nanostructure and characterized its [Volume 8, Issue 32, 2018, Pages 1-12]
  • Dadoo, A The Effect of Pulsed Laser Parameters on Surface Compositing of H13-TiC [Volume 8, Issue 31, 2018, Pages 61-78]
  • Danaee, I Evaluation of anti-corrosion properties of MIO pigments in the formulation of synthetic rubber based primer used in gas pipeline [Volume 8, Issue 29, 2018, Pages 109-120]
  • Daneshmanesh, H The effects of TiO2 nanoparticles on physical and thermal properties of polyurethane foam and sandwich panel [Volume 8, Issue 29, 2018, Pages 91-108]
  • Daneshmanesh, H preparation and evaluation of mechanical and thermal properties of epoxy/silica nanocomposites [Volume 8, Issue 31, 2018, Pages 93-106]
  • Dashti, A Effects of severe plastic deformation on mechanical properties, electrical conductivity and microstructure of Al-7075 alloy [Volume 8, Issue 30, 2018, Pages 73-86]

E

  • Ebrahimi, GH Experimental Study on Creep Behavior of Al2024/SiC Composite Produced via Accumulative Roll Bonding (ARB) Process [Volume 8, Issue 31, 2018, Pages 153-166]
  • Ebrahimi, G.R Effect of the shoulder size and dwell time on the static Strength and fracture mode of projection friction stir spot welded 2024 aluminum alloy [Volume 8, Issue 32, 2018, Pages 13-30]
  • Ebrahimi, R Influence of Process Parameters on Hot Backward Extrusion of Al 6061 alloy [Volume 8, Issue 30, 2018, Pages 153-162]
  • Ebrahimzadeh, F Chemical reduction synthesis of copper nanoparticles in aqueous media in present of maleic acid and polyvinylpyrrolidone (PVP) [Volume 8, Issue 29, 2018, Pages 121-128]
  • Ehsani, N Investigation on the effect of Al addition on synthesis of Ti3SiC2 nanostructure by Mechanical alloying – heat treatment method [Volume 8, Issue 30, 2018, Pages 15-28]
  • Emadi, M Removal Color From Aqueous Solution By Penta Aza Tetra Ethylene Supported On Polyacrylamide As a New Adsorbent Kinetic And Adsorption Isotherm Studies [Volume 8, Issue 29, 2018, Pages 13-28]
  • Emamy, M. Effect of Sr on Microstructure and Mechanical Properties of AZ91 Magnesium Alloy [Volume 8, Issue 32, 2018, Pages 31-42]
  • Eqra, R Synthesis of nano divalent silver oxide for using in primary zinc-silver oxide battery [Volume 8, Issue 29, 2018, Pages 43-56]
  • Eqra, R preparation and evaluation of mechanical and thermal properties of epoxy/silica nanocomposites [Volume 8, Issue 31, 2018, Pages 93-106]
  • Erfaghi, H Evaluation of anti-corrosion properties of MIO pigments in the formulation of synthetic rubber based primer used in gas pipeline [Volume 8, Issue 29, 2018, Pages 109-120]
  • Esfandyar, H Studying mechanical behavior of non-wrinkled phosphorene nanotubes under uniaxial loading [Volume 8, Issue 30, 2018, Pages 117-124]
  • Eshaghi, A An investigation of vanadium concentration on the optical and electrical properties of TiO2 sol-gel derived thin films [Volume 8, Issue 30, 2018, Pages 173-182]
  • Ezatpour, H.R. Effect of the shoulder size and dwell time on the static Strength and fracture mode of projection friction stir spot welded 2024 aluminum alloy [Volume 8, Issue 32, 2018, Pages 13-30]

F

  • Fadavi, A Removal Color From Aqueous Solution By Penta Aza Tetra Ethylene Supported On Polyacrylamide As a New Adsorbent Kinetic And Adsorption Isotherm Studies [Volume 8, Issue 29, 2018, Pages 13-28]
  • Falahati aghda, S Study of PEO on the fatigue behavior of titanium alloy Ti-6Al-4V [Volume 8, Issue 31, 2018, Pages 141-152]
  • Farahbakhsh, I Study of Mechanical and Thermal Properties of NBR/PP-Nano Clay Composite [Volume 8, Issue 31, 2018, Pages 17-28]
  • Farahbakhsh, I. Synthesis and Study of Properties of Bioactive Glass (45S)/TiO2/Fluorapatite Nanocomposite [Volume 8, Issue 32, 2018, Pages 73-96]
  • Faraji, R. Fabrication and investigation of the properties of a water-based acrylic nanocomposite [Volume 8, Issue 32, 2018, Pages 97-108]
  • Farzam, M Evaluation of anti-corrosion properties of MIO pigments in the formulation of synthetic rubber based primer used in gas pipeline [Volume 8, Issue 29, 2018, Pages 109-120]
  • Forough, A.R Influence of filler metal on the microstructure of dissimilar welds between UNS S32205 duplex stainless steel and ASTM A517 Quench and tempered steel [Volume 8, Issue 30, 2018, Pages 125-138]

G

  • Ghasemalinezhad Shirazifard, N. Investigation of crystallization kinetics of Co-Fe-Ta-Hf-B melt-spun glassy ribbon with a high thermal stability under isochronal condition [Volume 8, Issue 32, 2018, Pages 169-182]
  • Ghasemi piranloo, F Synthesis of Fe3O4/SiO2/TiO2-Ag Core Shell Nanocomposites and Investigation of its Magnetic Properties [Volume 8, Issue 31, 2018, Pages 51-60]
  • Ghasemy Piranloo, Fardin Fabrication of Fe3O4/SiO2/ZnO photocatalytic composite with core/shell/shell Nanostructure and characterized its [Volume 8, Issue 32, 2018, Pages 1-12]
  • Ghasvari, M. Effect of Ablation Casting on Microstructure of a Magnesium Alloy [Volume 8, Issue 32, 2018, Pages 159-168]
  • Gheisari, Kh Dielectric Properties of Multiferroic Composite Consisting Lithium Ferrite and Bismuth Titanate Synthesized by Combustion Method [Volume 8, Issue 30, 2018, Pages 139-152]
  • Gholampour, M Investigation of structure and tribological behavior of nanostructured DLC coating, deposited by PACVD and Arc-PVD processes [Volume 8, Issue 30, 2018, Pages 87-104]

H

  • Hadianfard, M. J. Fabrication and investigation of the properties of a water-based acrylic nanocomposite [Volume 8, Issue 32, 2018, Pages 97-108]
  • Hajisafari, M Investigation Corrosion Fatigue Behaviours of 7075-T6 Aluminum Alloy in Sea Waterr [Volume 8, Issue 29, 2018, Pages 1-12]
  • Hajisafi, M Study of PEO on the fatigue behavior of titanium alloy Ti-6Al-4V [Volume 8, Issue 31, 2018, Pages 141-152]
  • Hosseini, R. Synthesis of copper-tin metal oxide nanoparticles by the electrical explosion wire method and investigation antibacterial properties [Volume 8, Issue 32, 2018, Pages 125-136]

I

  • Iranmaneh, M Effect of Strain Rate on the Hot Tensile Behavior of Invar Alloy Failure analysis of clogging caused by corrosion of copper pipes containing chloride gas in the presence of moisture (case study) [Volume 8, Issue 31, 2018, Pages 29-40]
  • Iranpour, M Removal Color From Aqueous Solution By Penta Aza Tetra Ethylene Supported On Polyacrylamide As a New Adsorbent Kinetic And Adsorption Isotherm Studies [Volume 8, Issue 29, 2018, Pages 13-28]

J

  • Jafarirad, S Biosynthesis of silver nanopowders and evaluation on their application in cosmetic products [Volume 8, Issue 29, 2018, Pages 69-80]
  • Jamshidi, B The effect of nano-alumina addition on the properties of high-alumina low-cement self-flowing refractory castables [Volume 8, Issue 29, 2018, Pages 29-42]
  • Jamshidi, M Production of composite coating of hard chrome – nano alumina by electroplating from the bath of hexa valence chrome and the study of the hardness and abrasive properties [Volume 8, Issue 30, 2018, Pages 45-58]

K

  • Kafashan, H. Investigation the effect of In-doping on the structural and optical properties of electrodeposited SnS thin film [Volume 8, Issue 32, 2018, Pages 43-56]
  • Karamouz, M. Comparison of microstructures and mechanical properties of Al 7075 alloy obtained from conventional modified SIMA processes [Volume 8, Issue 32, 2018, Pages 149-158]
  • Karanian, I Investigation of structure and tribological behavior of nanostructured DLC coating, deposited by PACVD and Arc-PVD processes [Volume 8, Issue 30, 2018, Pages 87-104]
  • Karbakhsh ravari, B The effect of B4C particle contents on hardness and wear resistance of Al-SiC-B4C composite formatted on AA332 via GTAW process [Volume 8, Issue 31, 2018, Pages 123-140]
  • Karimi, A Investigation on the effects of the amount and source of carbon on synthesis of Ti2AlC nanostructure by self-propagating high temperature combustion synthesis method [Volume 8, Issue 29, 2018, Pages 57-68]
  • Kasiri, M Influence of filler metal on the microstructure of dissimilar welds between UNS S32205 duplex stainless steel and ASTM A517 Quench and tempered steel [Volume 8, Issue 30, 2018, Pages 125-138]
  • Kazemi, M The Effect of Pulsed Laser Parameters on Surface Compositing of H13-TiC [Volume 8, Issue 31, 2018, Pages 61-78]
  • Khanzadeh Gharah shiran, M.R Investigating on effect of heat treatment on microstructure and metallurgical properties of three layers explosively bonded Cu/Al/Cu plates [Volume 8, Issue 30, 2018, Pages 29-44]
  • Kheirandish, Sh The Effect of Pulsed Laser Parameters on Surface Compositing of H13-TiC [Volume 8, Issue 31, 2018, Pages 61-78]
  • Khezri, A Investigation Corrosion Fatigue Behaviours of 7075-T6 Aluminum Alloy in Sea Waterr [Volume 8, Issue 29, 2018, Pages 1-12]
  • Khodabandehloo, N Study of Microstructure and Mechanical properties of Welded mild steel fabricated by FCAW and Compare with GMAW Process [Volume 8, Issue 30, 2018, Pages 1-14]
  • Khodaei, L Biosynthesis of silver nanopowders and evaluation on their application in cosmetic products [Volume 8, Issue 29, 2018, Pages 69-80]
  • Khodaei, M The effect of titanium interlayer on the mechanical and structural properties of steel- tungsten diffusion bonding [Volume 8, Issue 30, 2018, Pages 105-116]
  • Kianezhad, M Hardness Prediction in the Ni-Based Superalloy GTD-111 Using Quench Factor Analysis (QFA) [Volume 8, Issue 31, 2018, Pages 41-50]
  • Koozegar Kaleji, B. Synthesis and Investigation of Optical and Photocatalytic properties of ZnO nanoparticles co-doped with Ti/Si [Volume 8, Issue 32, 2018, Pages 71-82]

L

  • Limooei, Mohammadbagher Production of Open Cell Copper Foam and assessment of foam Substructure [Volume 8, Issue 31, 2018, Pages 179-191]
  • Loghavi, M. M Synthesis of nano divalent silver oxide for using in primary zinc-silver oxide battery [Volume 8, Issue 29, 2018, Pages 43-56]

M

  • Mahmoudi, R Biosynthesis of silver nanopowders and evaluation on their application in cosmetic products [Volume 8, Issue 29, 2018, Pages 69-80]
  • Mahmoudzehi, M Synthesis and Characterization of Nanoparticles of Magnesium-Copper Oxide with Paramagnetic Properties [Volume 8, Issue 30, 2018, Pages 163-172]
  • Malekan, M. Effect of Sr on Microstructure and Mechanical Properties of AZ91 Magnesium Alloy [Volume 8, Issue 32, 2018, Pages 31-42]
  • Manafi, S The effect of nano-alumina addition on the properties of high-alumina low-cement self-flowing refractory castables [Volume 8, Issue 29, 2018, Pages 29-42]
  • Manafi, S.A Study of Mechanical and Thermal Properties of NBR/PP-Nano Clay Composite [Volume 8, Issue 31, 2018, Pages 17-28]
  • Mashreghi, A Investigating the effect of particle size on Volume-per-atom parameter of TiO2 nanoparticles [Volume 8, Issue 29, 2018, Pages 81-90]
  • Mirbagheri, S.M.H Production of Open Cell Copper Foam and assessment of foam Substructure [Volume 8, Issue 31, 2018, Pages 1-16]
  • Mirghorbani, S.M Production of composite coating of hard chrome – nano alumina by electroplating from the bath of hexa valence chrome and the study of the hardness and abrasive properties [Volume 8, Issue 30, 2018, Pages 45-58]
  • Mohamadrezaii, M Dielectric Properties of Multiferroic Composite Consisting Lithium Ferrite and Bismuth Titanate Synthesized by Combustion Method [Volume 8, Issue 30, 2018, Pages 139-152]
  • Mohammadi, J Biosynthesis of silver nanopowders and evaluation on their application in cosmetic products [Volume 8, Issue 29, 2018, Pages 69-80]
  • Mohammadian Semnani, H.R Experimental Study on Creep Behavior of Al2024/SiC Composite Produced via Accumulative Roll Bonding (ARB) Process [Volume 8, Issue 31, 2018, Pages 153-166]
  • Mohammadpour, M Flow behavior and microstructural investigation of GTD 111 cast nickel base superalloy during hot pressure test [Volume 8, Issue 31, 2018, Pages 167-178]
  • Momeni, A Flow behavior and microstructural investigation of GTD 111 cast nickel base superalloy during hot pressure test [Volume 8, Issue 31, 2018, Pages 167-178]
  • Montajabiha, M.R Effect of Heat Treatment and Hot Working on Vibrational and Mechanical Properties of Magnesium Alloy AZ91 [Volume 8, Issue 31, 2018, Pages 79-92]
  • Moshksar, M.M Influence of Process Parameters on Hot Backward Extrusion of Al 6061 alloy [Volume 8, Issue 30, 2018, Pages 153-162]
  • Moshrefifar, M Achieving optimal conditions for manufacturing of A356 aluminum alloy/ BN(h) composite using stir casting [Volume 8, Issue 29, 2018, Pages 129-146]
  • Mousae, M. Synthesis and Investigation of Optical and Photocatalytic properties of ZnO nanoparticles co-doped with Ti/Si [Volume 8, Issue 32, 2018, Pages 71-82]

N

  • Nayebi, B Study of Mechanical and Thermal Properties of NBR/PP-Nano Clay Composite [Volume 8, Issue 31, 2018, Pages 17-28]
  • Nayebzade, R Investigation of structure and tribological behavior of nanostructured DLC coating, deposited by PACVD and Arc-PVD processes [Volume 8, Issue 30, 2018, Pages 87-104]

P

  • Parsazar, A Biosynthesis of silver nanopowders and evaluation on their application in cosmetic products [Volume 8, Issue 29, 2018, Pages 69-80]

R

  • Ranjbar, K. In-situ fabrication of titanium metal powder incorporated AA3003 /Al3Ti alloy composite by friction stir processing [Volume 8, Issue 32, 2018, Pages 57-70]
  • Rasizadeh, J. Effect of Sr on Microstructure and Mechanical Properties of AZ91 Magnesium Alloy [Volume 8, Issue 32, 2018, Pages 31-42]
  • Rezaei, A.H Effect of Heat Treatment and Hot Working on Vibrational and Mechanical Properties of Magnesium Alloy AZ91 [Volume 8, Issue 31, 2018, Pages 79-92]

S

  • Saadat, A Investigating on effect of heat treatment on microstructure and metallurgical properties of three layers explosively bonded Cu/Al/Cu plates [Volume 8, Issue 30, 2018, Pages 29-44]
  • Sabet, H Study of Microstructure and Mechanical properties of Welded mild steel fabricated by FCAW and Compare with GMAW Process [Volume 8, Issue 30, 2018, Pages 1-14]
  • Sabet, H The effect of B4C particle contents on hardness and wear resistance of Al-SiC-B4C composite formatted on AA332 via GTAW process [Volume 8, Issue 31, 2018, Pages 123-140]
  • Sabzi, M An investigation on the effects of interpass temperature on corrosion behavior of weld metal of Hadfield high carbon steel weld joint [Volume 8, Issue 29, 2018, Pages 147-160]
  • Saeedi Heydari, M Investigation on the effect of Al addition on synthesis of Ti3SiC2 nanostructure by Mechanical alloying – heat treatment method [Volume 8, Issue 30, 2018, Pages 15-28]
  • Safarzadeh, H Synthesis of Microspheres Cr2O3/C by Changing the Synthesis’ Parameters and Evaluation of Electrochemical Properties of Microspheres [Volume 8, Issue 30, 2018, Pages 59-72]
  • Safavi, M preparation and evaluation of mechanical and thermal properties of epoxy/silica nanocomposites [Volume 8, Issue 31, 2018, Pages 93-106]
  • Saghafiyan, H The Effect of Pulsed Laser Parameters on Surface Compositing of H13-TiC [Volume 8, Issue 31, 2018, Pages 61-78]
  • Sahedi Asl, M Study of Mechanical and Thermal Properties of NBR/PP-Nano Clay Composite [Volume 8, Issue 31, 2018, Pages 17-28]
  • Sajjadi, S.A Hardness Prediction in the Ni-Based Superalloy GTD-111 Using Quench Factor Analysis (QFA) [Volume 8, Issue 31, 2018, Pages 41-50]
  • Samadi, F The effect of titanium interlayer on the mechanical and structural properties of steel- tungsten diffusion bonding [Volume 8, Issue 30, 2018, Pages 105-116]
  • Setoodeh, A.R Studying mechanical behavior of non-wrinkled phosphorene nanotubes under uniaxial loading [Volume 8, Issue 30, 2018, Pages 117-124]
  • Shaeri, M.H Effects of severe plastic deformation on mechanical properties, electrical conductivity and microstructure of Al-7075 alloy [Volume 8, Issue 30, 2018, Pages 73-86]
  • Shahraki, M Synthesis and Characterization of Nanoparticles of Magnesium-Copper Oxide with Paramagnetic Properties [Volume 8, Issue 30, 2018, Pages 163-172]
  • Shahriari Nogorani, F. Modification of the surface morphology of atmospheric plasma sprayed tungsten coating for X-ray tube application [Volume 8, Issue 32, 2018, Pages 137-146]
  • Shahsavan, M Production of Open Cell Copper Foam and assessment of foam Substructure [Volume 8, Issue 31, 2018, Pages 1-16]
  • Shamanian, M Influence of filler metal on the microstructure of dissimilar welds between UNS S32205 duplex stainless steel and ASTM A517 Quench and tempered steel [Volume 8, Issue 30, 2018, Pages 125-138]
  • Sharafi, Sshahriyar Effect of milling time and investigation of thermodynamic analysis on amorphous phase formation in Fe-C-Ta alloy prepared by mechanical alloying [Volume 8, Issue 31, 2018, Pages 107-122]
  • Shayegh Boroujeny, B Synthesis of Microspheres Cr2O3/C by Changing the Synthesis’ Parameters and Evaluation of Electrochemical Properties of Microspheres [Volume 8, Issue 30, 2018, Pages 59-72]
  • Soheili Moghaddam, A Experimental Study on Creep Behavior of Al2024/SiC Composite Produced via Accumulative Roll Bonding (ARB) Process [Volume 8, Issue 31, 2018, Pages 153-166]
  • Soltani Dehnavi, A Investigating on effect of heat treatment on microstructure and metallurgical properties of three layers explosively bonded Cu/Al/Cu plates [Volume 8, Issue 30, 2018, Pages 29-44]

T

  • Taghiabadi, R Effects of severe plastic deformation on mechanical properties, electrical conductivity and microstructure of Al-7075 alloy [Volume 8, Issue 30, 2018, Pages 73-86]
  • Taghvaei, A. H. Investigation of crystallization kinetics of Co-Fe-Ta-Hf-B melt-spun glassy ribbon with a high thermal stability under isochronal condition [Volume 8, Issue 32, 2018, Pages 169-182]
  • Taghvaei, A.H Effect of milling time and investigation of thermodynamic analysis on amorphous phase formation in Fe-C-Ta alloy prepared by mechanical alloying [Volume 8, Issue 31, 2018, Pages 107-122]

Y

  • Yarali, D. Synthesis of copper-tin metal oxide nanoparticles by the electrical explosion wire method and investigation antibacterial properties [Volume 8, Issue 32, 2018, Pages 125-136]

Z

  • Zaarei, D Evaluation of anti-corrosion properties of MIO pigments in the formulation of synthetic rubber based primer used in gas pipeline [Volume 8, Issue 29, 2018, Pages 109-120]
  • Zadali, M. In-situ fabrication of titanium metal powder incorporated AA3003 /Al3Ti alloy composite by friction stir processing [Volume 8, Issue 32, 2018, Pages 57-70]
  • Zandrahimi, Morteza Production of Open Cell Copper Foam and assessment of foam Substructure [Volume 8, Issue 31, 2018, Pages 179-191]
  • Zare, M.A Removal Color From Aqueous Solution By Penta Aza Tetra Ethylene Supported On Polyacrylamide As a New Adsorbent Kinetic And Adsorption Isotherm Studies [Volume 8, Issue 29, 2018, Pages 13-28]
  • Zebarjad, S.M The effects of TiO2 nanoparticles on physical and thermal properties of polyurethane foam and sandwich panel [Volume 8, Issue 29, 2018, Pages 91-108]