Keyword Index

A

  • A356 Al alloy Achieving optimal conditions for manufacturing of A356 aluminum alloy/ BN(h) composite using stir casting [Volume 8, Issue 29, 2018, Pages 129-146]
  • AA3003-H14 alloy In-situ fabrication of titanium metal powder incorporated AA3003 /Al3Ti alloy composite by friction stir processing [Volume 8, Issue 32, 2018, Pages 57-70]
  • Ablation casting Effect of Ablation Casting on Microstructure of a Magnesium Alloy [Volume 8, Issue 32, 2018, Pages 159-168]
  • AC conductivity Dielectric Properties of Multiferroic Composite Consisting Lithium Ferrite and Bismuth Titanate Synthesized by Combustion Method [Volume 8, Issue 30, 2018, Pages 139-152]
  • Activation energy Flow behavior and microstructural investigation of GTD 111 cast nickel base superalloy during hot pressure test [Volume 8, Issue 31, 2018, Pages 167-178]
  • Adhesion Evaluation of anti-corrosion properties of MIO pigments in the formulation of synthetic rubber based primer used in gas pipeline [Volume 8, Issue 29, 2018, Pages 109-120]
  • Adsorbent Removal Color From Aqueous Solution By Penta Aza Tetra Ethylene Supported On Polyacrylamide As a New Adsorbent Kinetic And Adsorption Isotherm Studies [Volume 8, Issue 29, 2018, Pages 13-28]
  • Ag nanoparticles Biosynthesis of silver nanopowders and evaluation on their application in cosmetic products [Volume 8, Issue 29, 2018, Pages 69-80]
  • Ag particle Synthesis of Fe3O4/SiO2/TiO2-Ag Core Shell Nanocomposites and Investigation of its Magnetic Properties [Volume 8, Issue 31, 2018, Pages 51-60]
  • Al3Ti aluminide In-situ fabrication of titanium metal powder incorporated AA3003 /Al3Ti alloy composite by friction stir processing [Volume 8, Issue 32, 2018, Pages 57-70]
  • Al 6061 alloy Influence of Process Parameters on Hot Backward Extrusion of Al 6061 alloy [Volume 8, Issue 30, 2018, Pages 153-162]
  • Al 7075 alloy Comparison of microstructures and mechanical properties of Al 7075 alloy obtained from conventional modified SIMA processes [Volume 8, Issue 32, 2018, Pages 149-158]
  • Al-7075 alloy Effects of severe plastic deformation on mechanical properties, electrical conductivity and microstructure of Al-7075 alloy [Volume 8, Issue 30, 2018, Pages 73-86]
  • Aluminium Experimental Study on Creep Behavior of Al2024/SiC Composite Produced via Accumulative Roll Bonding (ARB) Process [Volume 8, Issue 31, 2018, Pages 153-166]
  • Annealing in hydrogen atmosphere Modification of the surface morphology of atmospheric plasma sprayed tungsten coating for X-ray tube application [Volume 8, Issue 32, 2018, Pages 137-146]
  • Antibacterial Synthesis of copper-tin metal oxide nanoparticles by the electrical explosion wire method and investigation antibacterial properties [Volume 8, Issue 32, 2018, Pages 125-136]
  • APS-Wcoating Modification of the surface morphology of atmospheric plasma sprayed tungsten coating for X-ray tube application [Volume 8, Issue 32, 2018, Pages 137-146]
  • Arc-PVD Investigation of structure and tribological behavior of nanostructured DLC coating, deposited by PACVD and Arc-PVD processes [Volume 8, Issue 30, 2018, Pages 87-104]
  • Atmospheric Plasma Spraying (APS) Modification of the surface morphology of atmospheric plasma sprayed tungsten coating for X-ray tube application [Volume 8, Issue 32, 2018, Pages 137-146]
  • Autocatalytic behavior Investigation of crystallization kinetics of Co-Fe-Ta-Hf-B melt-spun glassy ribbon with a high thermal stability under isochronal condition [Volume 8, Issue 32, 2018, Pages 169-182]
  • AZ81 alloy Effect of Ablation Casting on Microstructure of a Magnesium Alloy [Volume 8, Issue 32, 2018, Pages 159-168]
  • AZ91 magnesium alloy Effect of Sr on Microstructure and Mechanical Properties of AZ91 Magnesium Alloy [Volume 8, Issue 32, 2018, Pages 31-42]

B

  • B4C The effect of B4C particle contents on hardness and wear resistance of Al-SiC-B4C composite formatted on AA332 via GTAW process [Volume 8, Issue 31, 2018, Pages 123-140]
  • Backward Extrusion Influence of Process Parameters on Hot Backward Extrusion of Al 6061 alloy [Volume 8, Issue 30, 2018, Pages 153-162]
  • Band gap energy Investigation the effect of In-doping on the structural and optical properties of electrodeposited SnS thin film [Volume 8, Issue 32, 2018, Pages 43-56]
  • Battery Synthesis of nano divalent silver oxide for using in primary zinc-silver oxide battery [Volume 8, Issue 29, 2018, Pages 43-56]
  • Bimetal Sheet The effect of ultrasonic vibrations on mechanical properties of low carbon steel-pure titanium bilayer sheet in incremental sheet forming process [Volume 8, Issue 32, 2018, Pages 109-124]
  • Bioactive glass (45S) Synthesis and Study of Properties of Bioactive Glass (45S)/TiO2/Fluorapatite Nanocomposite [Volume 8, Issue 32, 2018, Pages 73-96]
  • Boron Nitride Achieving optimal conditions for manufacturing of A356 aluminum alloy/ BN(h) composite using stir casting [Volume 8, Issue 29, 2018, Pages 129-146]
  • Bromocroso green Removal Color From Aqueous Solution By Penta Aza Tetra Ethylene Supported On Polyacrylamide As a New Adsorbent Kinetic And Adsorption Isotherm Studies [Volume 8, Issue 29, 2018, Pages 13-28]

C

  • Castable refractory The effect of nano-alumina addition on the properties of high-alumina low-cement self-flowing refractory castables [Volume 8, Issue 29, 2018, Pages 29-42]
  • Characteristic area Production of Open Cell Copper Foam and assessment of foam Substructure [Volume 8, Issue 31, 2018, Pages 1-16]
  • Characteristic area Production of Open Cell Copper Foam and assessment of foam Substructure [Volume 8, Issue 31, 2018, Pages 179-191]
  • Chemical Vapor Deposition (CVD) Modification of the surface morphology of atmospheric plasma sprayed tungsten coating for X-ray tube application [Volume 8, Issue 32, 2018, Pages 137-146]
  • Chlorine Effect of Strain Rate on the Hot Tensile Behavior of Invar Alloy Failure analysis of clogging caused by corrosion of copper pipes containing chloride gas in the presence of moisture (case study) [Volume 8, Issue 31, 2018, Pages 29-40]
  • Cloisite®15A Nano clay Study of Mechanical and Thermal Properties of NBR/PP-Nano Clay Composite [Volume 8, Issue 31, 2018, Pages 17-28]
  • Copper Effect of Strain Rate on the Hot Tensile Behavior of Invar Alloy Failure analysis of clogging caused by corrosion of copper pipes containing chloride gas in the presence of moisture (case study) [Volume 8, Issue 31, 2018, Pages 29-40]
  • Copper – tin oxide Synthesis of copper-tin metal oxide nanoparticles by the electrical explosion wire method and investigation antibacterial properties [Volume 8, Issue 32, 2018, Pages 125-136]
  • Core–shell structure Synthesis of Fe3O4/SiO2/TiO2-Ag Core Shell Nanocomposites and Investigation of its Magnetic Properties [Volume 8, Issue 31, 2018, Pages 51-60]
  • Corrosion Effect of Strain Rate on the Hot Tensile Behavior of Invar Alloy Failure analysis of clogging caused by corrosion of copper pipes containing chloride gas in the presence of moisture (case study) [Volume 8, Issue 31, 2018, Pages 29-40]
  • Cosmetics Biosynthesis of silver nanopowders and evaluation on their application in cosmetic products [Volume 8, Issue 29, 2018, Pages 69-80]
  • Creep Experimental Study on Creep Behavior of Al2024/SiC Composite Produced via Accumulative Roll Bonding (ARB) Process [Volume 8, Issue 31, 2018, Pages 153-166]
  • Crystallization kinetics Investigation of crystallization kinetics of Co-Fe-Ta-Hf-B melt-spun glassy ribbon with a high thermal stability under isochronal condition [Volume 8, Issue 32, 2018, Pages 169-182]

D

  • DEFORM-3D Influence of Process Parameters on Hot Backward Extrusion of Al 6061 alloy [Volume 8, Issue 30, 2018, Pages 153-162]
  • Diffusion bonding The effect of titanium interlayer on the mechanical and structural properties of steel- tungsten diffusion bonding [Volume 8, Issue 30, 2018, Pages 105-116]
  • Dip coating Synthesis and Study of Properties of Bioactive Glass (45S)/TiO2/Fluorapatite Nanocomposite [Volume 8, Issue 32, 2018, Pages 73-96]
  • Duplex stainless steel Influence of filler metal on the microstructure of dissimilar welds between UNS S32205 duplex stainless steel and ASTM A517 Quench and tempered steel [Volume 8, Issue 30, 2018, Pages 125-138]

E

  • ECAP and MDF processes Effects of severe plastic deformation on mechanical properties, electrical conductivity and microstructure of Al-7075 alloy [Volume 8, Issue 30, 2018, Pages 73-86]
  • Effects of Defect Studying mechanical behavior of non-wrinkled phosphorene nanotubes under uniaxial loading [Volume 8, Issue 30, 2018, Pages 117-124]
  • EIS Evaluation of anti-corrosion properties of MIO pigments in the formulation of synthetic rubber based primer used in gas pipeline [Volume 8, Issue 29, 2018, Pages 109-120]
  • Electrical Conductivity Effects of severe plastic deformation on mechanical properties, electrical conductivity and microstructure of Al-7075 alloy [Volume 8, Issue 30, 2018, Pages 73-86]
  • Electrical explosion of wire Synthesis of copper-tin metal oxide nanoparticles by the electrical explosion wire method and investigation antibacterial properties [Volume 8, Issue 32, 2018, Pages 125-136]
  • Electrochemical behavior Synthesis and Characterization of Nanoparticles of Magnesium-Copper Oxide with Paramagnetic Properties [Volume 8, Issue 30, 2018, Pages 163-172]
  • Electrodeposition Investigation the effect of In-doping on the structural and optical properties of electrodeposited SnS thin film [Volume 8, Issue 32, 2018, Pages 43-56]
  • Electroless-plating Production of Open Cell Copper Foam and assessment of foam Substructure [Volume 8, Issue 31, 2018, Pages 1-16]
  • Electroless-plating Production of Open Cell Copper Foam and assessment of foam Substructure [Volume 8, Issue 31, 2018, Pages 179-191]
  • Electroplating Production of composite coating of hard chrome – nano alumina by electroplating from the bath of hexa valence chrome and the study of the hardness and abrasive properties [Volume 8, Issue 30, 2018, Pages 45-58]
  • Electroplating Production of Open Cell Copper Foam and assessment of foam Substructure [Volume 8, Issue 31, 2018, Pages 1-16]
  • Electroplating Production of Open Cell Copper Foam and assessment of foam Substructure [Volume 8, Issue 31, 2018, Pages 179-191]

F

  • Fatigue Investigation Corrosion Fatigue Behaviours of 7075-T6 Aluminum Alloy in Sea Waterr [Volume 8, Issue 29, 2018, Pages 1-12]
  • Fatigue Study of PEO on the fatigue behavior of titanium alloy Ti-6Al-4V [Volume 8, Issue 31, 2018, Pages 141-152]
  • FCAW Study of Microstructure and Mechanical properties of Welded mild steel fabricated by FCAW and Compare with GMAW Process [Volume 8, Issue 30, 2018, Pages 1-14]
  • Fe-base amorphous alloys Effect of milling time and investigation of thermodynamic analysis on amorphous phase formation in Fe-C-Ta alloy prepared by mechanical alloying [Volume 8, Issue 31, 2018, Pages 107-122]
  • Ferrite Circulators Study of Microstructure and Mechanical properties of Welded mild steel fabricated by FCAW and Compare with GMAW Process [Volume 8, Issue 30, 2018, Pages 1-14]
  • Finite element method Influence of Process Parameters on Hot Backward Extrusion of Al 6061 alloy [Volume 8, Issue 30, 2018, Pages 153-162]
  • Fluorapatite Synthesis and Study of Properties of Bioactive Glass (45S)/TiO2/Fluorapatite Nanocomposite [Volume 8, Issue 32, 2018, Pages 73-96]
  • Fracture mode Effect of the shoulder size and dwell time on the static Strength and fracture mode of projection friction stir spot welded 2024 aluminum alloy [Volume 8, Issue 32, 2018, Pages 13-30]
  • Friction stir spot welding Effect of the shoulder size and dwell time on the static Strength and fracture mode of projection friction stir spot welded 2024 aluminum alloy [Volume 8, Issue 32, 2018, Pages 13-30]

G

  • Gas chlorinator Effect of Strain Rate on the Hot Tensile Behavior of Invar Alloy Failure analysis of clogging caused by corrosion of copper pipes containing chloride gas in the presence of moisture (case study) [Volume 8, Issue 31, 2018, Pages 29-40]
  • Gas tungsten arc welding Influence of filler metal on the microstructure of dissimilar welds between UNS S32205 duplex stainless steel and ASTM A517 Quench and tempered steel [Volume 8, Issue 30, 2018, Pages 125-138]
  • GMAW Study of Microstructure and Mechanical properties of Welded mild steel fabricated by FCAW and Compare with GMAW Process [Volume 8, Issue 30, 2018, Pages 1-14]
  • Grain size Effect of Sr on Microstructure and Mechanical Properties of AZ91 Magnesium Alloy [Volume 8, Issue 32, 2018, Pages 31-42]
  • GTAW The effect of B4C particle contents on hardness and wear resistance of Al-SiC-B4C composite formatted on AA332 via GTAW process [Volume 8, Issue 31, 2018, Pages 123-140]
  • GTD-111 Hardness Prediction in the Ni-Based Superalloy GTD-111 Using Quench Factor Analysis (QFA) [Volume 8, Issue 31, 2018, Pages 41-50]
  • GTD-111 Flow behavior and microstructural investigation of GTD 111 cast nickel base superalloy during hot pressure test [Volume 8, Issue 31, 2018, Pages 167-178]

H

  • H13 hot-work tool steel, Nd:YAG laser, RSM The Effect of Pulsed Laser Parameters on Surface Compositing of H13-TiC [Volume 8, Issue 31, 2018, Pages 61-78]
  • Hadfield steel An investigation on the effects of interpass temperature on corrosion behavior of weld metal of Hadfield high carbon steel weld joint [Volume 8, Issue 29, 2018, Pages 147-160]
  • Heat Treatment Investigating on effect of heat treatment on microstructure and metallurgical properties of three layers explosively bonded Cu/Al/Cu plates [Volume 8, Issue 30, 2018, Pages 29-44]
  • Heat Treatment Effect of Heat Treatment and Hot Working on Vibrational and Mechanical Properties of Magnesium Alloy AZ91 [Volume 8, Issue 31, 2018, Pages 79-92]
  • Hibonite The effect of nano-alumina addition on the properties of high-alumina low-cement self-flowing refractory castables [Volume 8, Issue 29, 2018, Pages 29-42]
  • Hydrochloric acid Effect of Strain Rate on the Hot Tensile Behavior of Invar Alloy Failure analysis of clogging caused by corrosion of copper pipes containing chloride gas in the presence of moisture (case study) [Volume 8, Issue 31, 2018, Pages 29-40]

I

  • Incremental Forming The effect of ultrasonic vibrations on mechanical properties of low carbon steel-pure titanium bilayer sheet in incremental sheet forming process [Volume 8, Issue 32, 2018, Pages 109-124]
  • In-situ composite In-situ fabrication of titanium metal powder incorporated AA3003 /Al3Ti alloy composite by friction stir processing [Volume 8, Issue 32, 2018, Pages 57-70]
  • Intermetallic compound The effect of titanium interlayer on the mechanical and structural properties of steel- tungsten diffusion bonding [Volume 8, Issue 30, 2018, Pages 105-116]

L

  • Low alloy quench and tempered steel Influence of filler metal on the microstructure of dissimilar welds between UNS S32205 duplex stainless steel and ASTM A517 Quench and tempered steel [Volume 8, Issue 30, 2018, Pages 125-138]
  • Low-cement The effect of nano-alumina addition on the properties of high-alumina low-cement self-flowing refractory castables [Volume 8, Issue 29, 2018, Pages 29-42]

M

  • Magnesium alloy Effect of Heat Treatment and Hot Working on Vibrational and Mechanical Properties of Magnesium Alloy AZ91 [Volume 8, Issue 31, 2018, Pages 79-92]
  • MAX phase Investigation on the effects of the amount and source of carbon on synthesis of Ti2AlC nanostructure by self-propagating high temperature combustion synthesis method [Volume 8, Issue 29, 2018, Pages 57-68]
  • MAX phase Investigation on the effect of Al addition on synthesis of Ti3SiC2 nanostructure by Mechanical alloying – heat treatment method [Volume 8, Issue 30, 2018, Pages 15-28]
  • Melt spinning Investigation of crystallization kinetics of Co-Fe-Ta-Hf-B melt-spun glassy ribbon with a high thermal stability under isochronal condition [Volume 8, Issue 32, 2018, Pages 169-182]
  • Metallic glass Investigation of crystallization kinetics of Co-Fe-Ta-Hf-B melt-spun glassy ribbon with a high thermal stability under isochronal condition [Volume 8, Issue 32, 2018, Pages 169-182]
  • Micaceous iron oxide Evaluation of anti-corrosion properties of MIO pigments in the formulation of synthetic rubber based primer used in gas pipeline [Volume 8, Issue 29, 2018, Pages 109-120]
  • Microstructure Effects of severe plastic deformation on mechanical properties, electrical conductivity and microstructure of Al-7075 alloy [Volume 8, Issue 30, 2018, Pages 73-86]
  • Microstructure Effect of Sr on Microstructure and Mechanical Properties of AZ91 Magnesium Alloy [Volume 8, Issue 32, 2018, Pages 31-42]
  • Molecular Dynamics Studying mechanical behavior of non-wrinkled phosphorene nanotubes under uniaxial loading [Volume 8, Issue 30, 2018, Pages 117-124]
  • Molecular dynamics simulation Investigating the effect of particle size on Volume-per-atom parameter of TiO2 nanoparticles [Volume 8, Issue 29, 2018, Pages 81-90]

N

  • Nano-alumina The effect of nano-alumina addition on the properties of high-alumina low-cement self-flowing refractory castables [Volume 8, Issue 29, 2018, Pages 29-42]
  • Nanocomposite Study of Mechanical and Thermal Properties of NBR/PP-Nano Clay Composite [Volume 8, Issue 31, 2018, Pages 17-28]
  • Nanocomposite Synthesis of Fe3O4/SiO2/TiO2-Ag Core Shell Nanocomposites and Investigation of its Magnetic Properties [Volume 8, Issue 31, 2018, Pages 51-60]
  • Nanocomposite Synthesis and Study of Properties of Bioactive Glass (45S)/TiO2/Fluorapatite Nanocomposite [Volume 8, Issue 32, 2018, Pages 73-96]
  • Nano oxide particle Synthesis and Characterization of Nanoparticles of Magnesium-Copper Oxide with Paramagnetic Properties [Volume 8, Issue 30, 2018, Pages 163-172]
  • Nanoparticles Synthesis of copper-tin metal oxide nanoparticles by the electrical explosion wire method and investigation antibacterial properties [Volume 8, Issue 32, 2018, Pages 125-136]
  • Nanostructured coating and St37 steel Investigation of structure and tribological behavior of nanostructured DLC coating, deposited by PACVD and Arc-PVD processes [Volume 8, Issue 30, 2018, Pages 87-104]
  • Nanostructured thin films Investigation the effect of In-doping on the structural and optical properties of electrodeposited SnS thin film [Volume 8, Issue 32, 2018, Pages 43-56]
  • NBR/PP Study of Mechanical and Thermal Properties of NBR/PP-Nano Clay Composite [Volume 8, Issue 31, 2018, Pages 17-28]
  • Ni-P electroless Achieving optimal conditions for manufacturing of A356 aluminum alloy/ BN(h) composite using stir casting [Volume 8, Issue 29, 2018, Pages 129-146]
  • Non-wrinkled phosphorene nanotubes Studying mechanical behavior of non-wrinkled phosphorene nanotubes under uniaxial loading [Volume 8, Issue 30, 2018, Pages 117-124]

O

  • Open-cell copper foam Production of Open Cell Copper Foam and assessment of foam Substructure [Volume 8, Issue 31, 2018, Pages 1-16]
  • Open-cell copper foam Production of Open Cell Copper Foam and assessment of foam Substructure [Volume 8, Issue 31, 2018, Pages 179-191]
  • Optical Properties An investigation of vanadium concentration on the optical and electrical properties of TiO2 sol-gel derived thin films [Volume 8, Issue 30, 2018, Pages 173-182]
  • Optical Properties Investigation the effect of In-doping on the structural and optical properties of electrodeposited SnS thin film [Volume 8, Issue 32, 2018, Pages 43-56]
  • Optical Properties Synthesis and Investigation of Optical and Photocatalytic properties of ZnO nanoparticles co-doped with Ti/Si [Volume 8, Issue 32, 2018, Pages 71-82]

P

  • PACVD Investigation of structure and tribological behavior of nanostructured DLC coating, deposited by PACVD and Arc-PVD processes [Volume 8, Issue 30, 2018, Pages 87-104]
  • PEO Study of PEO on the fatigue behavior of titanium alloy Ti-6Al-4V [Volume 8, Issue 31, 2018, Pages 141-152]
  • Photocatalytic degradation Synthesis and Investigation of Optical and Photocatalytic properties of ZnO nanoparticles co-doped with Ti/Si [Volume 8, Issue 32, 2018, Pages 71-82]
  • Pipeline coating Evaluation of anti-corrosion properties of MIO pigments in the formulation of synthetic rubber based primer used in gas pipeline [Volume 8, Issue 29, 2018, Pages 109-120]
  • Polyurethane foam Production of Open Cell Copper Foam and assessment of foam Substructure [Volume 8, Issue 31, 2018, Pages 1-16]
  • Polyurethane foam Production of Open Cell Copper Foam and assessment of foam Substructure [Volume 8, Issue 31, 2018, Pages 179-191]
  • PU The effects of TiO2 nanoparticles on physical and thermal properties of polyurethane foam and sandwich panel [Volume 8, Issue 29, 2018, Pages 91-108]

Q

  • QFA Hardness Prediction in the Ni-Based Superalloy GTD-111 Using Quench Factor Analysis (QFA) [Volume 8, Issue 31, 2018, Pages 41-50]
  • Quench Factor Analysis Hardness Prediction in the Ni-Based Superalloy GTD-111 Using Quench Factor Analysis (QFA) [Volume 8, Issue 31, 2018, Pages 41-50]

R

  • Reinforcement Experimental Study on Creep Behavior of Al2024/SiC Composite Produced via Accumulative Roll Bonding (ARB) Process [Volume 8, Issue 31, 2018, Pages 153-166]
  • Rosa cannina Biosynthesis of silver nanopowders and evaluation on their application in cosmetic products [Volume 8, Issue 29, 2018, Pages 69-80]

S

  • Scanning electron microscopy Influence of filler metal on the microstructure of dissimilar welds between UNS S32205 duplex stainless steel and ASTM A517 Quench and tempered steel [Volume 8, Issue 30, 2018, Pages 125-138]
  • Scanning electron microscopy Synthesis and Characterization of Nanoparticles of Magnesium-Copper Oxide with Paramagnetic Properties [Volume 8, Issue 30, 2018, Pages 163-172]
  • Self-flow The effect of nano-alumina addition on the properties of high-alumina low-cement self-flowing refractory castables [Volume 8, Issue 29, 2018, Pages 29-42]
  • Self-propagation high-Temperature synthesis (SHS) Investigation on the effects of the amount and source of carbon on synthesis of Ti2AlC nanostructure by self-propagating high temperature combustion synthesis method [Volume 8, Issue 29, 2018, Pages 57-68]
  • Semi-solid forming Comparison of microstructures and mechanical properties of Al 7075 alloy obtained from conventional modified SIMA processes [Volume 8, Issue 32, 2018, Pages 149-158]
  • SIMA Comparison of microstructures and mechanical properties of Al 7075 alloy obtained from conventional modified SIMA processes [Volume 8, Issue 32, 2018, Pages 149-158]
  • Single phase- morphology Synthesis and Characterization of Nanoparticles of Magnesium-Copper Oxide with Paramagnetic Properties [Volume 8, Issue 30, 2018, Pages 163-172]
  • Si/Ti dopant Synthesis and Investigation of Optical and Photocatalytic properties of ZnO nanoparticles co-doped with Ti/Si [Volume 8, Issue 32, 2018, Pages 71-82]
  • Sol-Gel Synthesis and Study of Properties of Bioactive Glass (45S)/TiO2/Fluorapatite Nanocomposite [Volume 8, Issue 32, 2018, Pages 73-96]
  • Steel The effect of titanium interlayer on the mechanical and structural properties of steel- tungsten diffusion bonding [Volume 8, Issue 30, 2018, Pages 105-116]
  • Steel St37 Study of Microstructure and Mechanical properties of Welded mild steel fabricated by FCAW and Compare with GMAW Process [Volume 8, Issue 30, 2018, Pages 1-14]
  • Synthetic rubber primer Evaluation of anti-corrosion properties of MIO pigments in the formulation of synthetic rubber based primer used in gas pipeline [Volume 8, Issue 29, 2018, Pages 109-120]

T

  • Tensile and buckling behavior Studying mechanical behavior of non-wrinkled phosphorene nanotubes under uniaxial loading [Volume 8, Issue 30, 2018, Pages 117-124]
  • Thermoplastic elastomer Study of Mechanical and Thermal Properties of NBR/PP-Nano Clay Composite [Volume 8, Issue 31, 2018, Pages 17-28]
  • Thickness Study of Microstructure and Mechanical properties of Welded mild steel fabricated by FCAW and Compare with GMAW Process [Volume 8, Issue 30, 2018, Pages 1-14]
  • Thin Film An investigation of vanadium concentration on the optical and electrical properties of TiO2 sol-gel derived thin films [Volume 8, Issue 30, 2018, Pages 173-182]
  • Ti2AlC Investigation on the effects of the amount and source of carbon on synthesis of Ti2AlC nanostructure by self-propagating high temperature combustion synthesis method [Volume 8, Issue 29, 2018, Pages 57-68]
  • Ti3SiC2 Investigation on the effect of Al addition on synthesis of Ti3SiC2 nanostructure by Mechanical alloying – heat treatment method [Volume 8, Issue 30, 2018, Pages 15-28]
  • Ti-6Al-4V Study of PEO on the fatigue behavior of titanium alloy Ti-6Al-4V [Volume 8, Issue 31, 2018, Pages 141-152]
  • TiC powder The Effect of Pulsed Laser Parameters on Surface Compositing of H13-TiC [Volume 8, Issue 31, 2018, Pages 61-78]
  • Tin sulphide Investigation the effect of In-doping on the structural and optical properties of electrodeposited SnS thin film [Volume 8, Issue 32, 2018, Pages 43-56]
  • TiO2 nanoparticle Investigating the effect of particle size on Volume-per-atom parameter of TiO2 nanoparticles [Volume 8, Issue 29, 2018, Pages 81-90]
  • TiO2 nanoparticles The effects of TiO2 nanoparticles on physical and thermal properties of polyurethane foam and sandwich panel [Volume 8, Issue 29, 2018, Pages 91-108]
  • Titanium Alloy Study of PEO on the fatigue behavior of titanium alloy Ti-6Al-4V [Volume 8, Issue 31, 2018, Pages 141-152]
  • Titanium interlayer The effect of titanium interlayer on the mechanical and structural properties of steel- tungsten diffusion bonding [Volume 8, Issue 30, 2018, Pages 105-116]
  • Titanium oxide Synthesis of Fe3O4/SiO2/TiO2-Ag Core Shell Nanocomposites and Investigation of its Magnetic Properties [Volume 8, Issue 31, 2018, Pages 51-60]

U

  • Ultrasonic Vibration The effect of ultrasonic vibrations on mechanical properties of low carbon steel-pure titanium bilayer sheet in incremental sheet forming process [Volume 8, Issue 32, 2018, Pages 109-124]

V

  • Vanadium An investigation of vanadium concentration on the optical and electrical properties of TiO2 sol-gel derived thin films [Volume 8, Issue 30, 2018, Pages 173-182]
  • Volume-per-atom Investigating the effect of particle size on Volume-per-atom parameter of TiO2 nanoparticles [Volume 8, Issue 29, 2018, Pages 81-90]

W

  • Wear Fabrication and investigation of the properties of a water-based acrylic nanocomposite [Volume 8, Issue 32, 2018, Pages 97-108]
  • Wolfram The effect of titanium interlayer on the mechanical and structural properties of steel- tungsten diffusion bonding [Volume 8, Issue 30, 2018, Pages 105-116]

Z

  • Zinc Oxide Synthesis and Investigation of Optical and Photocatalytic properties of ZnO nanoparticles co-doped with Ti/Si [Volume 8, Issue 32, 2018, Pages 71-82]