Keyword Index

A

  • A106-B Steel Pipes Effect of Ultrasonic Impact Treatment on Fatigue Behavior of Steel Welded Pipes in Petrochemical Corrosive Environment [Volume 6, Issue 21, 2016, Pages 83-96]
  • A356 Al alloy Achieving optimal conditions for manufacturing of A356 aluminum alloy/ BN(h) composite using stir casting [Volume 8, Issue 29, 2018, Pages 129-146]
  • A356 Aluminum Foam Assessment of Aging Cycle for Coupering Its Aluminum Composite Foams with (A356-4% Cu) and A356 Foam Mechanical Behavior [Volume 6, Issue 21, 2016, Pages 37-52]
  • A516 steel Investigation of microstructure and mechanical properties of welding metal of A516-Gr70 steel in the presence of TiO2 by SAW method [Volume 12, Issue 45, 2021, Pages 1-20]
  • AA2024 The effect of severe plastic deformation on the natural ageing behavior of aluminum alloy 2024 [Volume 6, Issue 23, 2016, Pages 39-46]
  • AA3003-H14 alloy In-situ fabrication of titanium metal powder incorporated AA3003 /Al3Ti alloy composite by friction stir processing [Volume 8, Issue 32, 2018, Pages 57-70]
  • AA5086 Investigation of microstructure and hardness of surface composite AA5086(H116)/ZrO2 and surface hybrid composite AA5086(H116)/ZrO2/Gr fabricated by friction stir processing [Volume 6, Issue 23, 2016, Pages 101-114]
  • Ablation casting Effect of Ablation Casting on Microstructure of a Magnesium Alloy [Volume 8, Issue 32, 2018, Pages 159-168]
  • Abnormal mechanical properties Investigation of abnormal effect of dual-phase ferritic-bainitic microstructures on modification of mechanical properties of MO40 low alloy steel in comparison with full bainitic conditions [Volume 10, Issue 37, 2019, Pages 133-148]
  • Abrasion resistance Investigating the behavior of compressive strength and abrasion resistance of the floor tile at different sintering temperatures [Volume 10, Issue 37, 2019, Pages 63-74]
  • Absorbed energy Enzyme absorption rate of sandwich panels with aluminum foam core under the sky of drilling [Volume 3, Issue 10, , Pages 25-38]
  • Absorption Energy Assessment of Aging Cycle for Coupering Its Aluminum Composite Foams with (A356-4% Cu) and A356 Foam Mechanical Behavior [Volume 6, Issue 21, 2016, Pages 37-52]
  • AC conductivity Dielectric Properties of Multiferroic Composite Consisting Lithium Ferrite and Bismuth Titanate Synthesized by Combustion Method [Volume 8, Issue 30, 2018, Pages 139-152]
  • Accumulative roll bonding (ARB) Effect of Addition (MoSi2) on the Resistivity and Mechanical Properties of Cu/MoSi2 Composite Produced by Accumulative Rroll Bonding (ARB) Process [Volume 4, Vol.4/No.13/Autumn 2013, 2014, Pages 57-68]
  • Accumulative roll bonding process Production of Aluminum metal matrix composite reinforced with Al-Cr-Fe quasicrystal nano-powder by using accumulative roll bonding process and investigation mechanical properties [Volume 12, Issue 44, 2021, Pages 29-40]
  • Acicular Ferrite Determination Optimum Boron Quantity Effect on Low Temperature Impact Energy of Mild Steel Weld Metal that Fabricated by Submerge Arc Welding (SAW) [Volume 6, Issue 21, 2016, Pages 19-36]
  • Acicular Ferrite Investigation of microstructure and mechanical properties of welding metal of A516-Gr70 steel in the presence of TiO2 by SAW method [Volume 12, Issue 45, 2021, Pages 1-20]
  • Acidic Characterization of Silica Nanoparticles and Nanocolloid Synthesized in Acidic and Alkaline Media [Volume 12, Issue 43, 2021, Pages 56-69]
  • Acid washing Synthesis of barium carbonate by mechanochemical method [Volume 13, Issue 48, 2022, Pages 53-72]
  • Activated Carbon Synthesis and Characterization of Activated Carbon from Rice husk [Volume 11, Issue 40, 2021, Pages 125-136]
  • Activated Carbon Synthesis and Characterization of Activated Carbon Photocatalyst Modified with ZnO/SnO2 Nanoparticles and Its Application in the Municipal Wastewater Treatment with Advanced Oxidation Process [Volume 14, Issue 52, 2023, Pages 42-60]
  • Activated Carbon Synthesis and characterization of bio-nanocomposite of FeOOH-AC and its application in the removal of methyl orange anionic dye [Volume 14, Issue 53, 2023, Pages 69-90]
  • Activation energy Effect of Strain Rate on the Hot Tensile Behavior of Invar Alloy [Volume 6, Issue 23, 2016, Pages 31-38]
  • Activation energy Flow behavior and microstructural investigation of GTD 111 cast nickel base superalloy during hot pressure test [Volume 8, Issue 31, 2018, Pages 167-178]
  • Activation energy Investigation of creep behavior of ME21 and MX21 magnesium alloys [Volume 9, Issue 34, 2018, Pages 93-110]
  • Adhesion Evaluation of anti-corrosion properties of MIO pigments in the formulation of synthetic rubber based primer used in gas pipeline [Volume 8, Issue 29, 2018, Pages 109-120]
  • Adhesive bonding An investigation on the effect of adhesive bonding strength on bending behavior of sandwich panels with Al A356/SiCp composite foam core [Volume 7, Issue 27, 2016, Pages 85-94]
  • Adhesive Joint The Effect of Fiber Breakage Caused by Transient Shear Stress Distribution in Single-Lap Adhesive Joint Composite Material [Volume 6, Issue 21, 2016, Pages 1-18]
  • ADI The Comparative Study of ADI Machinability with 42CrMo4 Steel in Turning Process [Volume 4, Issue 15, 2014, Pages 11-20]
  • ADI Production of machinable ferritic-ausferritic ADI by selection of proper partially austenitizing time [Volume 10, Issue 36, 2019, Pages 93-106]
  • Adsorbent Removal Color From Aqueous Solution By Penta Aza Tetra Ethylene Supported On Polyacrylamide As a New Adsorbent Kinetic And Adsorption Isotherm Studies [Volume 8, Issue 29, 2018, Pages 13-28]
  • Adsorbent Efficient Removal of Omeprazole from Water Samples by Utilizing of Carbon Nanotubes as Powerful nanoadsorbent and Comprising with Graphite: Kinetic and Thermodynamic studies [Volume 12, Issue 46, 2021, Pages 1-18]
  • Adsorption Studying the Adsorption Behavior of Copper (II) Ions from Industrial Waste Water Solutions Using Corncob Particles [Volume 4, Vol.4/No.13/Autumn 2013, 2014, Pages 35-46]
  • Adsorption Batch adsorption and removal of Methylene Blue (MB) from wastewater using Tassel as a cheap bioadsorbent [Volume 4, Issue 16, 2014, Pages 81-98]
  • Adsorption Study of tea compost column biofilter efficiency to remove some heavy metal ions from aqueous solutions [Volume 7, Issue 28, 2016, Pages 67-80]
  • Adsorption Synthesis, Characterization and investigation of removal process of methylene blue dye by perovskite-type oxides nanoparticles La0.9Sr0.1FeO3 [Volume 10, Issue 35, 2019, Pages 145-168]
  • Adsorption Removal Propargite pesticide from aqueous solution using Penta Aza Tetra Ethylene on Polyacrylamide (PAA-N5) as a novel adsorbent [Volume 10, Issue 38, 2019, Pages 109-124]
  • Adsorption Study of Amitriptyline drug adsorption on multi walled carbon nanotube (MWCNT) [Volume 12, Issue 43, 2021, Pages 70-81]
  • Adsorption Isotherm Investigation of the Efficiency, Kinetics and Isothermic Behavior of Hexavalent Chromium Adsorption from Aqueous Solutions by Using Bioactive Adsorbents (Oak, Pomegranate and Egg Shell) [Volume 10, Issue 37, 2019, Pages 75-90]
  • Advanced oxidation process Synthesis and Characterization of Activated Carbon Photocatalyst Modified with ZnO/SnO2 Nanoparticles and Its Application in the Municipal Wastewater Treatment with Advanced Oxidation Process [Volume 14, Issue 52, 2023, Pages 42-60]
  • Advanced XPS characteristics Deposition of spinel cobalt nickel on nickel foam by a constant current electrochemical method and its supercapacitor application [Volume 10, Issue 35, 2019, Pages 39-48]
  • Age Hardenable Alloys Large Eenhancement in Mechanical Properties of Al 2024 Alloy After Single Rolling Pass [Volume 4, Issue 15, 2014, Pages 67-78]
  • Ag filler Investigation of effective parameters on dissimilar infrared brazing for Ti-6Al-4Vv and SS316 L by Ag Base filler metal [Volume 11, Issue 41, 2021, Pages 1-16]
  • Aging Heat Treatment Assessment of Aging Cycle for Coupering Its Aluminum Composite Foams with (A356-4% Cu) and A356 Foam Mechanical Behavior [Volume 6, Issue 21, 2016, Pages 37-52]
  • Ag nanoparticles Biosynthesis of silver nanopowders and evaluation on their application in cosmetic products [Volume 8, Issue 29, 2018, Pages 69-80]
  • Ag particle Synthesis of Fe3O4/SiO2/TiO2-Ag Core Shell Nanocomposites and Investigation of its Magnetic Properties [Volume 8, Issue 31, 2018, Pages 51-60]
  • Agriculture wastes Synthesis and Characterization of Activated Carbon Photocatalyst Modified with ZnO/SnO2 Nanoparticles and Its Application in the Municipal Wastewater Treatment with Advanced Oxidation Process [Volume 14, Issue 52, 2023, Pages 42-60]
  • AISI 316 Stainless Steel Determination of the Degree of Sensitization in AISI 316 Stainless Steel by the Electrochemical Impedance Technique [Volume 4, Issue 16, 2014, Pages 29-42]
  • AISI 321 steel Effect of temperature and time, the interlayer on microstructure and mechanical properties of Transient Liquid Phase (TLP) bonding of AISI321 stainless steel [Volume 7, Issue 28, 2016, Pages 95-112]
  • Al2024 Alloy Preparation of Super-High Strength Bimodal Aluminum Based Nanocomposite Via Mechanical Alloying and Hot Extrusion [Volume 4, Vol.4/No.13/Autumn 2013, 2014, Pages 83-98]
  • Al2O3 Fabrication of Crystalline Ni-B-Al2O3 Composite Coating by Electroless Method and its Tribological Characterizations [Volume 4, Issue 16, 2014, Pages 21-29]
  • Al3Ti aluminide In-situ fabrication of titanium metal powder incorporated AA3003 /Al3Ti alloy composite by friction stir processing [Volume 8, Issue 32, 2018, Pages 57-70]
  • Al-5Ti-1B Grain Refiner Effect of Cooling Rate and Grain Refining Agents on Microstructure Characteristics of Al-Cu Alloys by Computer- Aided Cooling Curve Method [Volume 6, Issue 23, 2016, Pages 75-88]
  • Al 6061 alloy Influence of Process Parameters on Hot Backward Extrusion of Al 6061 alloy [Volume 8, Issue 30, 2018, Pages 153-162]
  • Al6061 alloy Investigation of wear properties of Al6061 alloy and composite containing CNT produced by mechanical alloying and hot pressing process [Volume 9, Issue 33, 2018, Pages 53-66]
  • Al 7075 alloy Comparison of microstructures and mechanical properties of Al 7075 alloy obtained from conventional modified SIMA processes [Volume 8, Issue 32, 2018, Pages 149-158]
  • Al-7075 alloy Effects of severe plastic deformation on mechanical properties, electrical conductivity and microstructure of Al-7075 alloy [Volume 8, Issue 30, 2018, Pages 73-86]
  • Al-Cu alloys Effect of Cooling Rate and Grain Refining Agents on Microstructure Characteristics of Al-Cu Alloys by Computer- Aided Cooling Curve Method [Volume 6, Issue 23, 2016, Pages 75-88]
  • Al-Cu bimetal The Study of the Effects Intermetallic Phases Formation on the Bond Strength and Electrical Resistivity of Al/Cu Bimetal produced by Compound Static Casting [Volume 7, Issue 27, 2016, Pages 27-44]
  • Alkaline Characterization of Silica Nanoparticles and Nanocolloid Synthesized in Acidic and Alkaline Media [Volume 12, Issue 43, 2021, Pages 56-69]
  • Alkaline Leaching Investigation on Effect of Crystallization Step in Antimony Recovery Using Hydrometallurgical Method in Alkaline Sulphide Solutions [Volume 10, Issue 38, 2019, Pages 79-94]
  • Allium hooshidaryae A new method for the green synthesis of Fe3O4 nanoparticles using Alliaceae plant extract and investigating their properties [Volume 14, Issue 53, 2023, Pages 35-52]
  • Alloy The Experimental and Numerical Evaluation of the Residual Stress in the Hot Forming Sheet Process for 5083 Aluminum via the Gas Blowing Process [Volume 7, Issue 25, 2016, Pages 13-22]
  • Alumina Diffusion Bonded Alumina Bodies Using Hydride Nanopowders Interlayers and Structural Investigation of Joint Interface [Volume 5, Issue 17, 2014, Pages 1-14]
  • Alumina Particles Effects of Alumina Particles and Carbon Monoxide Gas Bubbles Within the Melt on the Graphite Morphology and Microstructure of Gray Cast Iron [Volume 6, Issue 22, 2016, Pages 1-12]
  • Aluminium Experimental Study on Creep Behavior of Al2024/SiC Composite Produced via Accumulative Roll Bonding (ARB) Process [Volume 8, Issue 31, 2018, Pages 153-166]
  • Aluminium Investigation of the structure and mechanical properties of aluminum 6061-graphene nanocomposite fabricated by the friction stir processing [Volume 13, Issue 48, 2022, Pages 73-90]
  • Aluminium alloys A New Method to Investigate Localized Corrosion on 2024, 7075 and 6061 Aluminium Alloys in the Sea-Like Atmosphere Environments [Volume 4, Vol.4/No.13/Autumn 2013, 2014, Pages 69-82]
  • Aluminium Cast Iron The Effects of Heat Treatment Parameters on the Microstructures of Aluminium Ductile Cast Iron [Volume 4, Issue 14, 2014, Pages 67-78]
  • Aluminothermic reduction Aluminothermic Reduction of Khatoon Abad Molybdenum Trioxide in Microwave: Investigation on the Effect of Aluminum Particle Size and Scale-up on the Reduction Process [Volume 11, Issue 40, 2021, Pages 91-106]
  • Aluminum Addition of 6.2% Aluminum on the Microstructure and Mechanical Properties of Hypoeutectic Gray Iron [Volume 4, Vol.4/No.13/Autumn 2013, 2014, Pages 13-20]
  • Aluminum Alloy Investigation of microstructure and hardness of surface composite AA5086(H116)/ZrO2 and surface hybrid composite AA5086(H116)/ZrO2/Gr fabricated by friction stir processing [Volume 6, Issue 23, 2016, Pages 101-114]
  • Aluminum alloy scrap Aluminum nanocrystalline powder production from aluminum alloy scrap by solid state recycling method [Volume 14, Issue 51, 2023, Pages 1-16]
  • Aluminum Foam Fabrication of Aluminum Foam by ARB and Investigation on Its Friction Stir Welded Joint Properties [Volume 5, Issue 17, 2014, Pages 27-39]
  • Aluminum Foam Enzyme absorption rate of sandwich panels with aluminum foam core under the sky of drilling [Volume 3, Issue 10, , Pages 25-38]
  • Aluminum Foam Investigation and Simulation of Quasi-Static Perforation Test on Sandwich Panels with Al A356/SiCp Composite Foam Core [Volume 6, Issue 22, 2016, Pages 13-28]
  • Aluminum Foam An investigation on the effect of adhesive bonding strength on bending behavior of sandwich panels with Al A356/SiCp composite foam core [Volume 7, Issue 27, 2016, Pages 85-94]
  • Aluminum matrix composite Production of Aluminum metal matrix composite reinforced with Al-Cr-Fe quasicrystal nano-powder by using accumulative roll bonding process and investigation mechanical properties [Volume 12, Issue 44, 2021, Pages 29-40]
  • Aluminum-matrix composite Wear Properties of Al-Gr Composites Produced Using Liquid Homogenization Followed by Cold Press-Sintering [Volume 7, Issue 26, 2016, Pages 95-104]
  • Aluminum nanocrystalline powder Aluminum nanocrystalline powder production from aluminum alloy scrap by solid state recycling method [Volume 14, Issue 51, 2023, Pages 1-16]
  • Aluminum powder Spark plasma sintering of aluminum 3000 and 5000 alloys powder obtained from recycling of Used Beverage Cans (UBCs) [Volume 14, Issue 54, 2023, Pages 17-34]
  • Aluminum-Silicon alloy Investigating the effect of silicon content on structure and corrosion resistance by plasma electrolytic oxidation on aluminum-silicon alloys [Volume 14, Issue 53, 2023, Pages 21-34]
  • AM60 alloy Modification of mechanical properties of friction stir welded AM60 magnesium alloy with changing rotational speed and addition of nano alumina particles [Volume 12, Issue 45, 2021, Pages 47-64]
  • Amitriptyline drug Study of Amitriptyline drug adsorption on multi walled carbon nanotube (MWCNT) [Volume 12, Issue 43, 2021, Pages 70-81]
  • Amorphous Optimizing Parameters for Chemical Synthesis of Fe-B Alloy Nanoparticles by Taguchi Method [Volume 4, Issue 15, 2014, Pages 21-28]
  • Anatase Synthesis of strontium titanate from celestite concentrate [Volume 10, Issue 37, 2019, Pages 105-118]
  • Anatase Effect of metallic agent on the carbothermic reduction of titanium dioxide in order to produce titanium carbide [Volume 12, Issue 44, 2021, Pages 65-82]
  • Annealing in hydrogen atmosphere Modification of the surface morphology of atmospheric plasma sprayed tungsten coating for X-ray tube application [Volume 8, Issue 32, 2018, Pages 137-146]
  • Antibacterial Synthesis of copper-tin metal oxide nanoparticles by the electrical explosion wire method and investigation antibacterial properties [Volume 8, Issue 32, 2018, Pages 125-136]
  • Antibacterial Property Synthesis and Evaluation of Antibacterial Activity of Silver-Doped Titania Nanoparticles as an Antibacterial Additive to Dental Materials [Volume 4, Vol.4/No.13/Autumn 2013, 2014, Pages 21-34]
  • Antibacterial Property Investigation of Antibacterial Properties of Silver Nanoparticles and Polyethylene-Silver Nanocomposites [Volume 6, Issue 22, 2016, Pages 159-168]
  • Antimony Recovery Investigation on Effect of Crystallization Step in Antimony Recovery Using Hydrometallurgical Method in Alkaline Sulphide Solutions [Volume 10, Issue 38, 2019, Pages 79-94]
  • API GRB steel Investigating the effect of banding on the impact resistance behavior of microalloy steel used in pipelines [Volume 3, Issue 10, , Pages 57-66]
  • API X65 pipeline steel Modeling the hot deformation flow curves of API X65 pipeline steel using the exponential law equation [Volume 6, Issue 24, 2016, Pages 39-50]
  • API X70 steel Study on microstructure and mechanical properties of API X70 steel at various hot rolling conditions [Volume 11, Issue 41, 2021, Pages 79-90]
  • Apricot kernel shell Synthesis and characterization of bio-nanocomposite of FeOOH-AC and its application in the removal of methyl orange anionic dye [Volume 14, Issue 53, 2023, Pages 69-90]
  • APS-Wcoating Modification of the surface morphology of atmospheric plasma sprayed tungsten coating for X-ray tube application [Volume 8, Issue 32, 2018, Pages 137-146]
  • Aqueous Solution Investigation of the Efficiency, Kinetics and Isothermic Behavior of Hexavalent Chromium Adsorption from Aqueous Solutions by Using Bioactive Adsorbents (Oak, Pomegranate and Egg Shell) [Volume 10, Issue 37, 2019, Pages 75-90]
  • ARB process Characterization of mechanical and corrosion behaviour of multilayered Cu/Al/Al2O3 nano-composite produced by ARB process [Volume 7, Issue 28, 2016, Pages 149-162]
  • Arc-PVD Investigation of structure and tribological behavior of nanostructured DLC coating, deposited by PACVD and Arc-PVD processes [Volume 8, Issue 30, 2018, Pages 87-104]
  • Artificial Neural Networks Determining the Compressive Strength of Green Sand Moulds with Different Moisture Contents, Using Artificial Neural Networks [Volume 4, Vol.4/No.13/Autumn 2013, 2014, Pages 47-56]
  • Astaloy85Mo Dry sliding wear behavior of Astaloy85Mo steel surface melted by gas tungsten arc welding [Volume 7, Issue 28, 2016, Pages 27-38]
  • ASZ Effect of bonding time and temperature on microstructure of GTD-111/ BNi-3 /GTD-111 system during the Transient Liquid Phase (TLP) [Volume 11, Issue 39, 2021, Pages 91-108]
  • Atmospheric Plasma Spraying (APS) Modification of the surface morphology of atmospheric plasma sprayed tungsten coating for X-ray tube application [Volume 8, Issue 32, 2018, Pages 137-146]
  • Austenite Modelling of austenite decomposition transformation of heat affected zone in API-X65 and X70 pipeline steels [Volume 9, Issue 33, 2018, Pages 125-136]
  • Austenitic stainless steel A Survey of Mechanism and Kinetic of Oxidation of Welding Lines in Austenitic Stainless Steel AISI321 [Volume 6, Issue 21, 2016, Pages 109-120]
  • Austenitic stainless steel improvement of mechanical properties and hot cracking susceptibility of 304 stainless steel weld joints with the simultaneous electromagnetic vibration application [Volume 9, Issue 33, 2018, Pages 137-148]
  • Autocatalytic behavior Investigation of crystallization kinetics of Co-Fe-Ta-Hf-B melt-spun glassy ribbon with a high thermal stability under isochronal condition [Volume 8, Issue 32, 2018, Pages 169-182]
  • AZ61‒0.7Si alloy Indentation creep behavior of AZ61-0.7Si-xCa magnesium alloys [Volume 10, Issue 35, 2019, Pages 1-14]
  • AZ81 alloy Effect of Ablation Casting on Microstructure of a Magnesium Alloy [Volume 8, Issue 32, 2018, Pages 159-168]
  • AZ91D/SiC metal matrix composite Fabrication of AZ91D/SiC Magnesium Matrix Composite with High Particle Reinforcement Loading, Produced by Mechanical Milling of Chips and Semi-Solid Powder Processing [Volume 10, Issue 36, 2019, Pages 17-32]
  • AZ91 magnesium alloy Effect of Sr on Microstructure and Mechanical Properties of AZ91 Magnesium Alloy [Volume 8, Issue 32, 2018, Pages 31-42]
  • AZ91 magnesium alloy Effect of Pb on Microstructure and Mechanical Properties of AZ91 Magnesium Alloy [Volume 9, Issue 33, 2018, Pages 25-36]
  • AZ91 magnesium alloy Tensile behavior of AZ91 alloy containing silver and under different casting conditions [Volume 13, Issue 50, 2022, Pages 60-80]

B

  • B4C The effect of B4C particle contents on hardness and wear resistance of Al-SiC-B4C composite formatted on AA332 via GTAW process [Volume 8, Issue 31, 2018, Pages 123-140]
  • Backscattered Electron Diffraction (EBSD Introduction to Backscattered Electron Diffraction (EBSD) [Volume 4, Issue 11, 2014, Pages 56-72]
  • Backward Extrusion Influence of Process Parameters on Hot Backward Extrusion of Al 6061 alloy [Volume 8, Issue 30, 2018, Pages 153-162]
  • Ball Diameter Evaluation of Milling Time and Balls Diameters during Surface Mechanical Coating (SMC) in the Presence of Copper Powder and Nickel Balls [Volume 7, Issue 27, 2016, Pages 67-84]
  • Ball Mill Determination of the Effects of Milling Atmosphere on the Production Process and Characteristics of Boron Nanopowders [Volume 6, Issue 24, 2016, Pages 63-76]
  • Ball milling A review on the extraction of lithium from its minerals - Case study: Lithium extraction from spodumene concentrate using sulfation roasting under ball milling conditions [Volume 11, Issue 40, 2021, Pages 75-90]
  • Band gap energy Investigation the effect of In-doping on the structural and optical properties of electrodeposited SnS thin film [Volume 8, Issue 32, 2018, Pages 43-56]
  • Barite Synthesis of barium carbonate by mechanochemical method [Volume 13, Issue 48, 2022, Pages 53-72]
  • Barium carbonate Synthesis of barium carbonate by mechanochemical method [Volume 13, Issue 48, 2022, Pages 53-72]
  • Battery Synthesis of nano divalent silver oxide for using in primary zinc-silver oxide battery [Volume 8, Issue 29, 2018, Pages 43-56]
  • Bending test Flexural Properties of Epoxy Matrix Composites Reinforced by Milled Fibers [Volume 6, Issue 23, 2016, Pages 47-60]
  • Bimetal Sheet The effect of ultrasonic vibrations on mechanical properties of low carbon steel-pure titanium bilayer sheet in incremental sheet forming process [Volume 8, Issue 32, 2018, Pages 109-124]
  • Bimodal Composite Preparation of Super-High Strength Bimodal Aluminum Based Nanocomposite Via Mechanical Alloying and Hot Extrusion [Volume 4, Vol.4/No.13/Autumn 2013, 2014, Pages 83-98]
  • Bioactive glass (45S) Synthesis and Study of Properties of Bioactive Glass (45S)/TiO2/Fluorapatite Nanocomposite [Volume 8, Issue 32, 2018, Pages 73-96]
  • Bioactivity Investigation of Effect of Heat Treatment on Produced Phases in 45S5 Glass-Ceramics Synthesized in the Forms of Powder and Pellet, and Investigation of Their Bioactivity [Volume 9, Issue 34, 2018, Pages 1-16]
  • Bioactivity Investigating the effect of replacing CaO with CaF2 on bioactivity and compressive strength of 45S5 glass ceramic synthesized from soda-lime glass waste by solid state method [Volume 14, Issue 51, 2023, Pages 39-57]
  • Biocompatibility Study on the capacity of medicinal intake and release of the polymeric polyurethane and biological parts of pomegranate fruit nanocomposite [Volume 13, Issue 47, 2022, Pages 71-90]
  • Biodegradable Design and Synthesis of Biodegradable Nano-Glass Composite for Use in Tissue Culture Engineering [Volume 4, Issue 14, 2014, Pages 11-30]
  • Biomaterials Investigation of Effect of Heat Treatment on Produced Phases in 45S5 Glass-Ceramics Synthesized in the Forms of Powder and Pellet, and Investigation of Their Bioactivity [Volume 9, Issue 34, 2018, Pages 1-16]
  • Bismuth vanadate ساخت و مشخصه یابی فوتوالکترود تیتانیوم دی اکسید مزو متخلخل قالب گیری شده ی اتصال یافته با بیسموت وانادات [Volume 12, Issue 46, 2021, Pages 59-74]
  • Bond Coat Effect of Aluminum Content in Pack Cementation Mixture on Microstructure and Cyclic Oxidation Performance of Zr-modified Aluminide Coatings [Volume 6, Issue 23, 2016, Pages 19-30]
  • Bone Design and Synthesis of Biodegradable Nano-Glass Composite for Use in Tissue Culture Engineering [Volume 4, Issue 14, 2014, Pages 11-30]
  • Bone tissue engineering Synthesis and characterization of tissue engineering network scaffold composed of polycaprolactone diol / polyethyleneglycol / hydroxyapatite [Volume 10, Issue 37, 2019, Pages 33-46]
  • Borocarbothermal Synthesis of Zirconium Diboride Via Carbothermal, Borothermal, and Borocarbothermal Activation Methods [Volume 6, Issue 22, 2016, Pages 169-180]
  • Boron Determination Optimum Boron Quantity Effect on Low Temperature Impact Energy of Mild Steel Weld Metal that Fabricated by Submerge Arc Welding (SAW) [Volume 6, Issue 21, 2016, Pages 19-36]
  • Boron Carbide Thermodynamic Analysis of Pressureless Sintering of B4C-Si Nano Composite by Factsage Software [Volume 4, Issue 15, 2014, Pages 79-90]
  • Boron Carbide Studies the Effect of Time Sensitization and Activation Process and Electroless Bath Temperature on the Creation of Uniform Coating of Copper Metal on Boron Carbide Particles [Volume 4, Issue 16, 2014, Pages 13-20]
  • Boron Carbide Investigation of Effect of Milling Time on Final Microstructure of Nanocrystalline TiB2-TiC Powder Fabricated by MACS Method [Volume 5, Issue 17, 2014, Pages 15-26]
  • Boron Carbide Neutron Absorption Properties of Geopolymeric Composite used Taftan Mountain Volcanic Ash [Volume 10, Issue 37, 2019, Pages 19-32]
  • Boron Carbide The role of Ex-situ 0.5wt.% B4C reinforcement and later formed In–situ TiC and TiBw on microstructural evolution of Ti-10Mo mixed powder alloy [Volume 13, Issue 50, 2022, Pages 19-32]
  • Boron Carbide Mo diffusion and In-situ formation of reinforcement in spark plasma sintering of powder mixed Ti-10Mo-1.5B4C composite at different temperatures and holding time [Volume 14, Issue 52, 2023, Pages 1-18]
  • Boron Nanoparticles Determination of the Effects of Milling Atmosphere on the Production Process and Characteristics of Boron Nanopowders [Volume 6, Issue 24, 2016, Pages 63-76]
  • Boron Nitride Achieving optimal conditions for manufacturing of A356 aluminum alloy/ BN(h) composite using stir casting [Volume 8, Issue 29, 2018, Pages 129-146]
  • Boron Oxide Neutron Absorption Properties of Geopolymeric Composite used Taftan Mountain Volcanic Ash [Volume 10, Issue 37, 2019, Pages 19-32]
  • Borothermal Synthesis of Zirconium Diboride Via Carbothermal, Borothermal, and Borocarbothermal Activation Methods [Volume 6, Issue 22, 2016, Pages 169-180]
  • Bromocroso green Removal Color From Aqueous Solution By Penta Aza Tetra Ethylene Supported On Polyacrylamide As a New Adsorbent Kinetic And Adsorption Isotherm Studies [Volume 8, Issue 29, 2018, Pages 13-28]
  • Bulk Nano-Structured Carbon Steel Microstructure and Mechanical Properties of Plain Low Carbon Steel Processed by Integrated Extrusion and Equal Channel Angular Pressing (Ex-ECAP) [Volume 6, Issue 22, 2016, Pages 55-64]

C

  • Cadmium selenide Synthesis of Different Nanostructured Morphologies of Cadmium Selenide by Changing the Solvent in Solvothermal Process. [Volume 4, Issue 14, 2014, Pages 93-102]
  • Calcination Novel Synthesis of Pure and Zinc-doped Tin Dioxide by using Urea-based Solvent [Volume 10, Issue 36, 2019, Pages 83-92]
  • Calcium phosphate coating Electrochemical deposition of calcium phosphate coating on the Ti-10Mo-X (TiC & TiB2) composite produced by spark plasma sintering [Volume 13, Issue 48, 2022, Pages 33-52]
  • Carbide decomposition reaction Tracing the creep lifetime degradation of IN738LC superalloy based on the primary carbide decomposition reaction and composition changes in the carbide regions [Volume 11, Issue 42, 2021, Pages 81-94]
  • Carbon The Effect of Sodium Hexametaphosphate on the Physical and Mechanical Properties of Monolithic Refractories Prepared from the Wastes of Magnesia - Carbon Bricks [Volume 6, Issue 22, 2016, Pages 45-54]
  • Carbon fiber Flexural Properties of Epoxy Matrix Composites Reinforced by Milled Fibers [Volume 6, Issue 23, 2016, Pages 47-60]
  • Carbon fiber Investigating the Tribological Behavior of Epoxy Matrix Composites Reinforced by Milled Fibers [Volume 6, Issue 24, 2016, Pages 51-62]
  • Carbon monoxide Investigating Nanocomposite thin Film of PEDOT: PSS/SnO2 as CO gas Sensor [Volume 4, Issue 14, 2014, Pages 55-66]
  • Carbon Monoxide Bubbles Effects of Alumina Particles and Carbon Monoxide Gas Bubbles Within the Melt on the Graphite Morphology and Microstructure of Gray Cast Iron [Volume 6, Issue 22, 2016, Pages 1-12]
  • Carbon Nanotube Investigation and comparison of electromagnetic properties of epoxy-graphene and epoxy-carbon nanotube nanocomposites [Volume 7, Issue 26, 2016, Pages 85-94]
  • Carbon Nanotube The effect of carbon nanotube surface modification on conductivity behavior of carbon nanotube reinforced polythene matrix hybrid HDPE composite with segregate structure [Volume 13, Issue 49, 2022, Pages 57-71]
  • Carbon Nanotubes The effect of carbon nano tubes on the compressive strength and flexural of epoxy honeycomb sandwich panels [Volume 10, Issue 35, 2019, Pages 49-62]
  • Carbon Steel Tube An Investigation of Flow Accelerated(assisted) Erosion-Corrosion in High Pressure Economizer Tubes(HP-EC) of Boiler Unite 1 at Kerman Combined Cycle Power Plant [Volume 5, Issue 17, 2014, Pages 65-81]
  • Carbothermal Synthesis of Zirconium Diboride Via Carbothermal, Borothermal, and Borocarbothermal Activation Methods [Volume 6, Issue 22, 2016, Pages 169-180]
  • Castable refractory The effect of nano-alumina addition on the properties of high-alumina low-cement self-flowing refractory castables [Volume 8, Issue 29, 2018, Pages 29-42]
  • Casting A356 aluminum foam Assessment of plastic deformation of the A356 foam sandwich panel during compression and bending tests [Volume 10, Issue 35, 2019, Pages 129-144]
  • Cathode Synthesizing and investigation on the electrochemical behavior of (Nd0.9La0.1)1.95Sr0.05Ni0.75Cu0.25O4-d and (Nd0.9La0.1)1.9Sr0.1Ni0.75Cu0.25O4-d cathode electrode for solid oxide fuel cell [Volume 9, Issue 33, 2018, Pages 1-12]
  • Cathode¸ Linear Sweep Voltammetry Production of Porous Carbon Nanoparticles by Usingzinc Layered Gallate Nanohybrid Precursors and Investigate Its Aapplications as Polymeric Fuel Cell Cathode Catalyst [Volume 6, Issue 22, 2016, Pages 111-126]
  • Cathodic plasma electrolysis Graphene nanosheets film by plasma electrolysis deposition [Volume 7, Issue 26, 2016, Pages 75-84]
  • Cathodic Protection An Investigation on Stress Corrosion Cracking Behaviorof API-5L-X52 Steel in Near Neutral pH Solution [Volume 5, Issue 17, 2014, Pages 55-64]
  • Cation Distribution Cation Distribution, Structural Parameters and Magnetic Moment in the Spinel Structure of Li-Zn Ferrite Prepared by Glycine-Nitrate Process [Volume 4, Issue 15, 2014, Pages 91-102]
  • Cation Distribution Structure, Microstructure, Magnetic and Electromagnetic Properties Ni-Mn-Zn Ferrite Produced by Glycine-Nitrate Process [Volume 7, Issue 27, 2016, Pages 45-56]
  • Cavity Nucleation Root Cause Analysis of Water-Cooled Exhaust Manifold in High Speed Marine Diesel Engine [Volume 11, Issue 42, 2021, Pages 1-16]
  • CCT Diagram Study of Phase Transformation in Martensitic Stainless Steel AISI 422 During Continuous Cooling [Volume 6, Issue 22, 2016, Pages 79-90]
  • Celestite Synthesis of strontium titanate from celestite concentrate [Volume 10, Issue 37, 2019, Pages 105-118]
  • Central Composite Experimental Design A detailed DOE study on temperature, concentration and their interactions on corrosion protection of carbon steel [Volume 12, Issue 45, 2021, Pages 77-94]
  • CeO2 Investigating the effects of 2.5 mol% Ce doping on electrostriction behavior of lead-free (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 ceramics [Volume 10, Issue 35, 2019, Pages 101-114]
  • Cephalexin Optimization of Photocatalytic Degradation of Cephalexin Drug Contaminant from Aqueous Solutions by Synthesized Zn-MOC Nanostructures Using Response Surface Methodology [Volume 12, Issue 43, 2021, Pages 94-108]
  • Ceramic Dielectric Characterization and Dielectric Properties of Nanocrystalline NiO-based Electroceramics Prepared by Mechanical Alloying [Volume 4, Issue 14, 2014, Pages 41-54]
  • C/G-f measurements The effect of manganese impurity on the interlayer Al/PVP:CdS/P-Si Schottky structure and its dielectric properties [Volume 12, Issue 43, 2021, Pages 23-35]
  • Characteristic area Production of Open Cell Copper Foam and assessment of foam Substructure [Volume 8, Issue 31, 2018, Pages 1-16]
  • Characteristic area Production of Open Cell Copper Foam and assessment of foam Substructure [Volume 8, Issue 31, 2018, Pages 179-191]
  • Chemical synthesis Optimizing synthesis parameters of silver nanowires by polyol method [Volume 12, Issue 45, 2021, Pages 21-32]
  • Chemical Vapor Deposition (CVD) Modification of the surface morphology of atmospheric plasma sprayed tungsten coating for X-ray tube application [Volume 8, Issue 32, 2018, Pages 137-146]
  • Chitosan Synthesis of porous hydroxyapatite nano particles via sol-gel route by using different organic polymers [Volume 11, Issue 41, 2021, Pages 49-62]
  • Chlorine Effect of Strain Rate on the Hot Tensile Behavior of Invar Alloy Failure analysis of clogging caused by corrosion of copper pipes containing chloride gas in the presence of moisture (case study) [Volume 8, Issue 31, 2018, Pages 29-40]
  • Chromium Investigation of the Efficiency, Kinetics and Isothermic Behavior of Hexavalent Chromium Adsorption from Aqueous Solutions by Using Bioactive Adsorbents (Oak, Pomegranate and Egg Shell) [Volume 10, Issue 37, 2019, Pages 75-90]
  • Chromium Effect of MCrAlY coating on crack formation during thermal fatigue testing of a directionally solidified Nickle based superalloy [Volume 13, Issue 50, 2022, Pages 81-97]
  • Cladding The effect of Si addition on microstructure and tribological properties of Fe-Al claddings produced by GTAW process [Volume 10, Issue 37, 2019, Pages 149-162]
  • Clay Investigating the simultaneous role of clay nanoparticles and strain rate on the tensile behavior of polyethylene matrix nanocomposite [Volume 13, Issue 50, 2022, Pages 23-45]
  • Clinoptilolite zeolite Magnesiothermal synthesis of nanostructured SiC from natural zeolite (clinoptilolite),sacarose and mesoporous carbon CMK-1 under Argon atmospher [Volume 6, Issue 23, 2016, Pages 139-148]
  • Cloisite®15A Nano clay Study of Mechanical and Thermal Properties of NBR/PP-Nano Clay Composite [Volume 8, Issue 31, 2018, Pages 17-28]
  • CNT Investigation of wear properties of Al6061 alloy and composite containing CNT produced by mechanical alloying and hot pressing process [Volume 9, Issue 33, 2018, Pages 53-66]
  • CO2 Corrosion Corrosion assessment of Amine regenerator column of SPGC using process simulation in gas sweetening unit to mitigate corrosion rate by controlling process parameters [Volume 10, Issue 37, 2019, Pages 91-104]
  • Coating Study of optical properties, thermal behavior and thermal stability of coated PETN particles with Lithol rubine nano-pigment via ultrasonic technique using Taguchi experimental design method [Volume 10, Issue 35, 2019, Pages 63-76]
  • Coating Evaluation of tribological behavior of PEO composite coating containing SiO2 particles on 7075 aluminum alloy [Volume 13, Issue 49, 2022, Pages 72-85]
  • Coating Effect of MCrAlY coating on crack formation during thermal fatigue testing of a directionally solidified Nickle based superalloy [Volume 13, Issue 50, 2022, Pages 81-97]
  • Coating Investigating the effect of silicon content on structure and corrosion resistance by plasma electrolytic oxidation on aluminum-silicon alloys [Volume 14, Issue 53, 2023, Pages 21-34]
  • Cobaltite Nickel Deposition of spinel cobalt nickel on nickel foam by a constant current electrochemical method and its supercapacitor application [Volume 10, Issue 35, 2019, Pages 39-48]
  • CoFe2O4 Investigation of Phase Evolution of CoFe2O4 Nanoparticles Prepared by limited Mechanical Activation and Heat Treatment in Comparison to Conventional Powder Metallurgy Route [Volume 4, Issue 14, 2014, Pages 31-40]
  • Cold press-sintering Wear Properties of Al-Gr Composites Produced Using Liquid Homogenization Followed by Cold Press-Sintering [Volume 7, Issue 26, 2016, Pages 95-104]
  • Combination of strength and ductility Investigation of abnormal tensile behavior of DIN 16MnCr5 low carbon low alloy steel under ferrite-martensite dual-phase microstructures in comparison with full martensitic condition [Volume 11, Issue 41, 2021, Pages 17-34]
  • Combustion Synthesis Structure, Microstructure, Magnetic and Electromagnetic Properties Ni-Mn-Zn Ferrite Produced by Glycine-Nitrate Process [Volume 7, Issue 27, 2016, Pages 45-56]
  • Combustion Synthesis The application of combustion synthesis reactions in Ni-Ti system in the joining of steel to tungsten carbide [Volume 11, Issue 41, 2021, Pages 103-114]
  • Combustion Synthesis Effect of TiC and TiB2 Reinforcement Phase Addition on Mechanical and Tribological Properties of NiAl-TiC-TiB2 Composite Produced Through Combustion Synthesis Process [Volume 12, Issue 44, 2021, Pages 41-52]
  • Composite electrolyte Comparison of mechanical, electrical and chemical stability of BaCe0.7Zr0.1Y0.2O3-δ (BCZY7)-(Li/Na)2CO3 proton conductive composite electrolytes fabricated by mechanical mixing and infiltration methods [Volume 9, Issue 34, 2018, Pages 17-30]
  • Composite Materials The Effect of Fiber Breakage Caused by Transient Shear Stress Distribution in Single-Lap Adhesive Joint Composite Material [Volume 6, Issue 21, 2016, Pages 1-18]
  • Composite plate Cation Distribution, Structural Parameters and Magnetic Moment in the Spinel Structure of Li-Zn Ferrite Prepared by Glycine-Nitrate Process [Volume 4, Issue 16, 2014, Pages 43-56]
  • Composite؛ Porous؛ Cordierite؛ Silicon carbide Investigation of key Parameters on the Properties of Cordierite Bonded Porous SiC Composites Produced by Reaction-Bonding Method [Volume 4, Issue 16, 2014, Pages 57-70]
  • Compound casting The Study of the Effects Intermetallic Phases Formation on the Bond Strength and Electrical Resistivity of Al/Cu Bimetal produced by Compound Static Casting [Volume 7, Issue 27, 2016, Pages 27-44]
  • Compression Strength Investigating the effect of replacing CaO with CaF2 on bioactivity and compressive strength of 45S5 glass ceramic synthesized from soda-lime glass waste by solid state method [Volume 14, Issue 51, 2023, Pages 39-57]
  • Compression Test Prediction of Failure in Forming of Tantalum [Volume 4, Issue 15, 2014, Pages 29-38]
  • Compressive strength Investigation of Mechanical Properties of Al-Al2O3 Composites Synthesized By Spark Plasma Sintering [Volume 7, Issue 26, 2016, Pages 49-58]
  • Compressive strength The effect of carbon nano tubes on the compressive strength and flexural of epoxy honeycomb sandwich panels [Volume 10, Issue 35, 2019, Pages 49-62]
  • Compressive strength Investigating the behavior of compressive strength and abrasion resistance of the floor tile at different sintering temperatures [Volume 10, Issue 37, 2019, Pages 63-74]
  • Concrete Pipes Investigating the effect of using colors containing copper oxide and zinc oxide (zinc-rich) on microbial corrosion behavior of sewage pipes [Volume 10, Issue 35, 2019, Pages 15-26]
  • Conductive Polymer Composites The effect of carbon nanotube surface modification on conductivity behavior of carbon nanotube reinforced polythene matrix hybrid HDPE composite with segregate structure [Volume 13, Issue 49, 2022, Pages 57-71]
  • Conductive silver ink Synthesis and direct ink writing of silver ink for fabricating current collecting lines of dye sensitized solar cells [Volume 13, Issue 49, 2022, Pages 41-56]
  • Cone valves Effect of multi-pass friction stir processing on microstructure and mechanical properties of cast A216 alloy [Volume 12, Issue 46, 2021, Pages 33-48]
  • CoNiCrAlYSi Investigating the Cyclic Oxidation and Hot Corrosion of Nanostructured CoNiCrAlYSi Coatings Applied by HVOF Process [Volume 6, Issue 21, 2016, Pages 97-108]
  • Constitutive equations Modeling the hot deformation flow curves of API X65 pipeline steel using the exponential law equation [Volume 6, Issue 24, 2016, Pages 39-50]
  • Continuous cooling The finite element analysis of applying the controlling pouer on the surface transformation hardening in the vicinity of discontinuity in the workpiece depth [Volume 7, Issue 26, 2016, Pages 1-18]
  • Cooling Curve Effect of Cooling Rate and Grain Refining Agents on Microstructure Characteristics of Al-Cu Alloys by Computer- Aided Cooling Curve Method [Volume 6, Issue 23, 2016, Pages 75-88]
  • Cooling tower: Chemical control Microbial Corrosion in Cooling Water of Lushan Shahid Beheshti Power Plant [Volume 13, Issue 49, 2022, Pages 26-15]
  • Copolymer Synthesis and Characterization of Temperature‐Sensitive Hydrogel Copolymer Based on N-isopropylacrylamide for Medical Applications [Volume 7, Issue 27, 2016, Pages 15-26]
  • Copper Assessment of Aging Cycle for Coupering Its Aluminum Composite Foams with (A356-4% Cu) and A356 Foam Mechanical Behavior [Volume 6, Issue 21, 2016, Pages 37-52]
  • Copper Electrochemical Nucleation and Growth of Copper on Molybdenum Substrate: Effect of pH, Potential and Cleaning procedure [Volume 7, Issue 28, 2016, Pages 81-94]
  • Copper Effect of Strain Rate on the Hot Tensile Behavior of Invar Alloy Failure analysis of clogging caused by corrosion of copper pipes containing chloride gas in the presence of moisture (case study) [Volume 8, Issue 31, 2018, Pages 29-40]
  • Copper Investigating the role of electrode material and CTAB protective concentration in the synthesis of copper nanoparticles by electrochemical method [Volume 13, Issue 48, 2022, Pages 1-14]
  • Copper coating Studies the Effect of Time Sensitization and Activation Process and Electroless Bath Temperature on the Creation of Uniform Coating of Copper Metal on Boron Carbide Particles [Volume 4, Issue 16, 2014, Pages 13-20]
  • Copper Ions Removal Studying the Adsorption Behavior of Copper (II) Ions from Industrial Waste Water Solutions Using Corncob Particles [Volume 4, Vol.4/No.13/Autumn 2013, 2014, Pages 35-46]
  • Copper – tin oxide Synthesis of copper-tin metal oxide nanoparticles by the electrical explosion wire method and investigation antibacterial properties [Volume 8, Issue 32, 2018, Pages 125-136]
  • Copper Oxide dye Investigating the effect of using colors containing copper oxide and zinc oxide (zinc-rich) on microbial corrosion behavior of sewage pipes [Volume 10, Issue 35, 2019, Pages 15-26]
  • Copper sulfate An Investigation on the effect of adding copper sulfate on the properties and corrosion resistance of electroless nickel-phosphorus coating [Volume 6, Issue 24, 2016, Pages 1-12]
  • Co-precipitation Investigating the Effect of Co-Precipitation Synthesis Time of LiNi0.8Co0.15Al0.05O2 Cathode and Its Structural and Electrochemical Evaluation in Lithium-ion Battery [Volume 13, Issue 47, 2022, Pages 1-20]
  • Coprecipitation Methods The investigation of Structural and Magnetic Properties of Lanthanum and Barium Located into Multiferroic Ferrite Bismuth Nanoparticles in the Presence of Sugar Based Natural Surfactants Using Coprecipitation Approach [Volume 12, Issue 45, 2021, Pages 33-46]
  • Core–shell structure Synthesis of Fe3O4/SiO2/TiO2-Ag Core Shell Nanocomposites and Investigation of its Magnetic Properties [Volume 8, Issue 31, 2018, Pages 51-60]
  • Core-shell nanostructures Growth and investigation of magnetic and optical properties of Fe3O4@CuO core-shell nanostructures [Volume 9, Issue 34, 2018, Pages 155-164]
  • Corrosion An Investigation of Flow Accelerated(assisted) Erosion-Corrosion in High Pressure Economizer Tubes(HP-EC) of Boiler Unite 1 at Kerman Combined Cycle Power Plant [Volume 5, Issue 17, 2014, Pages 65-81]
  • Corrosion Inhibition of Copper Corrosion by Self-Assembled Thin Films of Schiff Bases in Acidic Media  [Volume 5, Issue 17, 2014, Pages 83-94]
  • Corrosion An Investigation on the effect of adding copper sulfate on the properties and corrosion resistance of electroless nickel-phosphorus coating [Volume 6, Issue 24, 2016, Pages 1-12]
  • Corrosion investigation the mechanism of the effect of clay nanoparticles on corrosion and wear resistance properties of epoxy nanocomposite coating applied to the surface of the carbon steel substrate [Volume 7, Issue 27, 2016, Pages 113-128]
  • Corrosion Effect of Strain Rate on the Hot Tensile Behavior of Invar Alloy Failure analysis of clogging caused by corrosion of copper pipes containing chloride gas in the presence of moisture (case study) [Volume 8, Issue 31, 2018, Pages 29-40]
  • Corrosion Effects of the Replacement Vanadium to Niobium at E347-16 Electrode on Micro-structure and Corrosion Behaviors of Weld Metal [Volume 11, Issue 39, 2021, Pages 31-42]
  • Corrosion THE EFFECT OF MICROSTRUCTURAL CHANGES ON THE CORROSION PROPERTIES OF 310S AUSTENITIC STAINLESS STEEL AFTER THERMOMECHANICAL TREATMENT [Volume 13, Issue 47, 2022, Pages 21-38]
  • Corrosion Fatigue Life Effect of Ultrasonic Impact Treatment on Fatigue Behavior of Steel Welded Pipes in Petrochemical Corrosive Environment [Volume 6, Issue 21, 2016, Pages 83-96]
  • Corrosion Inhibitor A detailed DOE study on temperature, concentration and their interactions on corrosion protection of carbon steel [Volume 12, Issue 45, 2021, Pages 77-94]
  • Corrosion monitoring Detection and Analysis of Microbial Influenced Corrosion in Cooling Tower of Shahid Mofateh Power Plant [Volume 13, Issue 50, 2022, Pages 46-59]
  • Corrosion prevention Detection and Analysis of Microbial Influenced Corrosion in Cooling Tower of Shahid Mofateh Power Plant [Volume 13, Issue 50, 2022, Pages 46-59]
  • Corrosion properties Applying Titania and Hydroxyapatite coating on Ti-6Al-4V by PEO and hydrothermal processes and investigating its corrosion behavior in simulated body environment [Volume 1, Issue 1, , Pages 1-10]
  • Corrosion properties Characterization of mechanical and corrosion behaviour of multilayered Cu/Al/Al2O3 nano-composite produced by ARB process [Volume 7, Issue 28, 2016, Pages 149-162]
  • Corrosion Rate Investigating the Effects of Heat Input on Corrosion Rate of Joint of Duplex Stainless Steel 2205 Weldments by GTAW Process [Volume 5, Issue 17, 2014, Pages 95-110]
  • Corrosion Rate Investigation of corrosion behavior nanocrystalline Nickel-Cobalt coating by electrodeposition [Volume 1, Issue 1, , Pages 51-60]
  • Corrosion Resistance A Study on the Effect of Mechanical Activating of Plain Carbon Steel Surface on the Protection Properties of Applied Zinc Phosphate Coating and Paint Adhesion Improvement [Volume 4, Issue 15, 2014, Pages 51-66]
  • Corrosion Resistance Investigation of Zinc metallic coating properties formed on low carbon steel in alkaline and sulfate electrolytes by plasma electrolytic saturation [Volume 6, Issue 23, 2016, Pages 1-18]
  • Corrosion Resistance Investigation on Effect of Aluminum on the Corrosion Resistance of Hadfield Austenitic Manganese Steel [Volume 7, Issue 27, 2016, Pages 1-14]
  • Corrosion Resistance The influence of two types of nano-structured Ni-P and zinc-phosphate primer on the corrosion resistance of painted low carbon steel [Volume 10, Issue 36, 2019, Pages 33-50]
  • Corrosion Resistance Investigation of the Synergistic Effect of Soft and Hard Particles on Corrosion and Wear Resistance Behavior of Ni-B-PTFE-Si3N4 Electroless Coating on Carbon Steel [Volume 12, Issue 43, 2021, Pages 1-22]
  • Corrosion Resistance Investigation of corrosion resistance of Ti-6Al-4V alloy welding zone Welded by TIG method [Volume 12, Issue 44, 2021, Pages 1-12]
  • Corrosion Resistance Investigating the effect of silicon content on structure and corrosion resistance by plasma electrolytic oxidation on aluminum-silicon alloys [Volume 14, Issue 53, 2023, Pages 21-34]
  • Corrosion Resistance Comparison of properties of zinc, zinc/nickel, zinc/nickel/manganese phosphate coatings on 41Cr4 steel substrate [Volume 14, Issue 53, 2023, Pages 53-68]
  • Cosmetics Biosynthesis of silver nanopowders and evaluation on their application in cosmetic products [Volume 8, Issue 29, 2018, Pages 69-80]
  • Creep Experimental Study on Creep Behavior of Al2024/SiC Composite Produced via Accumulative Roll Bonding (ARB) Process [Volume 8, Issue 31, 2018, Pages 153-166]
  • Creep mechanism Indentation creep behavior of AZ61-0.7Si-xCa magnesium alloys [Volume 10, Issue 35, 2019, Pages 1-14]
  • Critical Temperature The effect of temperature on microstructure during ultra-rapid annealing of severely deformed low-carbon steel [Volume 11, Issue 40, 2021, Pages 1-12]
  • CrNiAl Effect of mechanical alloying and heat treatment process on the phase transformation of Ni-Cr-Al powders mixture [Volume 1, Issue 1, , Pages 31-40]
  • Cryo Milling Investigating the Cyclic Oxidation and Hot Corrosion of Nanostructured CoNiCrAlYSi Coatings Applied by HVOF Process [Volume 6, Issue 21, 2016, Pages 97-108]
  • Crystallization Investigation on Effect of Crystallization Step in Antimony Recovery Using Hydrometallurgical Method in Alkaline Sulphide Solutions [Volume 10, Issue 38, 2019, Pages 79-94]
  • Crystallization kinetics Investigation of crystallization kinetics of Co-Fe-Ta-Hf-B melt-spun glassy ribbon with a high thermal stability under isochronal condition [Volume 8, Issue 32, 2018, Pages 169-182]
  • Crystal structure Synthesis of Different Nanostructured Morphologies of Cadmium Selenide by Changing the Solvent in Solvothermal Process. [Volume 4, Issue 14, 2014, Pages 93-102]
  • Crystal structure Synthesizing, characterizing and investigating the crystal structural, electric and magnetic properties of superconducting compound Y2Ba5Cu7Ox [Volume 10, Issue 37, 2019, Pages 163-176]
  • CTAB Investigating the role of electrode material and CTAB protective concentration in the synthesis of copper nanoparticles by electrochemical method [Volume 13, Issue 48, 2022, Pages 1-14]
  • Cu28Zn alloy Modeling and investigation of the effect of supersolidus liquid phase sintering variables on physical properties and Mechanics of Cu28Zn alloy [Volume 4, Issue 11, 2014, Pages 1-20]
  • Cu-Al2O3 composites, tubes, Alumina particles, corrosion resistance Fabrication of Cu-Al2O3 composite tubes through electroforming process and investigation on the effect of alumina particles on corrosion resistance of the tubes [Volume 11, Issue 41, 2021, Pages 63-78]
  • Cu/Al/Al2O3 Nano-composite Characterization of mechanical and corrosion behaviour of multilayered Cu/Al/Al2O3 nano-composite produced by ARB process [Volume 7, Issue 28, 2016, Pages 149-162]
  • CuO Growth and investigation of magnetic and optical properties of Fe3O4@CuO core-shell nanostructures [Volume 9, Issue 34, 2018, Pages 155-164]
  • Cu Powder and Ni Ball Evaluation of Milling Time and Balls Diameters during Surface Mechanical Coating (SMC) in the Presence of Copper Powder and Nickel Balls [Volume 7, Issue 27, 2016, Pages 67-84]
  • Current collecting lines Synthesis and direct ink writing of silver ink for fabricating current collecting lines of dye sensitized solar cells [Volume 13, Issue 49, 2022, Pages 41-56]
  • Current Efficiency Investigation on Effect of Crystallization Step in Antimony Recovery Using Hydrometallurgical Method in Alkaline Sulphide Solutions [Volume 10, Issue 38, 2019, Pages 79-94]
  • Curvature of slip lines Investigation of the reduction in area and twist angle effects on the strain distribution, damage and process load of vortex extrusion die [Volume 11, Issue 42, 2021, Pages 95-106]
  • Cutting forces Production of machinable ferritic-ausferritic ADI by selection of proper partially austenitizing time [Volume 10, Issue 36, 2019, Pages 93-106]
  • Cysteine synthesis and Identification of superparamagnetic graphene oxide- Iron oxide nanoparticles coated by chitosan and modified by Amino acid [Volume 9, Issue 34, 2018, Pages 61-76]

D

  • Damage Investigation of the reduction in area and twist angle effects on the strain distribution, damage and process load of vortex extrusion die [Volume 11, Issue 42, 2021, Pages 95-106]
  • DAZ Effect of bonding time and temperature on microstructure of GTD-111/ BNi-3 /GTD-111 system during the Transient Liquid Phase (TLP) [Volume 11, Issue 39, 2021, Pages 91-108]
  • Deep Cryogenic Treatment The effect of deep cryogenic treatment on the hardness and wear behavior of Din 1.2344 tool steel [Volume 7, Issue 26, 2016, Pages 105-118]
  • DEFORM2D Investigation of effective parameters in the sandwich and conventional rolling process of the thin steel sheet using the finite element method [Volume 6, Issue 24, 2016, Pages 77-94]
  • DEFORM-3D Influence of Process Parameters on Hot Backward Extrusion of Al 6061 alloy [Volume 8, Issue 30, 2018, Pages 153-162]
  • Dehydration Fabrication and characterization of developed polysulfone hollow fiber membranes for dehydration of gas streams via gas-liquid membrane contactor [Volume 11, Issue 40, 2021, Pages 45-58]
  • Dendrites improvement of mechanical properties and hot cracking susceptibility of 304 stainless steel weld joints with the simultaneous electromagnetic vibration application [Volume 9, Issue 33, 2018, Pages 137-148]
  • Densification Investigating the behavior of compressive strength and abrasion resistance of the floor tile at different sintering temperatures [Volume 10, Issue 37, 2019, Pages 63-74]
  • Density Optimization of parameters for tape casting of yttria stabilized zirconia (YSZ8) by Taguchi design for electrolyte solid oxide fuel cell [Volume 7, Issue 28, 2016, Pages 47-56]
  • Deposition of Alumina Comparison of oxygen and nitrogen plasmas for production of nano-composite layers of alumina and aluminium [Volume 7, Issue 27, 2016, Pages 57-66]
  • Deposition of Aluminum Comparison of oxygen and nitrogen plasmas for production of nano-composite layers of alumina and aluminium [Volume 7, Issue 27, 2016, Pages 57-66]
  • Deree of Diution Investigating the effect of degree of dilution and interlayer on the abrasion resistance of the hard-wired coated layer of Fe-Cr-C based on SMAW method on plane carbon steel [Volume 11, Issue 40, 2021, Pages 133-32]
  • Dielectric parameters The effect of manganese impurity on the interlayer Al/PVP:CdS/P-Si Schottky structure and its dielectric properties [Volume 12, Issue 43, 2021, Pages 23-35]
  • Diffusion bonding Diffusion Bonded Alumina Bodies Using Hydride Nanopowders Interlayers and Structural Investigation of Joint Interface [Volume 5, Issue 17, 2014, Pages 1-14]
  • Diffusion bonding The effect of titanium interlayer on the mechanical and structural properties of steel- tungsten diffusion bonding [Volume 8, Issue 30, 2018, Pages 105-116]
  • Dilatometery Study of Phase Transformation in Martensitic Stainless Steel AISI 422 During Continuous Cooling [Volume 6, Issue 22, 2016, Pages 79-90]
  • Dip coating Synthesis and Study of Properties of Bioactive Glass (45S)/TiO2/Fluorapatite Nanocomposite [Volume 8, Issue 32, 2018, Pages 73-96]
  • Direct ink writing Synthesis and direct ink writing of silver ink for fabricating current collecting lines of dye sensitized solar cells [Volume 13, Issue 49, 2022, Pages 41-56]
  • Dislocation Microstructural Characterization and Damage Mechanism of the First Stage Blade GE MS9001 After Long-term Exposure [Volume 14, Issue 51, 2023, Pages 58-69]
  • Drilling Enzyme absorption rate of sandwich panels with aluminum foam core under the sky of drilling [Volume 3, Issue 10, , Pages 25-38]
  • Drilling The Experimental and Numerical Evaluation of the Residual Stress in the Hot Forming Sheet Process for 5083 Aluminum via the Gas Blowing Process [Volume 7, Issue 25, 2016, Pages 13-22]
  • DSC Effect of Milling Speed on Fabrication Al2O3-ZrB2 in Situ Nano-Composite Powder Via Mechanochemical Synthesis [Volume 4, Issue 15, 2014, Pages 39-50]
  • Dual matrix structure The Effects of Heat Treatment Parameters on the Microstructures of Aluminium Ductile Cast Iron [Volume 4, Issue 14, 2014, Pages 67-78]
  • Dual matrix structure Production of machinable ferritic-ausferritic ADI by selection of proper partially austenitizing time [Volume 10, Issue 36, 2019, Pages 93-106]
  • Dual phase ferritic-bainitic microstructures Investigation of abnormal effect of dual-phase ferritic-bainitic microstructures on modification of mechanical properties of MO40 low alloy steel in comparison with full bainitic conditions [Volume 10, Issue 37, 2019, Pages 133-148]
  • Duplex stainless steel Investigating the Effects of Heat Input on Corrosion Rate of Joint of Duplex Stainless Steel 2205 Weldments by GTAW Process [Volume 5, Issue 17, 2014, Pages 95-110]
  • Duplex stainless steel Influence of filler metal on the microstructure of dissimilar welds between UNS S32205 duplex stainless steel and ASTM A517 Quench and tempered steel [Volume 8, Issue 30, 2018, Pages 125-138]
  • Dye sensitized solar cells Investigation of electrophoretic parameters of TiO2 nanoparticles for fabricating photoanode of dye sensitized solar cells [Volume 9, Issue 33, 2018, Pages 13-24]
  • Dynamic precipitation Investigation of gamma precipitation process under effect of strain in Nimonic80A nickel base superalloy [Volume 12, Issue 43, 2021, Pages 36-55]

E

  • ECAP Effect of the power type of the general flow function in texture simulation of ECAP [Volume 12, Issue 44, 2021, Pages 13-28]
  • ECAP and MDF processes Effects of severe plastic deformation on mechanical properties, electrical conductivity and microstructure of Al-7075 alloy [Volume 8, Issue 30, 2018, Pages 73-86]
  • EDS analysis Producing WC-Co coating with electrolytic plasma processing on low carbon steel and investigation its wear resistance [Volume 7, Issue 28, 2016, Pages 57-66]
  • Effects of Defect Studying mechanical behavior of non-wrinkled phosphorene nanotubes under uniaxial loading [Volume 8, Issue 30, 2018, Pages 117-124]
  • EIS Evaluation of anti-corrosion properties of MIO pigments in the formulation of synthetic rubber based primer used in gas pipeline [Volume 8, Issue 29, 2018, Pages 109-120]
  • EIS Evaluation of corrosion inhibition effect of hybrid organic Ziziphus spina-christi leaf extract and zinc sulfate corrosion inhibitor on mild steel in saline solutions [Volume 13, Issue 47, 2022, Pages 53-70]
  • Electrical Conductivity Effects of severe plastic deformation on mechanical properties, electrical conductivity and microstructure of Al-7075 alloy [Volume 8, Issue 30, 2018, Pages 73-86]
  • Electrical Conductivity Synthesizing and investigation on the electrochemical behavior of (Nd0.9La0.1)1.95Sr0.05Ni0.75Cu0.25O4-d and (Nd0.9La0.1)1.9Sr0.1Ni0.75Cu0.25O4-d cathode electrode for solid oxide fuel cell [Volume 9, Issue 33, 2018, Pages 1-12]
  • Electrical Conductivity The effect of manganese impurity on the interlayer Al/PVP:CdS/P-Si Schottky structure and its dielectric properties [Volume 12, Issue 43, 2021, Pages 23-35]
  • Electrical conductivity EMI Shielding The effect of carbon nanotube surface modification on conductivity behavior of carbon nanotube reinforced polythene matrix hybrid HDPE composite with segregate structure [Volume 13, Issue 49, 2022, Pages 57-71]
  • Electrical explosion of wire Synthesis of copper-tin metal oxide nanoparticles by the electrical explosion wire method and investigation antibacterial properties [Volume 8, Issue 32, 2018, Pages 125-136]
  • Electrical properties Synthesis and characterization of copper based spinel coating on alumina substrate for spark plug aero-engine application [Volume 12, Issue 45, 2021, Pages 65-76]
  • Electrochemical Investigating the Effect of Co-Precipitation Synthesis Time of LiNi0.8Co0.15Al0.05O2 Cathode and Its Structural and Electrochemical Evaluation in Lithium-ion Battery [Volume 13, Issue 47, 2022, Pages 1-20]
  • Electrochemical behavior Synthesis and Characterization of Nanoparticles of Magnesium-Copper Oxide with Paramagnetic Properties [Volume 8, Issue 30, 2018, Pages 163-172]
  • Electrochemical deposition Electrochemical deposition of calcium phosphate coating on the Ti-10Mo-X (TiC & TiB2) composite produced by spark plasma sintering [Volume 13, Issue 48, 2022, Pages 33-52]
  • Electrochemical Impedance Spectroscopy Investigation on Effect of Aluminum on the Corrosion Resistance of Hadfield Austenitic Manganese Steel [Volume 7, Issue 27, 2016, Pages 1-14]
  • Electrochemical Impedance Spectroscopy Evaluation of Metoral pill as an effective and novel inhibitor for corrosion of mild steel in acidic media [Volume 9, Issue 34, 2018, Pages 133-146]
  • Electrochemical measurements A detailed DOE study on temperature, concentration and their interactions on corrosion protection of carbon steel [Volume 12, Issue 45, 2021, Pages 77-94]
  • Electrochemistry Synthesis of nickel-cobalt-aluminum/graphene nanocomposite and its electrochemical performance as supercapacitor [Volume 11, Issue 42, 2021, Pages 63-80]
  • Electrode E347 Effects of the Replacement Vanadium to Niobium at E347-16 Electrode on Micro-structure and Corrosion Behaviors of Weld Metal [Volume 11, Issue 39, 2021, Pages 31-42]
  • Electrodeposition Fabrication, Structural Characterization and Magnetic Properties of Nanostructure Fe-Co-W Coatings Prepared by Electrodeposition [Volume 7, Issue 25, 2016, Pages 31-44]
  • Electrodeposition Electrochemical Nucleation and Growth of Copper on Molybdenum Substrate: Effect of pH, Potential and Cleaning procedure [Volume 7, Issue 28, 2016, Pages 81-94]
  • Electrodeposition Investigation the effect of In-doping on the structural and optical properties of electrodeposited SnS thin film [Volume 8, Issue 32, 2018, Pages 43-56]
  • Electrodeposition current density A comparative study on the effect of electrodeposition current density on the grain size of Ni and Ni-W nanocrystalline coatings [Volume 11, Issue 40, 2021, Pages 33-44]
  • Electroforming Fabrication of Cu-Al2O3 composite tubes through electroforming process and investigation on the effect of alumina particles on corrosion resistance of the tubes [Volume 11, Issue 41, 2021, Pages 63-78]
  • Electrolesscoating Studies the Effect of Time Sensitization and Activation Process and Electroless Bath Temperature on the Creation of Uniform Coating of Copper Metal on Boron Carbide Particles [Volume 4, Issue 16, 2014, Pages 13-20]
  • Electroless Ni-B coating Investigation of the Synergistic Effect of Soft and Hard Particles on Corrosion and Wear Resistance Behavior of Ni-B-PTFE-Si3N4 Electroless Coating on Carbon Steel [Volume 12, Issue 43, 2021, Pages 1-22]
  • Electroless nickel-phosphorus An Investigation on the effect of adding copper sulfate on the properties and corrosion resistance of electroless nickel-phosphorus coating [Volume 6, Issue 24, 2016, Pages 1-12]
  • Electroless-plating Production of Open Cell Copper Foam and assessment of foam Substructure [Volume 8, Issue 31, 2018, Pages 1-16]
  • Electroless-plating Production of Open Cell Copper Foam and assessment of foam Substructure [Volume 8, Issue 31, 2018, Pages 179-191]
  • Electrolyte Optimization of parameters for tape casting of yttria stabilized zirconia (YSZ8) by Taguchi design for electrolyte solid oxide fuel cell [Volume 7, Issue 28, 2016, Pages 47-56]
  • Electrolyte Investigating the role of electrode material and CTAB protective concentration in the synthesis of copper nanoparticles by electrochemical method [Volume 13, Issue 48, 2022, Pages 1-14]
  • Electrolytic plasma oxidation Application of the response surface method to optimize the chemical composition and hardness of the aluminum oxide coating created by the electrolytic plasma method [Volume 10, Issue 36, 2019, Pages 69-82]
  • Electromagnetic Interference Shielding Investigation and comparison of electromagnetic properties of epoxy-graphene and epoxy-carbon nanotube nanocomposites [Volume 7, Issue 26, 2016, Pages 85-94]
  • Electromagnetic waves absorption Synthesis of FeCo alloyed nanoparticles with different weight ratios via microemulsion route and studying the magnetic properties [Volume 11, Issue 42, 2021, Pages 45-62]
  • Electrophoretic deposition Fabrication of solid oxide fuel cell (SOFC) anodes by electrophoretic deposition of NiO-YSZ composite powder [Volume 1, Issue 1, , Pages 61-70]
  • Electrophoretic deposition Investigation of electrophoretic parameters of TiO2 nanoparticles for fabricating photoanode of dye sensitized solar cells [Volume 9, Issue 33, 2018, Pages 13-24]
  • Electroplating The formation process of nanocrystalline permalloy by electroplating and optimization the surface conditions for alloy coatings [Volume 6, Issue 23, 2016, Pages 89-100]
  • Electroplating Production of composite coating of hard chrome – nano alumina by electroplating from the bath of hexa valence chrome and the study of the hardness and abrasive properties [Volume 8, Issue 30, 2018, Pages 45-58]
  • Electroplating Production of Open Cell Copper Foam and assessment of foam Substructure [Volume 8, Issue 31, 2018, Pages 1-16]
  • Electroplating Production of Open Cell Copper Foam and assessment of foam Substructure [Volume 8, Issue 31, 2018, Pages 179-191]
  • Electroplating Preparation and evaluation of mechanical behavior of nanostructure Ni-P/Al2O3-SiC composite coating [Volume 11, Issue 39, 2021, Pages 109-120]
  • Electropolymerization The gravimetric,, impedance, and morphology study of pyrrole-formylpyrrole copolymer synthesized by electro-polymerization [Volume 12, Issue 46, 2021, Pages 49-58]
  • Electrospinning Investigation of Morphology and production efficiency of Produced Nano-Fibers with multi-nozzle electrospinning process [Volume 9, Issue 33, 2018, Pages 97-112]
  • Electrospinning An Investigation on the Effect of Barium Titanate Nanoparticles on the Properties of Electrospun PVDF Fibers [Volume 13, Issue 47, 2022, Pages 39-52]
  • Electrostatic adsorption Synthesis and characterization of bio-nanocomposite of FeOOH-AC and its application in the removal of methyl orange anionic dye [Volume 14, Issue 53, 2023, Pages 69-90]
  • Electrowining Investigation on Effect of Crystallization Step in Antimony Recovery Using Hydrometallurgical Method in Alkaline Sulphide Solutions [Volume 10, Issue 38, 2019, Pages 79-94]
  • Elephant foot Gravitational Effects on Compact Shaping and Microstructure during Supersolidus Liquid Phase Sintering of Cu-10Sn-10Pb [Volume 6, Issue 23, 2016, Pages 127-138]
  • Energy Absorption Investigation and Simulation of Quasi-Static Perforation Test on Sandwich Panels with Al A356/SiCp Composite Foam Core [Volume 6, Issue 22, 2016, Pages 13-28]
  • Epoxy Investigation and comparison of electromagnetic properties of epoxy-graphene and epoxy-carbon nanotube nanocomposites [Volume 7, Issue 26, 2016, Pages 85-94]
  • Epoxy matrix composite Flexural Properties of Epoxy Matrix Composites Reinforced by Milled Fibers [Volume 6, Issue 23, 2016, Pages 47-60]
  • Epoxy matrix composite Investigating the Tribological Behavior of Epoxy Matrix Composites Reinforced by Milled Fibers [Volume 6, Issue 24, 2016, Pages 51-62]
  • Epoxy Sandwich Panels The effect of carbon nano tubes on the compressive strength and flexural of epoxy honeycomb sandwich panels [Volume 10, Issue 35, 2019, Pages 49-62]
  • Erichsen Test Prediction of Failure in Forming of Tantalum [Volume 4, Issue 15, 2014, Pages 29-38]
  • Exfoliation Corrosion A New Method to Investigate Localized Corrosion on 2024, 7075 and 6061 Aluminium Alloys in the Sea-Like Atmosphere Environments [Volume 4, Vol.4/No.13/Autumn 2013, 2014, Pages 69-82]
  • Exhaust Manifold Root Cause Analysis of Water-Cooled Exhaust Manifold in High Speed Marine Diesel Engine [Volume 11, Issue 42, 2021, Pages 1-16]
  • Exothermic process Study of Amitriptyline drug adsorption on multi walled carbon nanotube (MWCNT) [Volume 12, Issue 43, 2021, Pages 70-81]
  • Exothermic reaction The application of combustion synthesis reactions in Ni-Ti system in the joining of steel to tungsten carbide [Volume 11, Issue 41, 2021, Pages 103-114]
  • Explosive welding Investigating the Effects of Heat Treatment in the Microstructure and Metallurgical Properties of the Explosive Welding of 304 Stainless Steel and CK45 Carbon Steel [Volume 7, Issue 26, 2016, Pages 19-34]
  • Exponential equation Modeling the hot deformation flow curves of API X65 pipeline steel using the exponential law equation [Volume 6, Issue 24, 2016, Pages 39-50]
  • Extrusion Application of the combination of extrusion and equal channel angular pressing for processing fine grained and nanostructured metallic materials [Volume 10, Issue 38, 2019, Pages 17-32]
  • Eyring model Investigation of the Effect of Strain Rate on Tensile Properties of Polyurethane Using Eyring Model [Volume 7, Issue 25, 2016, Pages 23-30]

F

  • Factsage Thermodynamic Analysis of Pressureless Sintering of B4C-Si Nano Composite by Factsage Software [Volume 4, Issue 15, 2014, Pages 79-90]
  • Failure assessment diagram(FAD) Analysis of Hydrogen-Induced Cracking and Lamination in a Pipeline Steel Based on Fitness-For-Service Assessment [Volume 13, Issue 48, 2022, Pages 14-32]
  • Fatigue Investigation Corrosion Fatigue Behaviours of 7075-T6 Aluminum Alloy in Sea Waterr [Volume 8, Issue 29, 2018, Pages 1-12]
  • Fatigue Study of PEO on the fatigue behavior of titanium alloy Ti-6Al-4V [Volume 8, Issue 31, 2018, Pages 141-152]
  • FCAW Study of Microstructure and Mechanical properties of Welded mild steel fabricated by FCAW and Compare with GMAW Process [Volume 8, Issue 30, 2018, Pages 1-14]
  • Fe3Al The effect of Si addition on microstructure and tribological properties of Fe-Al claddings produced by GTAW process [Volume 10, Issue 37, 2019, Pages 149-162]
  • Fe3O4 Growth and investigation of magnetic and optical properties of Fe3O4@CuO core-shell nanostructures [Volume 9, Issue 34, 2018, Pages 155-164]
  • Fe-B alloy Optimizing Parameters for Chemical Synthesis of Fe-B Alloy Nanoparticles by Taguchi Method [Volume 4, Issue 15, 2014, Pages 21-28]
  • Fe-base amorphous alloys Effect of milling time and investigation of thermodynamic analysis on amorphous phase formation in Fe-C-Ta alloy prepared by mechanical alloying [Volume 8, Issue 31, 2018, Pages 107-122]
  • Fe-based amorphous alloys Effect of PCA addition on microstructural and magnetic Properties a new Fe-based amorphous alloy prepared by Mechanical Alloying [Volume 9, Issue 34, 2018, Pages 45-60]
  • Fe-Co thin film The Effect of Co Concentration on the Magnetic Properties of Obliquely Sputtered Fe–Co Thin Films [Volume 11, Issue 41, 2021, Pages 91-102]
  • Fe-Co thin film The Effect of Oblique Deposition on the Magnetic Behavior of Fe-Co Alloy Thin Films Fabricated by Sputtering Technique [Volume 11, Issue 42, 2021, Pages 31-44]
  • Fe−Co−W Fabrication, Structural Characterization and Magnetic Properties of Nanostructure Fe-Co-W Coatings Prepared by Electrodeposition [Volume 7, Issue 25, 2016, Pages 31-44]
  • Ferrite Bismite The investigation of Structural and Magnetic Properties of Lanthanum and Barium Located into Multiferroic Ferrite Bismuth Nanoparticles in the Presence of Sugar Based Natural Surfactants Using Coprecipitation Approach [Volume 12, Issue 45, 2021, Pages 33-46]
  • Ferrite Circulators Study of Microstructure and Mechanical properties of Welded mild steel fabricated by FCAW and Compare with GMAW Process [Volume 8, Issue 30, 2018, Pages 1-14]
  • Ferrite-martensite dual-phase microstructure Investigation of abnormal tensile behavior of DIN 16MnCr5 low carbon low alloy steel under ferrite-martensite dual-phase microstructures in comparison with full martensitic condition [Volume 11, Issue 41, 2021, Pages 17-34]
  • Ferritic-Martensitic The Effects of Heat Treatment Parameters on the Microstructures of Aluminium Ductile Cast Iron [Volume 4, Issue 14, 2014, Pages 67-78]
  • Ferritic-pearlitic bonding Investigating the effect of banding on the impact resistance behavior of microalloy steel used in pipelines [Volume 3, Issue 10, , Pages 57-66]
  • Ferromagnetic resonance frequency The Effect of Co Concentration on the Magnetic Properties of Obliquely Sputtered Fe–Co Thin Films [Volume 11, Issue 41, 2021, Pages 91-102]
  • Ferromagnetic resonance frequency The Effect of Oblique Deposition on the Magnetic Behavior of Fe-Co Alloy Thin Films Fabricated by Sputtering Technique [Volume 11, Issue 42, 2021, Pages 31-44]
  • Fibers The Effect of Fiber Breakage Caused by Transient Shear Stress Distribution in Single-Lap Adhesive Joint Composite Material [Volume 6, Issue 21, 2016, Pages 1-18]
  • Fibrous Composites Statistical Micromechanical Analysis of the Effects of Fiber Random Distribution on the Mechanical Properties of Fibrous Composites [Volume 6, Issue 21, 2016, Pages 137-160]
  • Film Boiling Root Cause Analysis of Water-Cooled Exhaust Manifold in High Speed Marine Diesel Engine [Volume 11, Issue 42, 2021, Pages 1-16]
  • Film swface deformation Study of Scratch Resistance of Polyethylene and its Composite Reinforced with Nano-Sized Calcium Carbonate [Volume 4, Issue 14, 2014, Pages 79-92]
  • Fine Grain Size Structure A Study on the Effect of Mechanical Activating of Plain Carbon Steel Surface on the Protection Properties of Applied Zinc Phosphate Coating and Paint Adhesion Improvement [Volume 4, Issue 15, 2014, Pages 51-66]
  • Finite Element Investigation of effective parameters in the sandwich and conventional rolling process of the thin steel sheet using the finite element method [Volume 6, Issue 24, 2016, Pages 77-94]
  • Finite Element The Experimental and Numerical Evaluation of the Residual Stress in the Hot Forming Sheet Process for 5083 Aluminum via the Gas Blowing Process [Volume 7, Issue 25, 2016, Pages 13-22]
  • Finite element analysis Investigation and Simulation of Quasi-Static Perforation Test on Sandwich Panels with Al A356/SiCp Composite Foam Core [Volume 6, Issue 22, 2016, Pages 13-28]
  • Finite element analysis The finite element analysis of applying the controlling pouer on the surface transformation hardening in the vicinity of discontinuity in the workpiece depth [Volume 7, Issue 26, 2016, Pages 1-18]
  • Finite element method Influence of Process Parameters on Hot Backward Extrusion of Al 6061 alloy [Volume 8, Issue 30, 2018, Pages 153-162]
  • Finite element method Root causes analyzed of leakage on the tank bottom using simulation cathodic protection [Volume 10, Issue 36, 2019, Pages 117-132]
  • Finite element method Experimental and finite element analysis of hot backward extrusion process of vanadium microalloyed steel preform for determining optimum preheat temperature [Volume 10, Issue 36, 2019, Pages 157-172]
  • Finned Tube Investigation of High Frequency Resistance Welding (HFRW) Variables on microstructure and mechanical properties of dissimilar joints between chromium-molybdenum low alloy steel tubes to chromium high alloy steels [Volume 11, Issue 39, 2021, Pages 1-15]
  • Fitness-for-Service (FFS)assessment Analysis of Hydrogen-Induced Cracking and Lamination in a Pipeline Steel Based on Fitness-For-Service Assessment [Volume 13, Issue 48, 2022, Pages 14-32]
  • Fitting Stress and Fracture Analysis of a Fitting in Slug Catcher of Gas Refinery [Volume 7, Issue 27, 2016, Pages 95-112]
  • FLD Prediction of Failure in Forming of Tantalum [Volume 4, Issue 15, 2014, Pages 29-38]
  • Flexural Strength Investigating the Rheological Behavior of Silicon Carbide Gel Casting Suspensions and its Effect on the Silicon Carbide Bodies [Volume 10, Issue 35, 2019, Pages 77-88]
  • Flexural Strength The effect of carbon nano tubes on the compressive strength and flexural of epoxy honeycomb sandwich panels [Volume 10, Issue 35, 2019, Pages 49-62]
  • Flexural Strength Investigating the effect of CaO/MgO ratio on the structure and final properties of wall tile bodies in rapid firing using Zanjan talc and Abbas Abad calcium carbonate as primary sources [Volume 13, Issue 49, 2022, Pages 27-40]
  • Flexural Strength Investigating the effect of CaO/MgO ratio on the structure and final properties of wall tile bodies in rapid firing using the primary sources of Borujerd talc and Abbas Abad calcium carbonate as primary sources [Volume 13, Issue 50, 2022, Pages 1-18]
  • Flexural Strength Investigating the effect of different sources of magnesium oxide on the structure and final properties of wall tile bodies containing CaO using rapid firing method [Volume 14, Issue 51, 2023, Pages 17-38]
  • Floor tile Investigating the behavior of compressive strength and abrasion resistance of the floor tile at different sintering temperatures [Volume 10, Issue 37, 2019, Pages 63-74]
  • Fluidity The Use of Hot Stage Microscope to Analysis the Fluidity of High Speed Mold Powders in Continuous Casting of Steel [Volume 4, Issue 14, 2014, Pages 1-10]
  • Fluorapatite Synthesis and Study of Properties of Bioactive Glass (45S)/TiO2/Fluorapatite Nanocomposite [Volume 8, Issue 32, 2018, Pages 73-96]
  • Formaldehyde Gas Effect of Various Heat Treatment Conditions on Nickel Ferrite Nanoparticles and Investigating its Sensitivity to Formaldehyde [Volume 11, Issue 42, 2021, Pages 17-30]
  • Formation water flooding Laboratory investigation of using a ternary polymer of itaconic acid-sodium polystyrene sulfonate-acrylamide as an inhibitor for calcium carbonate scaling in formation water [Volume 14, Issue 51, 2023, Pages 89-101]
  • Forming The Experimental and Numerical Evaluation of the Residual Stress in the Hot Forming Sheet Process for 5083 Aluminum via the Gas Blowing Process [Volume 7, Issue 25, 2016, Pages 13-22]
  • Fracture Analysis Stress and Fracture Analysis of a Fitting in Slug Catcher of Gas Refinery [Volume 7, Issue 27, 2016, Pages 95-112]
  • Fracture energy Fracture Resistance Improvement of Micro Alloy Steel Weld in Four Wire Submerged Arc Welding by applying One and Two Thermal Cycles [Volume 6, Issue 23, 2016, Pages 115-126]
  • Fracture mode Effect of the shoulder size and dwell time on the static Strength and fracture mode of projection friction stir spot welded 2024 aluminum alloy [Volume 8, Issue 32, 2018, Pages 13-30]
  • Fracture Surfaces Effect Of Quenching and Tempering Temperature on the Fracture Quality of GS-45CrNiMo4-2 Steel, Through the Quench-Temper Heat Treatment Cycle [Volume 9, Issue 34, 2018, Pages 77-92]
  • Friction stir processing (FSP) Investigation of microstructure and hardness of surface composite AA5086(H116)/ZrO2 and surface hybrid composite AA5086(H116)/ZrO2/Gr fabricated by friction stir processing [Volume 6, Issue 23, 2016, Pages 101-114]
  • Friction stir processing (FSP) Investigation of microstructure and wear resistance of AZ31B/SiO2/graphite hybrid surface composite produced by friction stir processing (FSP) [Volume 10, Issue 37, 2019, Pages 47-62]
  • Friction stir spot welding Effect of the shoulder size and dwell time on the static Strength and fracture mode of projection friction stir spot welded 2024 aluminum alloy [Volume 8, Issue 32, 2018, Pages 13-30]
  • Friction stir spot welding.Microstructure protrusion friction stir spot welding: the microstructure and mechanical properties of Al 6061 alloy [Volume 10, Issue 36, 2019, Pages 51-68]
  • Friction Stir Welding Fabrication of Aluminum Foam by ARB and Investigation on Its Friction Stir Welded Joint Properties [Volume 5, Issue 17, 2014, Pages 27-39]
  • Friction Stir Welding Influence of Friction Stir Welding Parameters on Mechanical and Metallurgical Properties in Lap Joints of 5456Aluminum Alloy [Volume 10, Issue 36, 2019, Pages 141-156]
  • Friction Stir Welding Modification of mechanical properties of friction stir welded AM60 magnesium alloy with changing rotational speed and addition of nano alumina particles [Volume 12, Issue 45, 2021, Pages 47-64]
  • Friction stir welding process The effect of pin shape on microstructure and mechanical properties of HA-Ti surface composites produced by FSP method [Volume 14, Issue 52, 2023, Pages 73-87]
  • FTIR An Experimental and Simulational Investigation on Schiff-base Complex of Cobalt and Corresponding Ligand as Corrosion Inhibitor in Acidic Solution [Volume 5, Issue 17, 2014, Pages 127-140]
  • FTIR. HNMR A detailed DOE study on temperature, concentration and their interactions on corrosion protection of carbon steel [Volume 12, Issue 45, 2021, Pages 77-94]
  • Full martensitic microstructure Investigation of abnormal tensile behavior of DIN 16MnCr5 low carbon low alloy steel under ferrite-martensite dual-phase microstructures in comparison with full martensitic condition [Volume 11, Issue 41, 2021, Pages 17-34]
  • Functionally graded materials Microstructural Grading of Al-11 wt.%Mg2Si Hypoeutectic Alloy by Centrifugal Casting [Volume 1, Issue 1, , Pages 11-20]
  • Furfuryl alcohol Investigation onthe effect of both Content and Type of Carbon on Low Temperature Synthesis of SiC by Using Magnesiothermal Reduction Process [Volume 5, Issue 17, 2014, Pages 111-126]

G

  • Gamma prime Investigation of gamma precipitation process under effect of strain in Nimonic80A nickel base superalloy [Volume 12, Issue 43, 2021, Pages 36-55]
  • Gas chlorinator Effect of Strain Rate on the Hot Tensile Behavior of Invar Alloy Failure analysis of clogging caused by corrosion of copper pipes containing chloride gas in the presence of moisture (case study) [Volume 8, Issue 31, 2018, Pages 29-40]
  • Gas-liquid membrane contactor Fabrication and characterization of developed polysulfone hollow fiber membranes for dehydration of gas streams via gas-liquid membrane contactor [Volume 11, Issue 40, 2021, Pages 45-58]
  • Gas sensor Investigating Nanocomposite thin Film of PEDOT: PSS/SnO2 as CO gas Sensor [Volume 4, Issue 14, 2014, Pages 55-66]
  • Gas sweetening Corrosion assessment of Amine regenerator column of SPGC using process simulation in gas sweetening unit to mitigate corrosion rate by controlling process parameters [Volume 10, Issue 37, 2019, Pages 91-104]
  • Gas transmission pipelines Implementation of integrity Management System for Gas Transmission Pipelines in South Zagros Region Based on ASME B31.8s [Volume 13, Issue 49, 2022, Pages 14-1]
  • Gas tungsten arc welding Microstructure, Hardness and Wear Resistance of the Hard Layer Containing Silicon Carbide Particles on ASTM A106 Steel Produced by GTAW Welding [Volume 6, Issue 21, 2016, Pages 121-136]
  • Gas tungsten arc welding Influence of filler metal on the microstructure of dissimilar welds between UNS S32205 duplex stainless steel and ASTM A517 Quench and tempered steel [Volume 8, Issue 30, 2018, Pages 125-138]
  • Gelatin Synthesis of porous hydroxyapatite nano particles via sol-gel route by using different organic polymers [Volume 11, Issue 41, 2021, Pages 49-62]
  • Gel-casting Investigating the Rheological Behavior of Silicon Carbide Gel Casting Suspensions and its Effect on the Silicon Carbide Bodies [Volume 10, Issue 35, 2019, Pages 77-88]
  • Genetic Algorithm Cation Distribution, Structural Parameters and Magnetic Moment in the Spinel Structure of Li-Zn Ferrite Prepared by Glycine-Nitrate Process [Volume 4, Issue 16, 2014, Pages 43-56]
  • Geopolymer Neutron Absorption Properties of Geopolymeric Composite used Taftan Mountain Volcanic Ash [Volume 10, Issue 37, 2019, Pages 19-32]
  • Glass Ceramic 45S5 Investigating the effect of replacing CaO with CaF2 on bioactivity and compressive strength of 45S5 glass ceramic synthesized from soda-lime glass waste by solid state method [Volume 14, Issue 51, 2023, Pages 39-57]
  • Glass fiber Flexural Properties of Epoxy Matrix Composites Reinforced by Milled Fibers [Volume 6, Issue 23, 2016, Pages 47-60]
  • Glass fiber Investigating the Tribological Behavior of Epoxy Matrix Composites Reinforced by Milled Fibers [Volume 6, Issue 24, 2016, Pages 51-62]
  • Glycine-Nitrate Process Cation Distribution, Structural Parameters and Magnetic Moment in the Spinel Structure of Li-Zn Ferrite Prepared by Glycine-Nitrate Process [Volume 4, Issue 15, 2014, Pages 91-102]
  • GMAW Study of Microstructure and Mechanical properties of Welded mild steel fabricated by FCAW and Compare with GMAW Process [Volume 8, Issue 30, 2018, Pages 1-14]
  • Gold Synthesis of g-C3N4/Au nanocomposite as a photocatalyst for hydrogen generation [Volume 10, Issue 38, 2019, Pages 67-78]
  • Grain size Effect of Cooling Rate and Grain Refining Agents on Microstructure Characteristics of Al-Cu Alloys by Computer- Aided Cooling Curve Method [Volume 6, Issue 23, 2016, Pages 75-88]
  • Grain size Effect of Sr on Microstructure and Mechanical Properties of AZ91 Magnesium Alloy [Volume 8, Issue 32, 2018, Pages 31-42]
  • Grain size Effect of Pb on Microstructure and Mechanical Properties of AZ91 Magnesium Alloy [Volume 9, Issue 33, 2018, Pages 25-36]
  • Grain size A comparative study on the effect of electrodeposition current density on the grain size of Ni and Ni-W nanocrystalline coatings [Volume 11, Issue 40, 2021, Pages 33-44]
  • Graphene Investigation and comparison of electromagnetic properties of epoxy-graphene and epoxy-carbon nanotube nanocomposites [Volume 7, Issue 26, 2016, Pages 85-94]
  • Graphene Synthesis of nickel-cobalt-aluminum/graphene nanocomposite and its electrochemical performance as supercapacitor [Volume 11, Issue 42, 2021, Pages 63-80]
  • Graphene Investigation of the structure and mechanical properties of aluminum 6061-graphene nanocomposite fabricated by the friction stir processing [Volume 13, Issue 48, 2022, Pages 73-90]
  • Graphene nanosheet film Graphene nanosheets film by plasma electrolysis deposition [Volume 7, Issue 26, 2016, Pages 75-84]
  • Graphene oxide Design and fabrication of electrochemical biosensor based on β-CD-Graphene nanocomposite for specific adsorption of curcumin, chlorpromazine and clomipramine [Volume 7, Issue 28, 2016, Pages 113-124]
  • Graphene oxide synthesis and Identification of superparamagnetic graphene oxide- Iron oxide nanoparticles coated by chitosan and modified by Amino acid [Volume 9, Issue 34, 2018, Pages 61-76]
  • Graphene oxide Application of Graphene Oxide Quantum Dots in Planar Perovskite Solar Cell [Volume 12, Issue 44, 2021, Pages 53-64]
  • Graphene oxide Preysler polyoxometalate supported on functionalized graphene oxide nanoparticles: synthesis, identification and investigation of its catalytic activity [Volume 14, Issue 54, 2023, Pages 1-16]
  • Graphite Wear Properties of Al-Gr Composites Produced Using Liquid Homogenization Followed by Cold Press-Sintering [Volume 7, Issue 26, 2016, Pages 95-104]
  • Graphite Investigation of SiC graded coating formation mechanism on graphite by pack cemetation process and influenece of types of raw material [Volume 7, Issue 28, 2016, Pages 39-46]
  • Graphite Investigation of microstructure and wear resistance of AZ31B/SiO2/graphite hybrid surface composite produced by friction stir processing (FSP) [Volume 10, Issue 37, 2019, Pages 47-62]
  • Graphite Morphology Effects of Alumina Particles and Carbon Monoxide Gas Bubbles Within the Melt on the Graphite Morphology and Microstructure of Gray Cast Iron [Volume 6, Issue 22, 2016, Pages 1-12]
  • Graphitic carbon nitride Synthesis of g-C3N4/Au nanocomposite as a photocatalyst for hydrogen generation [Volume 10, Issue 38, 2019, Pages 67-78]
  • Gravity Gravitational Effects on Compact Shaping and Microstructure during Supersolidus Liquid Phase Sintering of Cu-10Sn-10Pb [Volume 6, Issue 23, 2016, Pages 127-138]
  • Gray Cast Iron Addition of 6.2% Aluminum on the Microstructure and Mechanical Properties of Hypoeutectic Gray Iron [Volume 4, Vol.4/No.13/Autumn 2013, 2014, Pages 13-20]
  • Gray Cast Iron Effects of Alumina Particles and Carbon Monoxide Gas Bubbles Within the Melt on the Graphite Morphology and Microstructure of Gray Cast Iron [Volume 6, Issue 22, 2016, Pages 1-12]
  • Green Sand Compressive Strength Determining the Compressive Strength of Green Sand Moulds with Different Moisture Contents, Using Artificial Neural Networks [Volume 4, Vol.4/No.13/Autumn 2013, 2014, Pages 47-56]
  • Green Sand Mould Determining the Compressive Strength of Green Sand Moulds with Different Moisture Contents, Using Artificial Neural Networks [Volume 4, Vol.4/No.13/Autumn 2013, 2014, Pages 47-56]
  • GS45 CrNiMo 4-2 Steel Effect Of Quenching and Tempering Temperature on the Fracture Quality of GS-45CrNiMo4-2 Steel, Through the Quench-Temper Heat Treatment Cycle [Volume 9, Issue 34, 2018, Pages 77-92]
  • GTAW The effect of B4C particle contents on hardness and wear resistance of Al-SiC-B4C composite formatted on AA332 via GTAW process [Volume 8, Issue 31, 2018, Pages 123-140]
  • GTAW The effect of Si addition on microstructure and tribological properties of Fe-Al claddings produced by GTAW process [Volume 10, Issue 37, 2019, Pages 149-162]
  • GTA welding Mechanical and Physical Properties Laser and GTA Welding of Commercial Pure Titanium [Volume 4, Issue 16, 2014, Pages 71-80]
  • GTD-111 Hardness Prediction in the Ni-Based Superalloy GTD-111 Using Quench Factor Analysis (QFA) [Volume 8, Issue 31, 2018, Pages 41-50]
  • GTD-111 Flow behavior and microstructural investigation of GTD 111 cast nickel base superalloy during hot pressure test [Volume 8, Issue 31, 2018, Pages 167-178]

H

  • H13 hot-work tool steel, Nd:YAG laser, RSM The Effect of Pulsed Laser Parameters on Surface Compositing of H13-TiC [Volume 8, Issue 31, 2018, Pages 61-78]
  • Hadfield steel Investigation on Effect of Aluminum on the Corrosion Resistance of Hadfield Austenitic Manganese Steel [Volume 7, Issue 27, 2016, Pages 1-14]
  • Hadfield steel An investigation on the effects of interpass temperature on corrosion behavior of weld metal of Hadfield high carbon steel weld joint [Volume 8, Issue 29, 2018, Pages 147-160]
  • Hastelloy B-2 Investigation of the effect of current intensity and frequency in PC-GTAW on microstructural evolutions of weld joints of Hastelloy B-2 superalloy [Volume 10, Issue 37, 2019, Pages 1-18]
  • Healing Effect Determination of the Degree of Sensitization in AISI 316 Stainless Steel by the Electrochemical Impedance Technique [Volume 4, Issue 16, 2014, Pages 29-42]
  • Heat Input Investigating the Effects of Heat Input on Corrosion Rate of Joint of Duplex Stainless Steel 2205 Weldments by GTAW Process [Volume 5, Issue 17, 2014, Pages 95-110]
  • Heat-treatment Fabrication of Crystalline Ni-B-Al2O3 Composite Coating by Electroless Method and its Tribological Characterizations [Volume 4, Issue 16, 2014, Pages 21-29]
  • Heat-treatment Synthesis of g-C3N4/Au nanocomposite as a photocatalyst for hydrogen generation [Volume 10, Issue 38, 2019, Pages 67-78]
  • Heat Treatment Electroless Deposition of Ni-P/nanoPTFE Composite Coating and Investigation of Its Properties [Volume 6, Issue 21, 2016, Pages 61-72]
  • Heat Treatment Investigating the effect of tungsten and heat treatment on microstructure and wear behavior of Ni-hard 4 cast iron [Volume 6, Issue 24, 2016, Pages 13-28]
  • Heat Treatment Investigation on the Effects of Using Salt Water Bathroom Quenching on the Corrosion Behavior of Hadfield Manganese Steel [Volume 6, Issue 24, 2016, Pages 29-38]
  • Heat Treatment Investigating the Effects of Heat Treatment in the Microstructure and Metallurgical Properties of the Explosive Welding of 304 Stainless Steel and CK45 Carbon Steel [Volume 7, Issue 26, 2016, Pages 19-34]
  • Heat Treatment Investigation on Effect of Aluminum on the Corrosion Resistance of Hadfield Austenitic Manganese Steel [Volume 7, Issue 27, 2016, Pages 1-14]
  • Heat Treatment Investigating on effect of heat treatment on microstructure and metallurgical properties of three layers explosively bonded Cu/Al/Cu plates [Volume 8, Issue 30, 2018, Pages 29-44]
  • Heat Treatment Effect of Heat Treatment and Hot Working on Vibrational and Mechanical Properties of Magnesium Alloy AZ91 [Volume 8, Issue 31, 2018, Pages 79-92]
  • Heat Treatment Effect Of Quenching and Tempering Temperature on the Fracture Quality of GS-45CrNiMo4-2 Steel, Through the Quench-Temper Heat Treatment Cycle [Volume 9, Issue 34, 2018, Pages 77-92]
  • Heat Treatment Effect of Various Heat Treatment Conditions on Nickel Ferrite Nanoparticles and Investigating its Sensitivity to Formaldehyde [Volume 11, Issue 42, 2021, Pages 17-30]
  • Heavy Metals Study of tea compost column biofilter efficiency to remove some heavy metal ions from aqueous solutions [Volume 7, Issue 28, 2016, Pages 67-80]
  • Heavy Metals Investigation of the Efficiency, Kinetics and Isothermic Behavior of Hexavalent Chromium Adsorption from Aqueous Solutions by Using Bioactive Adsorbents (Oak, Pomegranate and Egg Shell) [Volume 10, Issue 37, 2019, Pages 75-90]
  • Hibonite The effect of nano-alumina addition on the properties of high-alumina low-cement self-flowing refractory castables [Volume 8, Issue 29, 2018, Pages 29-42]
  • High frequency Investigation on the effect of frequency and duty cycle on nano-crystalline TiO2 coatings produced by plasma electrolytic oxidation [Volume 9, Issue 33, 2018, Pages 37-52]
  • High-Frequency Investigation of High Frequency Resistance Welding (HFRW) Variables on microstructure and mechanical properties of dissimilar joints between chromium-molybdenum low alloy steel tubes to chromium high alloy steels [Volume 11, Issue 39, 2021, Pages 1-15]
  • High particle reinforcement loading Fabrication of AZ91D/SiC Magnesium Matrix Composite with High Particle Reinforcement Loading, Produced by Mechanical Milling of Chips and Semi-Solid Powder Processing [Volume 10, Issue 36, 2019, Pages 17-32]
  • High-silicon low-alloy steel Investigating the Effect of Intercritical Annealing Heat Treatment on the Quenching and Partitioning of Ferrite-Bainite-Martensite Microphases in High-Silicon Low-Alloy DIN 1.5025 Steel [Volume 14, Issue 52, 2023, Pages 88-108]
  • High Temperature Superconductors The Effect of Silver Nanoparticles on AC Magnetic Susceptibility of High Temperature Y123 Superconductor [Volume 12, Issue 45, 2021, Pages 95-110]
  • Honeycomb The effect of carbon nano tubes on the compressive strength and flexural of epoxy honeycomb sandwich panels [Volume 10, Issue 35, 2019, Pages 49-62]
  • Hot Corrosion Investigating the Cyclic Oxidation and Hot Corrosion of Nanostructured CoNiCrAlYSi Coatings Applied by HVOF Process [Volume 6, Issue 21, 2016, Pages 97-108]
  • Hot deformation processes Modeling the hot deformation flow curves of API X65 pipeline steel using the exponential law equation [Volume 6, Issue 24, 2016, Pages 39-50]
  • Hot Extrusion Preparation of Super-High Strength Bimodal Aluminum Based Nanocomposite Via Mechanical Alloying and Hot Extrusion [Volume 4, Vol.4/No.13/Autumn 2013, 2014, Pages 83-98]
  • Hot rolling Study on microstructure and mechanical properties of API X70 steel at various hot rolling conditions [Volume 11, Issue 41, 2021, Pages 79-90]
  • Hot Stage Microscope The Use of Hot Stage Microscope to Analysis the Fluidity of High Speed Mold Powders in Continuous Casting of Steel [Volume 4, Issue 14, 2014, Pages 1-10]
  • Hot tensile test Effect of Strain Rate on the Hot Tensile Behavior of Invar Alloy [Volume 6, Issue 23, 2016, Pages 31-38]
  • HSC chemistry software Investigation of SiC graded coating formation mechanism on graphite by pack cemetation process and influenece of types of raw material [Volume 7, Issue 28, 2016, Pages 39-46]
  • HVOF Investigating the Cyclic Oxidation and Hot Corrosion of Nanostructured CoNiCrAlYSi Coatings Applied by HVOF Process [Volume 6, Issue 21, 2016, Pages 97-108]
  • Hyaluronic acid Hydroxyapatite - Hyaluronic acid scaffold production using solvent extraction method [Volume 10, Issue 36, 2019, Pages 133-140]
  • Hybrid nanocomposite Preparation and evaluation of mechanical behavior of nanostructure Ni-P/Al2O3-SiC composite coating [Volume 11, Issue 39, 2021, Pages 109-120]
  • Hybrid surface nanocomposite Investigation of microstructure and wear resistance of AZ31B/SiO2/graphite hybrid surface composite produced by friction stir processing (FSP) [Volume 10, Issue 37, 2019, Pages 47-62]
  • Hydration Resistance Hydration Resistance Improvement of MgO-CaO Refractories by the Addition of Nano-ZrO2 [Volume 7, Issue 28, 2016, Pages 135-148]
  • Hydride Diffusion Bonded Alumina Bodies Using Hydride Nanopowders Interlayers and Structural Investigation of Joint Interface [Volume 5, Issue 17, 2014, Pages 1-14]
  • Hydrochloric acid Effect of Strain Rate on the Hot Tensile Behavior of Invar Alloy Failure analysis of clogging caused by corrosion of copper pipes containing chloride gas in the presence of moisture (case study) [Volume 8, Issue 31, 2018, Pages 29-40]
  • Hydrogen generation Synthesis of g-C3N4/Au nanocomposite as a photocatalyst for hydrogen generation [Volume 10, Issue 38, 2019, Pages 67-78]
  • Hydrogen-induced cracking (HIC) Analysis of Hydrogen-Induced Cracking and Lamination in a Pipeline Steel Based on Fitness-For-Service Assessment [Volume 13, Issue 48, 2022, Pages 14-32]
  • Hydrogen production Photogeneration of hydrogen from industrial wastewater containing organic pollutants by using TiO2/ZrO2 nanocomposite [Volume 9, Issue 34, 2018, Pages 147-154]
  • Hydrogen reduction Chemical and mineralogical characterization of Kahnuj ilmenite concentrate and investigation of its reduction behavior in pure hydrogen gas [Volume 14, Issue 51, 2023, Pages 58-69]
  • Hydrometallurgy Investigation of leaching of zinc from oxide waste using citric acid [Volume 9, Issue 33, 2018, Pages 89-96]
  • Hydrothermal Synthesis of nickel-cobalt-aluminum/graphene nanocomposite and its electrochemical performance as supercapacitor [Volume 11, Issue 42, 2021, Pages 63-80]
  • Hydroxyapatite Taguchi Statistical Method to Optimize the Experimental Conditions for the Nano Hydroxyapatite Production by Sol – Gel Method [Volume 4, Issue 15, 2014, Pages 1-10]
  • Hydroxyapatite Applying Titania and Hydroxyapatite coating on Ti-6Al-4V by PEO and hydrothermal processes and investigating its corrosion behavior in simulated body environment [Volume 1, Issue 1, , Pages 1-10]
  • Hydroxyapatite Effect of Mechanical Milling Time on the Synthesis of Hydroxyapatite Nanoparticles by Mechanochemical Method [Volume 10, Issue 35, 2019, Pages 89-100]
  • Hydroxyapatite Hydroxyapatite - Hyaluronic acid scaffold production using solvent extraction method [Volume 10, Issue 36, 2019, Pages 133-140]
  • Hydroxyapatite Synthesis and characterization of tissue engineering network scaffold composed of polycaprolactone diol / polyethyleneglycol / hydroxyapatite [Volume 10, Issue 37, 2019, Pages 33-46]
  • Hydroxyapatite Synthesis of porous hydroxyapatite nano particles via sol-gel route by using different organic polymers [Volume 11, Issue 41, 2021, Pages 49-62]
  • Hydroxyapatite The effect of pin shape on microstructure and mechanical properties of HA-Ti surface composites produced by FSP method [Volume 14, Issue 52, 2023, Pages 73-87]
  • Hypothesis Testing Statistical Micromechanical Analysis of the Effects of Fiber Random Distribution on the Mechanical Properties of Fibrous Composites [Volume 6, Issue 21, 2016, Pages 137-160]

I

  • Impact Energy Investigating the effect of banding on the impact resistance behavior of microalloy steel used in pipelines [Volume 3, Issue 10, , Pages 57-66]
  • Impact Energy Effect Of Quenching and Tempering Temperature on the Fracture Quality of GS-45CrNiMo4-2 Steel, Through the Quench-Temper Heat Treatment Cycle [Volume 9, Issue 34, 2018, Pages 77-92]
  • Impedance Inhibition of Copper Corrosion by Self-Assembled Thin Films of Schiff Bases in Acidic Media  [Volume 5, Issue 17, 2014, Pages 83-94]
  • Impression creep Investigation of creep behavior of ME21 and MX21 magnesium alloys [Volume 9, Issue 34, 2018, Pages 93-110]
  • IN617 superalloy Microstructural characterization and mechanical properties of IN617 superalloy after long-term operation [Volume 12, Issue 44, 2021, Pages 83-102]
  • IN738LC superalloy Tracing the creep lifetime degradation of IN738LC superalloy based on the primary carbide decomposition reaction and composition changes in the carbide regions [Volume 11, Issue 42, 2021, Pages 81-94]
  • Incremental Forming The effect of ultrasonic vibrations on mechanical properties of low carbon steel-pure titanium bilayer sheet in incremental sheet forming process [Volume 8, Issue 32, 2018, Pages 109-124]
  • Indentation creep Indentation creep behavior of AZ61-0.7Si-xCa magnesium alloys [Volume 10, Issue 35, 2019, Pages 1-14]
  • Induction Hot Press Diffusion Bonded Alumina Bodies Using Hydride Nanopowders Interlayers and Structural Investigation of Joint Interface [Volume 5, Issue 17, 2014, Pages 1-14]
  • Infiltration Comparison of mechanical, electrical and chemical stability of BaCe0.7Zr0.1Y0.2O3-δ (BCZY7)-(Li/Na)2CO3 proton conductive composite electrolytes fabricated by mechanical mixing and infiltration methods [Volume 9, Issue 34, 2018, Pages 17-30]
  • Infrared brazing Investigation of effective parameters on dissimilar infrared brazing for Ti-6Al-4Vv and SS316 L by Ag Base filler metal [Volume 11, Issue 41, 2021, Pages 1-16]
  • Inhibitor An Experimental and Simulational Investigation on Schiff-base Complex of Cobalt and Corresponding Ligand as Corrosion Inhibitor in Acidic Solution [Volume 5, Issue 17, 2014, Pages 127-140]
  • In-situ composite In-situ fabrication of titanium metal powder incorporated AA3003 /Al3Ti alloy composite by friction stir processing [Volume 8, Issue 32, 2018, Pages 57-70]
  • In- Situ Composite Effect of Milling Speed on Fabrication Al2O3-ZrB2 in Situ Nano-Composite Powder Via Mechanochemical Synthesis [Volume 4, Issue 15, 2014, Pages 39-50]
  • Insitu synthesis Effect of Mechanical Milling Time on the Synthesis of Hydroxyapatite Nanoparticles by Mechanochemical Method [Volume 10, Issue 35, 2019, Pages 89-100]
  • Integrity assessment Implementation of integrity Management System for Gas Transmission Pipelines in South Zagros Region Based on ASME B31.8s [Volume 13, Issue 49, 2022, Pages 14-1]
  • Interaction The effect of temperature on microstructure during ultra-rapid annealing of severely deformed low-carbon steel [Volume 11, Issue 40, 2021, Pages 1-12]
  • Interaction between bainite crystals and ferrite phase Investigation of abnormal effect of dual-phase ferritic-bainitic microstructures on modification of mechanical properties of MO40 low alloy steel in comparison with full bainitic conditions [Volume 10, Issue 37, 2019, Pages 133-148]
  • Inter-critical annealing Investigation of abnormal tensile behavior of DIN 16MnCr5 low carbon low alloy steel under ferrite-martensite dual-phase microstructures in comparison with full martensitic condition [Volume 11, Issue 41, 2021, Pages 17-34]
  • Interface layer Investigating the effect of degree of dilution and interlayer on the abrasion resistance of the hard-wired coated layer of Fe-Cr-C based on SMAW method on plane carbon steel [Volume 11, Issue 40, 2021, Pages 133-32]
  • Intergranular Corrosion A New Method to Investigate Localized Corrosion on 2024, 7075 and 6061 Aluminium Alloys in the Sea-Like Atmosphere Environments [Volume 4, Vol.4/No.13/Autumn 2013, 2014, Pages 69-82]
  • Intergranular Corrosion Determination of the Degree of Sensitization in AISI 316 Stainless Steel by the Electrochemical Impedance Technique [Volume 4, Issue 16, 2014, Pages 29-42]
  • Intergranular failure Effect of Strain Rate on the Hot Tensile Behavior of Invar Alloy [Volume 6, Issue 23, 2016, Pages 31-38]
  • Intermediate phase Aluminothermic Reduction of Khatoon Abad Molybdenum Trioxide in Microwave: Investigation on the Effect of Aluminum Particle Size and Scale-up on the Reduction Process [Volume 11, Issue 40, 2021, Pages 91-106]
  • Intermetallic Investigating the Effects of Heat Treatment in the Microstructure and Metallurgical Properties of the Explosive Welding of 304 Stainless Steel and CK45 Carbon Steel [Volume 7, Issue 26, 2016, Pages 19-34]
  • Intermetallic compound The effect of titanium interlayer on the mechanical and structural properties of steel- tungsten diffusion bonding [Volume 8, Issue 30, 2018, Pages 105-116]
  • Intermetallic Compounds A New Method to Investigate Localized Corrosion on 2024, 7075 and 6061 Aluminium Alloys in the Sea-Like Atmosphere Environments [Volume 4, Vol.4/No.13/Autumn 2013, 2014, Pages 69-82]
  • Intermetallic Compounds Effect of mechanical alloying and heat treatment process on the phase transformation of Ni-Cr-Al powders mixture [Volume 1, Issue 1, , Pages 31-40]
  • Intermetallic Compounds The Study of the Effects Intermetallic Phases Formation on the Bond Strength and Electrical Resistivity of Al/Cu Bimetal produced by Compound Static Casting [Volume 7, Issue 27, 2016, Pages 27-44]
  • Intermetallic Compounds Modification of mechanical properties of friction stir welded AM60 magnesium alloy with changing rotational speed and addition of nano alumina particles [Volume 12, Issue 45, 2021, Pages 47-64]
  • Intermetallic-matrix composites Effect of TiC and TiB2 Reinforcement Phase Addition on Mechanical and Tribological Properties of NiAl-TiC-TiB2 Composite Produced Through Combustion Synthesis Process [Volume 12, Issue 44, 2021, Pages 41-52]
  • Invar alloy Effect of Strain Rate on the Hot Tensile Behavior of Invar Alloy [Volume 6, Issue 23, 2016, Pages 31-38]
  • Isotherm Efficient Removal of Omeprazole from Water Samples by Utilizing of Carbon Nanotubes as Powerful nanoadsorbent and Comprising with Graphite: Kinetic and Thermodynamic studies [Volume 12, Issue 46, 2021, Pages 1-18]
  • Isotherm model Study of Amitriptyline drug adsorption on multi walled carbon nanotube (MWCNT) [Volume 12, Issue 43, 2021, Pages 70-81]
  • Isotherms models Removal Propargite pesticide from aqueous solution using Penta Aza Tetra Ethylene on Polyacrylamide (PAA-N5) as a novel adsorbent [Volume 10, Issue 38, 2019, Pages 109-124]

K

  • Kahnuj ilmenite concentrate Chemical and mineralogical characterization of Kahnuj ilmenite concentrate and investigation of its reduction behavior in pure hydrogen gas [Volume 14, Issue 51, 2023, Pages 58-69]
  • Kinetic model The finite element analysis of applying the controlling pouer on the surface transformation hardening in the vicinity of discontinuity in the workpiece depth [Volume 7, Issue 26, 2016, Pages 1-18]
  • Kinetic Models Investigation of the Efficiency, Kinetics and Isothermic Behavior of Hexavalent Chromium Adsorption from Aqueous Solutions by Using Bioactive Adsorbents (Oak, Pomegranate and Egg Shell) [Volume 10, Issue 37, 2019, Pages 75-90]
  • Kinetics models Removal Propargite pesticide from aqueous solution using Penta Aza Tetra Ethylene on Polyacrylamide (PAA-N5) as a novel adsorbent [Volume 10, Issue 38, 2019, Pages 109-124]

L

  • LaAPSO-34 Effect of Si/Al Ratio on Physicochemical Properties of Nanostructured LaAPSO-34 for Conversion of Methanol to Light Olefins [Volume 6, Issue 22, 2016, Pages 91-110]
  • Lamination Analysis of Hydrogen-Induced Cracking and Lamination in a Pipeline Steel Based on Fitness-For-Service Assessment [Volume 13, Issue 48, 2022, Pages 14-32]
  • Lap Joint Influence of Friction Stir Welding Parameters on Mechanical and Metallurgical Properties in Lap Joints of 5456Aluminum Alloy [Volume 10, Issue 36, 2019, Pages 141-156]
  • Leaching Investigation of leaching of zinc from oxide waste using citric acid [Volume 9, Issue 33, 2018, Pages 89-96]
  • Leaching A review on the extraction of lithium from its minerals - Case study: Lithium extraction from spodumene concentrate using sulfation roasting under ball milling conditions [Volume 11, Issue 40, 2021, Pages 75-90]
  • Lead free BCZT Investigating the effects of 2.5 mol% Ce doping on electrostriction behavior of lead-free (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 ceramics [Volume 10, Issue 35, 2019, Pages 101-114]
  • Lead (Pb) Effect of Pb on Microstructure and Mechanical Properties of AZ91 Magnesium Alloy [Volume 9, Issue 33, 2018, Pages 25-36]
  • Light Olefins Effect of Si/Al Ratio on Physicochemical Properties of Nanostructured LaAPSO-34 for Conversion of Methanol to Light Olefins [Volume 6, Issue 22, 2016, Pages 91-110]
  • LiNi0.8Co0.15Al0.05O2 Investigating the Effect of Co-Precipitation Synthesis Time of LiNi0.8Co0.15Al0.05O2 Cathode and Its Structural and Electrochemical Evaluation in Lithium-ion Battery [Volume 13, Issue 47, 2022, Pages 1-20]
  • Liquid-Phase Sintering Improvement in Mechanical Properties of Medical Stainless Steels by Using Liquid-Phase Sintering [Volume 6, Issue 21, 2016, Pages 73-82]
  • Lithium-ion Battery Investigating the Effect of Co-Precipitation Synthesis Time of LiNi0.8Co0.15Al0.05O2 Cathode and Its Structural and Electrochemical Evaluation in Lithium-ion Battery [Volume 13, Issue 47, 2022, Pages 1-20]
  • Lithium minerals A review on the extraction of lithium from its minerals - Case study: Lithium extraction from spodumene concentrate using sulfation roasting under ball milling conditions [Volume 11, Issue 40, 2021, Pages 75-90]
  • Lithium-Zinc Ferrite Cation Distribution, Structural Parameters and Magnetic Moment in the Spinel Structure of Li-Zn Ferrite Prepared by Glycine-Nitrate Process [Volume 4, Issue 15, 2014, Pages 91-102]
  • Local Corrosion Enhancement of Local Corrosion Resistance of CP-Titanium in H2SO4 Solution via Plasma Electrolytic Oxidation [Volume 6, Issue 22, 2016, Pages 127-136]
  • Long-term service Tracing the creep lifetime degradation of IN738LC superalloy based on the primary carbide decomposition reaction and composition changes in the carbide regions [Volume 11, Issue 42, 2021, Pages 81-94]
  • Long-term service Microstructural characterization and mechanical properties of IN617 superalloy after long-term operation [Volume 12, Issue 44, 2021, Pages 83-102]
  • Loss tangent The effect of manganese impurity on the interlayer Al/PVP:CdS/P-Si Schottky structure and its dielectric properties [Volume 12, Issue 43, 2021, Pages 23-35]
  • Low alloy quench and tempered steel Influence of filler metal on the microstructure of dissimilar welds between UNS S32205 duplex stainless steel and ASTM A517 Quench and tempered steel [Volume 8, Issue 30, 2018, Pages 125-138]
  • Low Carbon Steel Determination Optimum Boron Quantity Effect on Low Temperature Impact Energy of Mild Steel Weld Metal that Fabricated by Submerge Arc Welding (SAW) [Volume 6, Issue 21, 2016, Pages 19-36]
  • Low-cement The effect of nano-alumina addition on the properties of high-alumina low-cement self-flowing refractory castables [Volume 8, Issue 29, 2018, Pages 29-42]

M

  • Machinability Production of machinable ferritic-ausferritic ADI by selection of proper partially austenitizing time [Volume 10, Issue 36, 2019, Pages 93-106]
  • Magnesia The Effect of Sodium Hexametaphosphate on the Physical and Mechanical Properties of Monolithic Refractories Prepared from the Wastes of Magnesia - Carbon Bricks [Volume 6, Issue 22, 2016, Pages 45-54]
  • Magnesi-Doloma Hydration Resistance Improvement of MgO-CaO Refractories by the Addition of Nano-ZrO2 [Volume 7, Issue 28, 2016, Pages 135-148]
  • Magnesiothermal synthesis Magnesiothermal synthesis of nanostructured SiC from natural zeolite (clinoptilolite),sacarose and mesoporous carbon CMK-1 under Argon atmospher [Volume 6, Issue 23, 2016, Pages 139-148]
  • Magnesiothermic Investigation onthe effect of both Content and Type of Carbon on Low Temperature Synthesis of SiC by Using Magnesiothermal Reduction Process [Volume 5, Issue 17, 2014, Pages 111-126]
  • Magnesium Deposition, Characterization and Investigation of Photo-Electrical Properties of Nanostructured Thin Film Mg Doped ZnO by Sol-Gel Method [Volume 11, Issue 40, 2021, Pages 107-124]
  • Magnesium alloy Effect of Heat Treatment and Hot Working on Vibrational and Mechanical Properties of Magnesium Alloy AZ91 [Volume 8, Issue 31, 2018, Pages 79-92]
  • Magnesium Alloy AZ31 Feasibilty Study of AZ31/Al2O3 Surface Nanocomposite Fabrication Via Friction Stir Processing [Volume 6, Issue 22, 2016, Pages 65-78]
  • Magnetic and optical properties Growth and investigation of magnetic and optical properties of Fe3O4@CuO core-shell nanostructures [Volume 9, Issue 34, 2018, Pages 155-164]
  • Magnetic anisotropy The Effect of Co Concentration on the Magnetic Properties of Obliquely Sputtered Fe–Co Thin Films [Volume 11, Issue 41, 2021, Pages 91-102]
  • Magnetic nanoparticles Synthesis of FeCo alloyed nanoparticles with different weight ratios via microemulsion route and studying the magnetic properties [Volume 11, Issue 42, 2021, Pages 45-62]
  • Magnetic property Fabrication, Structural Characterization and Magnetic Properties of Nanostructure Fe-Co-W Coatings Prepared by Electrodeposition [Volume 7, Issue 25, 2016, Pages 31-44]
  • Magnetic Susceptibility The Effect of Silver Nanoparticles on AC Magnetic Susceptibility of High Temperature Y123 Superconductor [Volume 12, Issue 45, 2021, Pages 95-110]
  • Magnetite synthesis and Identification of superparamagnetic graphene oxide- Iron oxide nanoparticles coated by chitosan and modified by Amino acid [Volume 9, Issue 34, 2018, Pages 61-76]
  • Magnetite nanoparticles A new method for the green synthesis of Fe3O4 nanoparticles using Alliaceae plant extract and investigating their properties [Volume 14, Issue 53, 2023, Pages 35-52]
  • Manganese Comparison of properties of zinc, zinc/nickel, zinc/nickel/manganese phosphate coatings on 41Cr4 steel substrate [Volume 14, Issue 53, 2023, Pages 53-68]
  • Marine atmospheric Corrosion A New Method to Investigate Localized Corrosion on 2024, 7075 and 6061 Aluminium Alloys in the Sea-Like Atmosphere Environments [Volume 4, Vol.4/No.13/Autumn 2013, 2014, Pages 69-82]
  • Marine Diesel Engine Root Cause Analysis of Water-Cooled Exhaust Manifold in High Speed Marine Diesel Engine [Volume 11, Issue 42, 2021, Pages 1-16]
  • Martensite/Austenite Fracture Resistance Improvement of Micro Alloy Steel Weld in Four Wire Submerged Arc Welding by applying One and Two Thermal Cycles [Volume 6, Issue 23, 2016, Pages 115-126]
  • Martensitic An Investigation of different parameters on the penetration depth and welding width of Ti-6Al-4V alloy by plasma arc welding [Volume 10, Issue 38, 2019, Pages 33-48]
  • MAX phase Investigation on the effects of the amount and source of carbon on synthesis of Ti2AlC nanostructure by self-propagating high temperature combustion synthesis method [Volume 8, Issue 29, 2018, Pages 57-68]
  • MAX phase Investigation on the effect of Al addition on synthesis of Ti3SiC2 nanostructure by Mechanical alloying – heat treatment method [Volume 8, Issue 30, 2018, Pages 15-28]
  • MBF-30 and MBF-20 interlayers Effect of temperature and time, the interlayer on microstructure and mechanical properties of Transient Liquid Phase (TLP) bonding of AISI321 stainless steel [Volume 7, Issue 28, 2016, Pages 95-112]
  • Mean effective strain Investigation of the reduction in area and twist angle effects on the strain distribution, damage and process load of vortex extrusion die [Volume 11, Issue 42, 2021, Pages 95-106]
  • Meaty middling pomegranate Study on the capacity of medicinal intake and release of the polymeric polyurethane and biological parts of pomegranate fruit nanocomposite [Volume 13, Issue 47, 2022, Pages 71-90]
  • Mechanical Activated Self-Propagation Combustion Synthesis (MASHS) Synthesis of MoSi2-20%TiC Nanocomposite by Method Mechanical Activated Self-Propagation Combustion Synthesis (MASHS) [Volume 7, Issue 25, 2016, Pages 71-86]
  • Mechanical Activation Investigation of Phase Evolution of CoFe2O4 Nanoparticles Prepared by limited Mechanical Activation and Heat Treatment in Comparison to Conventional Powder Metallurgy Route [Volume 4, Issue 14, 2014, Pages 31-40]
  • Mechanical Activation A Study on the Effect of Mechanical Activating of Plain Carbon Steel Surface on the Protection Properties of Applied Zinc Phosphate Coating and Paint Adhesion Improvement [Volume 4, Issue 15, 2014, Pages 51-66]
  • Mechanical alloying (MA) Effect of mechanical alloying and heat treatment process on the phase transformation of Ni-Cr-Al powders mixture [Volume 1, Issue 1, , Pages 31-40]
  • Mechanical and resistivity properties Effect of Addition (MoSi2) on the Resistivity and Mechanical Properties of Cu/MoSi2 Composite Produced by Accumulative Rroll Bonding (ARB) Process [Volume 4, Vol.4/No.13/Autumn 2013, 2014, Pages 57-68]
  • Mechanical milling The Effect of Milling Time and Sintering Temperature on the Microstructure and Mechanical Properties of Al/20% SiC Composite Prepared by Powder Metallurgy [Volume 6, Issue 22, 2016, Pages 147-158]
  • Mechanical milling Aluminothermic reduction of zinc sulfide induced ball milling-Effect of ZnS:Al molar ratio on the raw mixture [Volume 9, Issue 34, 2018, Pages 31-44]
  • Mechanical milling Effect of metallic agent on the carbothermic reduction of titanium dioxide in order to produce titanium carbide [Volume 12, Issue 44, 2021, Pages 65-82]
  • Mechanical milling Aluminum nanocrystalline powder production from aluminum alloy scrap by solid state recycling method [Volume 14, Issue 51, 2023, Pages 1-16]
  • Mechanical strength Comparison of mechanical, electrical and chemical stability of BaCe0.7Zr0.1Y0.2O3-δ (BCZY7)-(Li/Na)2CO3 proton conductive composite electrolytes fabricated by mechanical mixing and infiltration methods [Volume 9, Issue 34, 2018, Pages 17-30]
  • Mechanical Surface Coating (SMC) Evaluation of Milling Time and Balls Diameters during Surface Mechanical Coating (SMC) in the Presence of Copper Powder and Nickel Balls [Volume 7, Issue 27, 2016, Pages 67-84]
  • Mechanochemical synthesis Effect of Milling Speed on Fabrication Al2O3-ZrB2 in Situ Nano-Composite Powder Via Mechanochemical Synthesis [Volume 4, Issue 15, 2014, Pages 39-50]
  • Mechanochemical synthesis Effect of Mechanical Milling Time on the Synthesis of Hydroxyapatite Nanoparticles by Mechanochemical Method [Volume 10, Issue 35, 2019, Pages 89-100]
  • Melt spinning Investigation of crystallization kinetics of Co-Fe-Ta-Hf-B melt-spun glassy ribbon with a high thermal stability under isochronal condition [Volume 8, Issue 32, 2018, Pages 169-182]
  • Mesoporous Synthesis and Characterization of Activated Carbon from Rice husk [Volume 11, Issue 40, 2021, Pages 125-136]
  • Mesoporous carbon Magnesiothermal synthesis of nanostructured SiC from natural zeolite (clinoptilolite),sacarose and mesoporous carbon CMK-1 under Argon atmospher [Volume 6, Issue 23, 2016, Pages 139-148]
  • Mesoporous titanium dioxide ساخت و مشخصه یابی فوتوالکترود تیتانیوم دی اکسید مزو متخلخل قالب گیری شده ی اتصال یافته با بیسموت وانادات [Volume 12, Issue 46, 2021, Pages 59-74]
  • Metallic glass Investigation of crystallization kinetics of Co-Fe-Ta-Hf-B melt-spun glassy ribbon with a high thermal stability under isochronal condition [Volume 8, Issue 32, 2018, Pages 169-182]
  • Metal-matrix composites Effect of Addition (MoSi2) on the Resistivity and Mechanical Properties of Cu/MoSi2 Composite Produced by Accumulative Rroll Bonding (ARB) Process [Volume 4, Vol.4/No.13/Autumn 2013, 2014, Pages 57-68]
  • Methanol Effect of Si/Al Ratio on Physicochemical Properties of Nanostructured LaAPSO-34 for Conversion of Methanol to Light Olefins [Volume 6, Issue 22, 2016, Pages 91-110]
  • Methylene Blue Batch adsorption and removal of Methylene Blue (MB) from wastewater using Tassel as a cheap bioadsorbent [Volume 4, Issue 16, 2014, Pages 81-98]
  • Methylene Blue Synthesis, Characterization and investigation of removal process of methylene blue dye by perovskite-type oxides nanoparticles La0.9Sr0.1FeO3 [Volume 10, Issue 35, 2019, Pages 145-168]
  • Methyl orange Synthesis and characterization of bio-nanocomposite of FeOOH-AC and its application in the removal of methyl orange anionic dye [Volume 14, Issue 53, 2023, Pages 69-90]
  • Metoral Evaluation of Metoral pill as an effective and novel inhibitor for corrosion of mild steel in acidic media [Volume 9, Issue 34, 2018, Pages 133-146]
  • Mg2Si morphology Indentation creep behavior of AZ61-0.7Si-xCa magnesium alloys [Volume 10, Issue 35, 2019, Pages 1-14]
  • Mg alloy AZ63 The Effect of Twinning on Texture Evolution of AZ63 Magnesium Alloy During Hot Working [Volume 7, Issue 25, 2016, Pages 45-58]
  • Mg-Mn alloy Investigation of creep behavior of ME21 and MX21 magnesium alloys [Volume 9, Issue 34, 2018, Pages 93-110]
  • Micaceous iron oxide Evaluation of anti-corrosion properties of MIO pigments in the formulation of synthetic rubber based primer used in gas pipeline [Volume 8, Issue 29, 2018, Pages 109-120]
  • Micro alloy steel Fracture Resistance Improvement of Micro Alloy Steel Weld in Four Wire Submerged Arc Welding by applying One and Two Thermal Cycles [Volume 6, Issue 23, 2016, Pages 115-126]
  • Microbial Corrosion Investigating the effect of using colors containing copper oxide and zinc oxide (zinc-rich) on microbial corrosion behavior of sewage pipes [Volume 10, Issue 35, 2019, Pages 15-26]
  • Microbial Corrosion Microbial Corrosion in Cooling Water of Lushan Shahid Beheshti Power Plant [Volume 13, Issue 49, 2022, Pages 26-15]
  • Microbial Corrosion Detection and Analysis of Microbial Influenced Corrosion in Cooling Tower of Shahid Mofateh Power Plant [Volume 13, Issue 50, 2022, Pages 46-59]
  • Microemulsion Synthesis of FeCo alloyed nanoparticles with different weight ratios via microemulsion route and studying the magnetic properties [Volume 11, Issue 42, 2021, Pages 45-62]
  • Micro Hardness Electroless Deposition of Ni-P/nanoPTFE Composite Coating and Investigation of Its Properties [Volume 6, Issue 21, 2016, Pages 61-72]
  • Micromechanics Statistical Micromechanical Analysis of the Effects of Fiber Random Distribution on the Mechanical Properties of Fibrous Composites [Volume 6, Issue 21, 2016, Pages 137-160]
  • Microporous Investigation onthe effect of both Content and Type of Carbon on Low Temperature Synthesis of SiC by Using Magnesiothermal Reduction Process [Volume 5, Issue 17, 2014, Pages 111-126]
  • Microstructural characteristics Tracing the creep lifetime degradation of IN738LC superalloy based on the primary carbide decomposition reaction and composition changes in the carbide regions [Volume 11, Issue 42, 2021, Pages 81-94]
  • Microstructural characteristics Microstructural characterization and mechanical properties of IN617 superalloy after long-term operation [Volume 12, Issue 44, 2021, Pages 83-102]
  • Microstructural gradient Gravitational Effects on Compact Shaping and Microstructure during Supersolidus Liquid Phase Sintering of Cu-10Sn-10Pb [Volume 6, Issue 23, 2016, Pages 127-138]
  • Micros¬tru¬ct¬ur¬e The Effects of Heat Treatment Parameters on the Microstructures of Aluminium Ductile Cast Iron [Volume 4, Issue 14, 2014, Pages 67-78]
  • Microstructure Addition of 6.2% Aluminum on the Microstructure and Mechanical Properties of Hypoeutectic Gray Iron [Volume 4, Vol.4/No.13/Autumn 2013, 2014, Pages 13-20]
  • Microstructure Microstructure Evaluation of Acrylonitril-Butadiene Copolymer Nanocomposites Reinforced by Nano-Calcium Carbonate by Permeability Test [Volume 6, Issue 22, 2016, Pages 29-44]
  • Microstructure Feasibilty Study of AZ31/Al2O3 Surface Nanocomposite Fabrication Via Friction Stir Processing [Volume 6, Issue 22, 2016, Pages 65-78]
  • Microstructure An Studying on the Synthesis and Densification Behavior of β''- Alumina Electrolyte for Sodium-Sulfur Batteries [Volume 6, Issue 22, 2016, Pages 137-146]
  • Microstructure An Investigation on the effect of adding copper sulfate on the properties and corrosion resistance of electroless nickel-phosphorus coating [Volume 6, Issue 24, 2016, Pages 1-12]
  • Microstructure Characterization of mechanical and corrosion behaviour of multilayered Cu/Al/Al2O3 nano-composite produced by ARB process [Volume 7, Issue 28, 2016, Pages 149-162]
  • Microstructure Effect of heat input on microstructure, mechanical properties and corrosion behavior of 5083-H321 aluminum alloy welded joint using P-MIG process [Volume 7, Issue 28, 2016, Pages 1-16]
  • Microstructure Dry sliding wear behavior of Astaloy85Mo steel surface melted by gas tungsten arc welding [Volume 7, Issue 28, 2016, Pages 27-38]
  • Microstructure Effects of severe plastic deformation on mechanical properties, electrical conductivity and microstructure of Al-7075 alloy [Volume 8, Issue 30, 2018, Pages 73-86]
  • Microstructure Effect of Sr on Microstructure and Mechanical Properties of AZ91 Magnesium Alloy [Volume 8, Issue 32, 2018, Pages 31-42]
  • Microstructure Effect of Pb on Microstructure and Mechanical Properties of AZ91 Magnesium Alloy [Volume 9, Issue 33, 2018, Pages 25-36]
  • Microstructure Investigating the effect of particle size on microstructure, mechanical properties and electrical conductivity of sodium beta-alumina ceramics [Volume 10, Issue 36, 2019, Pages 107-116]
  • Microstructure Investigation of the effect of current intensity and frequency in PC-GTAW on microstructural evolutions of weld joints of Hastelloy B-2 superalloy [Volume 10, Issue 37, 2019, Pages 1-18]
  • Microstructure An Investigation of different parameters on the penetration depth and welding width of Ti-6Al-4V alloy by plasma arc welding [Volume 10, Issue 38, 2019, Pages 33-48]
  • Microstructure Investigation of High Frequency Resistance Welding (HFRW) Variables on microstructure and mechanical properties of dissimilar joints between chromium-molybdenum low alloy steel tubes to chromium high alloy steels [Volume 11, Issue 39, 2021, Pages 1-15]
  • Microstructure Effects of the Replacement Vanadium to Niobium at E347-16 Electrode on Micro-structure and Corrosion Behaviors of Weld Metal [Volume 11, Issue 39, 2021, Pages 31-42]
  • Microstructure Investigation of effective parameters on dissimilar infrared brazing for Ti-6Al-4Vv and SS316 L by Ag Base filler metal [Volume 11, Issue 41, 2021, Pages 1-16]
  • Microstructure Study on microstructure and mechanical properties of API X70 steel at various hot rolling conditions [Volume 11, Issue 41, 2021, Pages 79-90]
  • Microstructure THE EFFECT OF MICROSTRUCTURAL CHANGES ON THE CORROSION PROPERTIES OF 310S AUSTENITIC STAINLESS STEEL AFTER THERMOMECHANICAL TREATMENT [Volume 13, Issue 47, 2022, Pages 21-38]
  • Microstructure Tensile behavior of AZ91 alloy containing silver and under different casting conditions [Volume 13, Issue 50, 2022, Pages 60-80]
  • Microstructure Chemical and mineralogical characterization of Kahnuj ilmenite concentrate and investigation of its reduction behavior in pure hydrogen gas [Volume 14, Issue 51, 2023, Pages 58-69]
  • Microwave Aluminothermic Reduction of Khatoon Abad Molybdenum Trioxide in Microwave: Investigation on the Effect of Aluminum Particle Size and Scale-up on the Reduction Process [Volume 11, Issue 40, 2021, Pages 91-106]
  • Microwave-Assisted Combustion Synthesis Investigation of Effect of Milling Time on Final Microstructure of Nanocrystalline TiB2-TiC Powder Fabricated by MACS Method [Volume 5, Issue 17, 2014, Pages 15-26]
  • Mild Steel An Experimental and Simulational Investigation on Schiff-base Complex of Cobalt and Corresponding Ligand as Corrosion Inhibitor in Acidic Solution [Volume 5, Issue 17, 2014, Pages 127-140]
  • Mild Steel Evaluation of Metoral pill as an effective and novel inhibitor for corrosion of mild steel in acidic media [Volume 9, Issue 34, 2018, Pages 133-146]
  • Milling Flexural Properties of Epoxy Matrix Composites Reinforced by Milled Fibers [Volume 6, Issue 23, 2016, Pages 47-60]
  • Milling Investigating the Tribological Behavior of Epoxy Matrix Composites Reinforced by Milled Fibers [Volume 6, Issue 24, 2016, Pages 51-62]
  • Milling Synthesis of strontium titanate from celestite concentrate [Volume 10, Issue 37, 2019, Pages 105-118]
  • Milling Atmosphere Determination of the Effects of Milling Atmosphere on the Production Process and Characteristics of Boron Nanopowders [Volume 6, Issue 24, 2016, Pages 63-76]
  • Milling time The Effect of Milling Time and Sintering Temperature on the Microstructure and Mechanical Properties of Al/20% SiC Composite Prepared by Powder Metallurgy [Volume 6, Issue 22, 2016, Pages 147-158]
  • Milling time Evaluation of Milling Time and Balls Diameters during Surface Mechanical Coating (SMC) in the Presence of Copper Powder and Nickel Balls [Volume 7, Issue 27, 2016, Pages 67-84]
  • Milling time Effect of Mechanical Milling Time on the Synthesis of Hydroxyapatite Nanoparticles by Mechanochemical Method [Volume 10, Issue 35, 2019, Pages 89-100]
  • Milling time Investigating the effect of particle size on microstructure, mechanical properties and electrical conductivity of sodium beta-alumina ceramics [Volume 10, Issue 36, 2019, Pages 107-116]
  • Mineralogy Chemical and mineralogical characterization of Kahnuj ilmenite concentrate and investigation of its reduction behavior in pure hydrogen gas [Volume 14, Issue 51, 2023, Pages 58-69]
  • MO40 low alloy steels Investigation of abnormal effect of dual-phase ferritic-bainitic microstructures on modification of mechanical properties of MO40 low alloy steel in comparison with full bainitic conditions [Volume 10, Issue 37, 2019, Pages 133-148]
  • Mo40 steel Comparison of Microstructure and Mechanical Properties of Mo40 Steel in Ferrite-Martensite dual phase and quenched tempered condition [Volume 9, Issue 33, 2018, Pages 77-88]
  • Modeling Modeling and investigation of the effect of supersolidus liquid phase sintering variables on physical properties and Mechanics of Cu28Zn alloy [Volume 4, Issue 11, 2014, Pages 1-20]
  • Modified nanoparticles synthesis and Identification of superparamagnetic graphene oxide- Iron oxide nanoparticles coated by chitosan and modified by Amino acid [Volume 9, Issue 34, 2018, Pages 61-76]
  • Mold Powder The Use of Hot Stage Microscope to Analysis the Fluidity of High Speed Mold Powders in Continuous Casting of Steel [Volume 4, Issue 14, 2014, Pages 1-10]
  • Molecular Dynamics Studying mechanical behavior of non-wrinkled phosphorene nanotubes under uniaxial loading [Volume 8, Issue 30, 2018, Pages 117-124]
  • Molecular dynamics simulation Investigating the effect of particle size on Volume-per-atom parameter of TiO2 nanoparticles [Volume 8, Issue 29, 2018, Pages 81-90]
  • Molten pool morphology Investigating on the microstructure of cross-section and surface of Ti-10Mo alloy produced by selective laser melting [Volume 14, Issue 53, 2023, Pages 1-20]
  • Molybdenum Electrochemical Nucleation and Growth of Copper on Molybdenum Substrate: Effect of pH, Potential and Cleaning procedure [Volume 7, Issue 28, 2016, Pages 81-94]
  • Molybdenum Disilicide Synthesis of MoSi2-20%TiC Nanocomposite by Method Mechanical Activated Self-Propagation Combustion Synthesis (MASHS) [Volume 7, Issue 25, 2016, Pages 71-86]
  • Molybdenum dissolution Investigating on the microstructure of cross-section and surface of Ti-10Mo alloy produced by selective laser melting [Volume 14, Issue 53, 2023, Pages 1-20]
  • Molybdenum oxide Aluminothermic Reduction of Khatoon Abad Molybdenum Trioxide in Microwave: Investigation on the Effect of Aluminum Particle Size and Scale-up on the Reduction Process [Volume 11, Issue 40, 2021, Pages 91-106]
  • Monolithic Refractories The Effect of Sodium Hexametaphosphate on the Physical and Mechanical Properties of Monolithic Refractories Prepared from the Wastes of Magnesia - Carbon Bricks [Volume 6, Issue 22, 2016, Pages 45-54]
  • MSR reaction Effect of metallic agent on the carbothermic reduction of titanium dioxide in order to produce titanium carbide [Volume 12, Issue 44, 2021, Pages 65-82]
  • MSR reactions Aluminothermic reduction of zinc sulfide induced ball milling-Effect of ZnS:Al molar ratio on the raw mixture [Volume 9, Issue 34, 2018, Pages 31-44]
  • MTO Effect of Si/Al Ratio on Physicochemical Properties of Nanostructured LaAPSO-34 for Conversion of Methanol to Light Olefins [Volume 6, Issue 22, 2016, Pages 91-110]
  • Mullite Investigation of key Parameters on the Properties of Cordierite Bonded Porous SiC Composites Produced by Reaction-Bonding Method [Volume 4, Issue 16, 2014, Pages 57-70]
  • Multi wall carbon nanotube Study of Amitriptyline drug adsorption on multi walled carbon nanotube (MWCNT) [Volume 12, Issue 43, 2021, Pages 70-81]
  • Municipal wastewater Synthesis and Characterization of Activated Carbon Photocatalyst Modified with ZnO/SnO2 Nanoparticles and Its Application in the Municipal Wastewater Treatment with Advanced Oxidation Process [Volume 14, Issue 52, 2023, Pages 42-60]

N

  • Na2SO4 1M The Effect of Annealing Temperature on The Structure and Corrosion Behavior of Nano-Quasicrystalline Al72Ni13Cr15 alloy Synthesized by Mechanical Alloying [Volume 6, Issue 21, 2016, Pages 161-176]
  • NaCl 3.5% The Effect of Annealing Temperature on The Structure and Corrosion Behavior of Nano-Quasicrystalline Al72Ni13Cr15 alloy Synthesized by Mechanical Alloying [Volume 6, Issue 21, 2016, Pages 161-176]
  • Nano-alumina The effect of nano-alumina addition on the properties of high-alumina low-cement self-flowing refractory castables [Volume 8, Issue 29, 2018, Pages 29-42]
  • Nano-CaCO3 The effect of calcium carbonate particles on the wear behavior of nano-composite gear PA6/PP/Nano CaCO3 [Volume 6, Issue 24, 2016, Pages 95-106]
  • Nano-Calcium Carbonate Microstructure Evaluation of Acrylonitril-Butadiene Copolymer Nanocomposites Reinforced by Nano-Calcium Carbonate by Permeability Test [Volume 6, Issue 22, 2016, Pages 29-44]
  • Nanoclay investigation the mechanism of the effect of clay nanoparticles on corrosion and wear resistance properties of epoxy nanocomposite coating applied to the surface of the carbon steel substrate [Volume 7, Issue 27, 2016, Pages 113-128]
  • Nanocolloid Characterization of Silica Nanoparticles and Nanocolloid Synthesized in Acidic and Alkaline Media [Volume 12, Issue 43, 2021, Pages 56-69]
  • Nano-composite Photocatalytic degradation of reactive red 198 by TiO2-activated carbon nanocomposite [Volume 7, Issue 26, 2016, Pages 35-48]
  • Nanocomposite Investigating Nanocomposite thin Film of PEDOT: PSS/SnO2 as CO gas Sensor [Volume 4, Issue 14, 2014, Pages 55-66]
  • Nanocomposite Investigation onthe effect of both Content and Type of Carbon on Low Temperature Synthesis of SiC by Using Magnesiothermal Reduction Process [Volume 5, Issue 17, 2014, Pages 111-126]
  • Nanocomposite In Situ fabrication of (Cu-Cr)-Al2O3 nanocomposite [Volume 1, Issue 1, , Pages 41-50]
  • Nanocomposite Microstructure Evaluation of Acrylonitril-Butadiene Copolymer Nanocomposites Reinforced by Nano-Calcium Carbonate by Permeability Test [Volume 6, Issue 22, 2016, Pages 29-44]
  • Nanocomposite Investigation of Antibacterial Properties of Silver Nanoparticles and Polyethylene-Silver Nanocomposites [Volume 6, Issue 22, 2016, Pages 159-168]
  • Nanocomposite Synthesis of MoSi2-20%TiC Nanocomposite by Method Mechanical Activated Self-Propagation Combustion Synthesis (MASHS) [Volume 7, Issue 25, 2016, Pages 71-86]
  • Nanocomposite Investigation and comparison of electromagnetic properties of epoxy-graphene and epoxy-carbon nanotube nanocomposites [Volume 7, Issue 26, 2016, Pages 85-94]
  • Nanocomposite Design and fabrication of electrochemical biosensor based on β-CD-Graphene nanocomposite for specific adsorption of curcumin, chlorpromazine and clomipramine [Volume 7, Issue 28, 2016, Pages 113-124]
  • Nanocomposite Study of Mechanical and Thermal Properties of NBR/PP-Nano Clay Composite [Volume 8, Issue 31, 2018, Pages 17-28]
  • Nanocomposite Synthesis of Fe3O4/SiO2/TiO2-Ag Core Shell Nanocomposites and Investigation of its Magnetic Properties [Volume 8, Issue 31, 2018, Pages 51-60]
  • Nanocomposite Synthesis and Study of Properties of Bioactive Glass (45S)/TiO2/Fluorapatite Nanocomposite [Volume 8, Issue 32, 2018, Pages 73-96]
  • Nanocomposite Optimization of physical and mechanical properties of calcium silicate nanocomposite by Taguchi method [Volume 11, Issue 39, 2021, Pages 77-90]
  • Nanocomposite Synthesis of nickel-cobalt-aluminum/graphene nanocomposite and its electrochemical performance as supercapacitor [Volume 11, Issue 42, 2021, Pages 63-80]
  • Nanocomposite Study on the capacity of medicinal intake and release of the polymeric polyurethane and biological parts of pomegranate fruit nanocomposite [Volume 13, Issue 47, 2022, Pages 71-90]
  • Nanocomposite Investigation of the structure and mechanical properties of aluminum 6061-graphene nanocomposite fabricated by the friction stir processing [Volume 13, Issue 48, 2022, Pages 73-90]
  • Nano Composite Thermodynamic Analysis of Pressureless Sintering of B4C-Si Nano Composite by Factsage Software [Volume 4, Issue 15, 2014, Pages 79-90]
  • Nano Composites Hardness Feasibilty Study of AZ31/Al2O3 Surface Nanocomposite Fabrication Via Friction Stir Processing [Volume 6, Issue 22, 2016, Pages 65-78]
  • Nanocrystal Characterization and Dielectric Properties of Nanocrystalline NiO-based Electroceramics Prepared by Mechanical Alloying [Volume 4, Issue 14, 2014, Pages 41-54]
  • Nanocrystaline Synthesis and Characterization of ZnO Nanocrystal Composites with High Surface Area Supported on Silica-Alumina Matrix by Sol-gel [Volume 4, Vol.4/No.13/Autumn 2013, 2014, Pages 1-12]
  • Nanocrystalline coating A comparative study on the effect of electrodeposition current density on the grain size of Ni and Ni-W nanocrystalline coatings [Volume 11, Issue 40, 2021, Pages 33-44]
  • Nanocrystalline Ni-Mn-Zn Ferrites Structure, Microstructure, Magnetic and Electromagnetic Properties Ni-Mn-Zn Ferrite Produced by Glycine-Nitrate Process [Volume 7, Issue 27, 2016, Pages 45-56]
  • Nano Fast Cement Optimization of physical and mechanical properties of calcium silicate nanocomposite by Taguchi method [Volume 11, Issue 39, 2021, Pages 77-90]
  • Nano-fibers Investigation of Morphology and production efficiency of Produced Nano-Fibers with multi-nozzle electrospinning process [Volume 9, Issue 33, 2018, Pages 97-112]
  • Nano- glass Design and Synthesis of Biodegradable Nano-Glass Composite for Use in Tissue Culture Engineering [Volume 4, Issue 14, 2014, Pages 11-30]
  • Nano Hydroxyapatite Optimization of physical and mechanical properties of calcium silicate nanocomposite by Taguchi method [Volume 11, Issue 39, 2021, Pages 77-90]
  • Nano oxide particle Synthesis and Characterization of Nanoparticles of Magnesium-Copper Oxide with Paramagnetic Properties [Volume 8, Issue 30, 2018, Pages 163-172]
  • Nanoparticle Investigating the role of electrode material and CTAB protective concentration in the synthesis of copper nanoparticles by electrochemical method [Volume 13, Issue 48, 2022, Pages 1-14]
  • Nanoparticle Preysler polyoxometalate supported on functionalized graphene oxide nanoparticles: synthesis, identification and investigation of its catalytic activity [Volume 14, Issue 54, 2023, Pages 1-16]
  • Nano Particle Diffusion Bonded Alumina Bodies Using Hydride Nanopowders Interlayers and Structural Investigation of Joint Interface [Volume 5, Issue 17, 2014, Pages 1-14]
  • Nano Particle Effect of pH on Production Process and Characteristics of Zirconium Carbide Nano Particles Synthesized by Sol-Gel Method [Volume 7, Issue 25, 2016, Pages 1-12]
  • Nanoparticles Optimizing Parameters for Chemical Synthesis of Fe-B Alloy Nanoparticles by Taguchi Method [Volume 4, Issue 15, 2014, Pages 21-28]
  • Nanoparticles Synthesis of copper-tin metal oxide nanoparticles by the electrical explosion wire method and investigation antibacterial properties [Volume 8, Issue 32, 2018, Pages 125-136]
  • Nanoparticles Effect of Mechanical Milling Time on the Synthesis of Hydroxyapatite Nanoparticles by Mechanochemical Method [Volume 10, Issue 35, 2019, Pages 89-100]
  • Nanoparticles Effect of nano Si3N4، Al2O3 و AlMg and cold rolling process on the microstructural and mechanical properties of AL-6061alloy [Volume 10, Issue 35, 2019, Pages 115-128]
  • Nanoparticles Characterization of Silica Nanoparticles and Nanocolloid Synthesized in Acidic and Alkaline Media [Volume 12, Issue 43, 2021, Pages 56-69]
  • Nanoparticles The investigation of Structural and Magnetic Properties of Lanthanum and Barium Located into Multiferroic Ferrite Bismuth Nanoparticles in the Presence of Sugar Based Natural Surfactants Using Coprecipitation Approach [Volume 12, Issue 45, 2021, Pages 33-46]
  • Nanoparticles of Titania Synthesis and Evaluation of Antibacterial Activity of Silver-Doped Titania Nanoparticles as an Antibacterial Additive to Dental Materials [Volume 4, Vol.4/No.13/Autumn 2013, 2014, Pages 21-34]
  • Nanopowder Synthesis, Characterization and investigation of removal process of methylene blue dye by perovskite-type oxides nanoparticles La0.9Sr0.1FeO3 [Volume 10, Issue 35, 2019, Pages 145-168]
  • Nano Quasicrystalline The Effect of Annealing Temperature on The Structure and Corrosion Behavior of Nano-Quasicrystalline Al72Ni13Cr15 alloy Synthesized by Mechanical Alloying [Volume 6, Issue 21, 2016, Pages 161-176]
  • Nano-sized calcium carbonate Study of Scratch Resistance of Polyethylene and its Composite Reinforced with Nano-Sized Calcium Carbonate [Volume 4, Issue 14, 2014, Pages 79-92]
  • Nanostructure Fabrication, Structural Characterization and Magnetic Properties of Nanostructure Fe-Co-W Coatings Prepared by Electrodeposition [Volume 7, Issue 25, 2016, Pages 31-44]
  • Nanostructure Optimization of Photocatalytic Degradation of Cephalexin Drug Contaminant from Aqueous Solutions by Synthesized Zn-MOC Nanostructures Using Response Surface Methodology [Volume 12, Issue 43, 2021, Pages 94-108]
  • Nanostructured bulk pieces Spark plasma sintering of aluminum 3000 and 5000 alloys powder obtained from recycling of Used Beverage Cans (UBCs) [Volume 14, Issue 54, 2023, Pages 17-34]
  • Nanostructured coating and St37 steel Investigation of structure and tribological behavior of nanostructured DLC coating, deposited by PACVD and Arc-PVD processes [Volume 8, Issue 30, 2018, Pages 87-104]
  • Nanostructured silicon carbide Magnesiothermal synthesis of nanostructured SiC from natural zeolite (clinoptilolite),sacarose and mesoporous carbon CMK-1 under Argon atmospher [Volume 6, Issue 23, 2016, Pages 139-148]
  • Nanostructured thin films Investigation the effect of In-doping on the structural and optical properties of electrodeposited SnS thin film [Volume 8, Issue 32, 2018, Pages 43-56]
  • Nano-ZrO2 Hydration Resistance Improvement of MgO-CaO Refractories by the Addition of Nano-ZrO2 [Volume 7, Issue 28, 2016, Pages 135-148]
  • NASICON synthesis and investigation of solid electrolyte ion conducting lithium aluminium titanium phosphate [Volume 10, Issue 36, 2019, Pages 1-16]
  • Natural Adsorbent Study of tea compost column biofilter efficiency to remove some heavy metal ions from aqueous solutions [Volume 7, Issue 28, 2016, Pages 67-80]
  • Natural ageing The effect of severe plastic deformation on the natural ageing behavior of aluminum alloy 2024 [Volume 6, Issue 23, 2016, Pages 39-46]
  • Natural Corncob Studying the Adsorption Behavior of Copper (II) Ions from Industrial Waste Water Solutions Using Corncob Particles [Volume 4, Vol.4/No.13/Autumn 2013, 2014, Pages 35-46]
  • NBR/PP Study of Mechanical and Thermal Properties of NBR/PP-Nano Clay Composite [Volume 8, Issue 31, 2018, Pages 17-28]
  • Near-Neutral pH An Investigation on Stress Corrosion Cracking Behaviorof API-5L-X52 Steel in Near Neutral pH Solution [Volume 5, Issue 17, 2014, Pages 55-64]
  • Neutron Absorber Neutron Absorption Properties of Geopolymeric Composite used Taftan Mountain Volcanic Ash [Volume 10, Issue 37, 2019, Pages 19-32]
  • Nickel based superalloys Microstructural Characterization and Damage Mechanism of the First Stage Blade GE MS9001 After Long-term Exposure [Volume 14, Issue 51, 2023, Pages 58-69]
  • Nickel-Cobalt Investigation of corrosion behavior nanocrystalline Nickel-Cobalt coating by electrodeposition [Volume 1, Issue 1, , Pages 51-60]
  • Nickel Oxide. Mechanical Alloying Characterization and Dielectric Properties of Nanocrystalline NiO-based Electroceramics Prepared by Mechanical Alloying [Volume 4, Issue 14, 2014, Pages 41-54]
  • Nickle Effect of MCrAlY coating on crack formation during thermal fatigue testing of a directionally solidified Nickle based superalloy [Volume 13, Issue 50, 2022, Pages 81-97]
  • NiFe2O4 Nano Particles Effect of Various Heat Treatment Conditions on Nickel Ferrite Nanoparticles and Investigating its Sensitivity to Formaldehyde [Volume 11, Issue 42, 2021, Pages 17-30]
  • Ni ferrite Investigation of Structure and Magnetic Properties of Ni Ferrite Powders Synthesized by Plasma Arc Discharge [Volume 7, Issue 28, 2016, Pages 17-26]
  • Ni-hard 4 cast iron Investigating the effect of tungsten and heat treatment on microstructure and wear behavior of Ni-hard 4 cast iron [Volume 6, Issue 24, 2016, Pages 13-28]
  • Nimonic80A superalloy Investigation of gamma precipitation process under effect of strain in Nimonic80A nickel base superalloy [Volume 12, Issue 43, 2021, Pages 36-55]
  • NiO Fabrication of solid oxide fuel cell (SOFC) anodes by electrophoretic deposition of NiO-YSZ composite powder [Volume 1, Issue 1, , Pages 61-70]
  • Niobium Effects of the Replacement Vanadium to Niobium at E347-16 Electrode on Micro-structure and Corrosion Behaviors of Weld Metal [Volume 11, Issue 39, 2021, Pages 31-42]
  • Ni-P/Al2O3-SiC coating Preparation and evaluation of mechanical behavior of nanostructure Ni-P/Al2O3-SiC composite coating [Volume 11, Issue 39, 2021, Pages 109-120]
  • Ni-P electroless Achieving optimal conditions for manufacturing of A356 aluminum alloy/ BN(h) composite using stir casting [Volume 8, Issue 29, 2018, Pages 129-146]
  • Ni -P Nano - Structured The influence of two types of nano-structured Ni-P and zinc-phosphate primer on the corrosion resistance of painted low carbon steel [Volume 10, Issue 36, 2019, Pages 33-50]
  • N-isopropyl acrylamide Synthesis and Characterization of Temperature‐Sensitive Hydrogel Copolymer Based on N-isopropylacrylamide for Medical Applications [Volume 7, Issue 27, 2016, Pages 15-26]
  • NiTiHf alloys Effect of cold rolling process on recovery strain and recovery ratio of Ni50Ti40Hf10 shape memory alloy [Volume 10, Issue 35, 2019, Pages 27-38]
  • NiTi intermetallic compound The application of combustion synthesis reactions in Ni-Ti system in the joining of steel to tungsten carbide [Volume 11, Issue 41, 2021, Pages 103-114]
  • Nitrocarburizing Effect of sodium carbonate additive on corrosion behavior of nitrocarburized coating by cathodic plasma electrolytic [Volume 9, Issue 33, 2018, Pages 67-76]
  • Nitrogen plasma Comparison of oxygen and nitrogen plasmas for production of nano-composite layers of alumina and aluminium [Volume 7, Issue 27, 2016, Pages 57-66]
  • Ni-W alloy coating A comparative study on the effect of electrodeposition current density on the grain size of Ni and Ni-W nanocrystalline coatings [Volume 11, Issue 40, 2021, Pages 33-44]
  • Non-solvent additive Fabrication and characterization of developed polysulfone hollow fiber membranes for dehydration of gas streams via gas-liquid membrane contactor [Volume 11, Issue 40, 2021, Pages 45-58]
  • Non-wrinkled phosphorene nanotubes Studying mechanical behavior of non-wrinkled phosphorene nanotubes under uniaxial loading [Volume 8, Issue 30, 2018, Pages 117-124]
  • Nucleating Agent Investigation of Role of both Nucleating Agent and Plasticizer on Physical, Mechanical and Thermal Properties of Poly(Lactic Acid) [Volume 6, Issue 21, 2016, Pages 53-60]
  • Nucleation and Growth Electrochemical Nucleation and Growth of Copper on Molybdenum Substrate: Effect of pH, Potential and Cleaning procedure [Volume 7, Issue 28, 2016, Pages 81-94]
  • Numerical Modeling Numerical modeling of dissolution process of spherical precipitates in alloys by differential quadrature method (DQM) [Volume 12, Issue 43, 2021, Pages 82-94]

O

  • Oblique deposition Magnetic anisotropy The Effect of Oblique Deposition on the Magnetic Behavior of Fe-Co Alloy Thin Films Fabricated by Sputtering Technique [Volume 11, Issue 42, 2021, Pages 31-44]
  • Oblique sputtering technique The Effect of Co Concentration on the Magnetic Properties of Obliquely Sputtered Fe–Co Thin Films [Volume 11, Issue 41, 2021, Pages 91-102]
  • Omeprazole Efficient Removal of Omeprazole from Water Samples by Utilizing of Carbon Nanotubes as Powerful nanoadsorbent and Comprising with Graphite: Kinetic and Thermodynamic studies [Volume 12, Issue 46, 2021, Pages 1-18]
  • Open-cell copper foam Production of Open Cell Copper Foam and assessment of foam Substructure [Volume 8, Issue 31, 2018, Pages 1-16]
  • Open-cell copper foam Production of Open Cell Copper Foam and assessment of foam Substructure [Volume 8, Issue 31, 2018, Pages 179-191]
  • Optical Properties An investigation of vanadium concentration on the optical and electrical properties of TiO2 sol-gel derived thin films [Volume 8, Issue 30, 2018, Pages 173-182]
  • Optical Properties Investigation the effect of In-doping on the structural and optical properties of electrodeposited SnS thin film [Volume 8, Issue 32, 2018, Pages 43-56]
  • Optical Properties Synthesis and Investigation of Optical and Photocatalytic properties of ZnO nanoparticles co-doped with Ti/Si [Volume 8, Issue 32, 2018, Pages 71-82]
  • Optical Properties Study of optical properties, thermal behavior and thermal stability of coated PETN particles with Lithol rubine nano-pigment via ultrasonic technique using Taguchi experimental design method [Volume 10, Issue 35, 2019, Pages 63-76]
  • Optimization Cation Distribution, Structural Parameters and Magnetic Moment in the Spinel Structure of Li-Zn Ferrite Prepared by Glycine-Nitrate Process [Volume 4, Issue 16, 2014, Pages 43-56]
  • Organic-Inorganic Nanohybrid Production of Porous Carbon Nanoparticles by Usingzinc Layered Gallate Nanohybrid Precursors and Investigate Its Aapplications as Polymeric Fuel Cell Cathode Catalyst [Volume 6, Issue 22, 2016, Pages 111-126]
  • Oxidation A Survey of Mechanism and Kinetic of Oxidation of Welding Lines in Austenitic Stainless Steel AISI321 [Volume 6, Issue 21, 2016, Pages 109-120]
  • Oxidation Effect of MCrAlY coating on crack formation during thermal fatigue testing of a directionally solidified Nickle based superalloy [Volume 13, Issue 50, 2022, Pages 81-97]
  • Oxide mixture Investigation of Phase Evolution of CoFe2O4 Nanoparticles Prepared by limited Mechanical Activation and Heat Treatment in Comparison to Conventional Powder Metallurgy Route [Volume 4, Issue 14, 2014, Pages 31-40]
  • Oxide Voids Effect of MCrAlY coating on crack formation during thermal fatigue testing of a directionally solidified Nickle based superalloy [Volume 13, Issue 50, 2022, Pages 81-97]
  • Oxime Preysler polyoxometalate supported on functionalized graphene oxide nanoparticles: synthesis, identification and investigation of its catalytic activity [Volume 14, Issue 54, 2023, Pages 1-16]
  • Oxygen plasma Comparison of oxygen and nitrogen plasmas for production of nano-composite layers of alumina and aluminium [Volume 7, Issue 27, 2016, Pages 57-66]

P

  • PA6 The effect of calcium carbonate particles on the wear behavior of nano-composite gear PA6/PP/Nano CaCO3 [Volume 6, Issue 24, 2016, Pages 95-106]
  • PACVD Investigation of structure and tribological behavior of nanostructured DLC coating, deposited by PACVD and Arc-PVD processes [Volume 8, Issue 30, 2018, Pages 87-104]
  • Paint Adhesion A Study on the Effect of Mechanical Activating of Plain Carbon Steel Surface on the Protection Properties of Applied Zinc Phosphate Coating and Paint Adhesion Improvement [Volume 4, Issue 15, 2014, Pages 51-66]
  • Paint Adhesion Comparison of properties of zinc, zinc/nickel, zinc/nickel/manganese phosphate coatings on 41Cr4 steel substrate [Volume 14, Issue 53, 2023, Pages 53-68]
  • Partially austenitizing time Production of machinable ferritic-ausferritic ADI by selection of proper partially austenitizing time [Volume 10, Issue 36, 2019, Pages 93-106]
  • Particles Size Effect of pH on Production Process and Characteristics of Zirconium Carbide Nano Particles Synthesized by Sol-Gel Method [Volume 7, Issue 25, 2016, Pages 1-12]
  • PEDOT:PSS Investigating Nanocomposite thin Film of PEDOT: PSS/SnO2 as CO gas Sensor [Volume 4, Issue 14, 2014, Pages 55-66]
  • PEO Study of PEO on the fatigue behavior of titanium alloy Ti-6Al-4V [Volume 8, Issue 31, 2018, Pages 141-152]
  • PEO Investigation on the effect of frequency and duty cycle on nano-crystalline TiO2 coatings produced by plasma electrolytic oxidation [Volume 9, Issue 33, 2018, Pages 37-52]
  • Permeability Microstructure Evaluation of Acrylonitril-Butadiene Copolymer Nanocomposites Reinforced by Nano-Calcium Carbonate by Permeability Test [Volume 6, Issue 22, 2016, Pages 29-44]
  • Permeability Structure, Microstructure, Magnetic and Electromagnetic Properties Ni-Mn-Zn Ferrite Produced by Glycine-Nitrate Process [Volume 7, Issue 27, 2016, Pages 45-56]
  • Perovskite Synthesis, Characterization and investigation of removal process of methylene blue dye by perovskite-type oxides nanoparticles La0.9Sr0.1FeO3 [Volume 10, Issue 35, 2019, Pages 145-168]
  • Perovskite Synthesis of strontium titanate from celestite concentrate [Volume 10, Issue 37, 2019, Pages 105-118]
  • Perovskite Application of Graphene Oxide Quantum Dots in Planar Perovskite Solar Cell [Volume 12, Issue 44, 2021, Pages 53-64]
  • PETN Study of optical properties, thermal behavior and thermal stability of coated PETN particles with Lithol rubine nano-pigment via ultrasonic technique using Taguchi experimental design method [Volume 10, Issue 35, 2019, Pages 63-76]
  • Pharmaceutical emission Study on the capacity of medicinal intake and release of the polymeric polyurethane and biological parts of pomegranate fruit nanocomposite [Volume 13, Issue 47, 2022, Pages 71-90]
  • Phase Transformation Investigation of Phase Evolution of CoFe2O4 Nanoparticles Prepared by limited Mechanical Activation and Heat Treatment in Comparison to Conventional Powder Metallurgy Route [Volume 4, Issue 14, 2014, Pages 31-40]
  • Phase Transformation Study of Phase Transformation in Martensitic Stainless Steel AISI 422 During Continuous Cooling [Volume 6, Issue 22, 2016, Pages 79-90]
  • Phase transformations The finite element analysis of applying the controlling pouer on the surface transformation hardening in the vicinity of discontinuity in the workpiece depth [Volume 7, Issue 26, 2016, Pages 1-18]
  • Phosphoric Acid Evaluation of Metoral pill as an effective and novel inhibitor for corrosion of mild steel in acidic media [Volume 9, Issue 34, 2018, Pages 133-146]
  • Photoanode Investigation of electrophoretic parameters of TiO2 nanoparticles for fabricating photoanode of dye sensitized solar cells [Volume 9, Issue 33, 2018, Pages 13-24]
  • Photocatalyst Synthesis of g-C3N4/Au nanocomposite as a photocatalyst for hydrogen generation [Volume 10, Issue 38, 2019, Pages 67-78]
  • Photocatalyst Optimization of Photocatalytic Degradation of Cephalexin Drug Contaminant from Aqueous Solutions by Synthesized Zn-MOC Nanostructures Using Response Surface Methodology [Volume 12, Issue 43, 2021, Pages 94-108]
  • Photocatalytic Photocatalytic degradation of reactive red 198 by TiO2-activated carbon nanocomposite [Volume 7, Issue 26, 2016, Pages 35-48]
  • Photocatalytic degradation Synthesis and Investigation of Optical and Photocatalytic properties of ZnO nanoparticles co-doped with Ti/Si [Volume 8, Issue 32, 2018, Pages 71-82]
  • Photocatalytic degradation Growth and investigation of magnetic and optical properties of Fe3O4@CuO core-shell nanostructures [Volume 9, Issue 34, 2018, Pages 155-164]
  • Photo-Electrical Properties Deposition, Characterization and Investigation of Photo-Electrical Properties of Nanostructured Thin Film Mg Doped ZnO by Sol-Gel Method [Volume 11, Issue 40, 2021, Pages 107-124]
  • Pin shape The effect of pin shape on microstructure and mechanical properties of HA-Ti surface composites produced by FSP method [Volume 14, Issue 52, 2023, Pages 73-87]
  • Pipeline coating Evaluation of anti-corrosion properties of MIO pigments in the formulation of synthetic rubber based primer used in gas pipeline [Volume 8, Issue 29, 2018, Pages 109-120]
  • Pipeline integrity management system Implementation of integrity Management System for Gas Transmission Pipelines in South Zagros Region Based on ASME B31.8s [Volume 13, Issue 49, 2022, Pages 14-1]
  • Plain Carbon Steel A Study on the Effect of Mechanical Activating of Plain Carbon Steel Surface on the Protection Properties of Applied Zinc Phosphate Coating and Paint Adhesion Improvement [Volume 4, Issue 15, 2014, Pages 51-66]
  • Planar Structure Application of Graphene Oxide Quantum Dots in Planar Perovskite Solar Cell [Volume 12, Issue 44, 2021, Pages 53-64]
  • Planetary ball mill Fabrication of AZ91D/SiC Magnesium Matrix Composite with High Particle Reinforcement Loading, Produced by Mechanical Milling of Chips and Semi-Solid Powder Processing [Volume 10, Issue 36, 2019, Pages 17-32]
  • Planetary Mill Investigation of Effect of Milling Time on Final Microstructure of Nanocrystalline TiB2-TiC Powder Fabricated by MACS Method [Volume 5, Issue 17, 2014, Pages 15-26]
  • Plasma arc discharge process Investigation of Structure and Magnetic Properties of Ni Ferrite Powders Synthesized by Plasma Arc Discharge [Volume 7, Issue 28, 2016, Pages 17-26]
  • Plasma Arc Welding An Investigation of different parameters on the penetration depth and welding width of Ti-6Al-4V alloy by plasma arc welding [Volume 10, Issue 38, 2019, Pages 33-48]
  • Plasma electrolytic oxidation Investigating the effect of silicon content on structure and corrosion resistance by plasma electrolytic oxidation on aluminum-silicon alloys [Volume 14, Issue 53, 2023, Pages 21-34]
  • Plasma Electrolytic Oxidation (PEO) Applying Titania and Hydroxyapatite coating on Ti-6Al-4V by PEO and hydrothermal processes and investigating its corrosion behavior in simulated body environment [Volume 1, Issue 1, , Pages 1-10]
  • Plasma Electrolytic Oxidation (PEO) Experimental investigation of the efficiency of deposited TiO2 on porous aluminum in pollutant removal: a comparison between PEO and anodizing methods [Volume 10, Issue 38, 2019, Pages 95-108]
  • Plasma Electrolytic Saturation Investigation of Zinc metallic coating properties formed on low carbon steel in alkaline and sulfate electrolytes by plasma electrolytic saturation [Volume 6, Issue 23, 2016, Pages 1-18]
  • Plasma؛ Plasma spray Comparison of oxygen and nitrogen plasmas for production of nano-composite layers of alumina and aluminium [Volume 7, Issue 27, 2016, Pages 57-66]
  • Plasma torch coating Comparison of oxygen and nitrogen plasmas for production of nano-composite layers of alumina and aluminium [Volume 7, Issue 27, 2016, Pages 57-66]
  • Plasticizer Investigation of Role of both Nucleating Agent and Plasticizer on Physical, Mechanical and Thermal Properties of Poly(Lactic Acid) [Volume 6, Issue 21, 2016, Pages 53-60]
  • Polarization Inhibition of Copper Corrosion by Self-Assembled Thin Films of Schiff Bases in Acidic Media  [Volume 5, Issue 17, 2014, Pages 83-94]
  • Polarization Investigation of Zinc metallic coating properties formed on low carbon steel in alkaline and sulfate electrolytes by plasma electrolytic saturation [Volume 6, Issue 23, 2016, Pages 1-18]
  • Polarization Test Investigation of corrosion behavior nanocrystalline Nickel-Cobalt coating by electrodeposition [Volume 1, Issue 1, , Pages 51-60]
  • Polarization Test The Effect of Annealing Temperature on The Structure and Corrosion Behavior of Nano-Quasicrystalline Al72Ni13Cr15 alloy Synthesized by Mechanical Alloying [Volume 6, Issue 21, 2016, Pages 161-176]
  • Polyacrylonitrile Investigation of Morphology and production efficiency of Produced Nano-Fibers with multi-nozzle electrospinning process [Volume 9, Issue 33, 2018, Pages 97-112]
  • Polycaprolactone Synthesis and characterization of tissue engineering network scaffold composed of polycaprolactone diol / polyethyleneglycol / hydroxyapatite [Volume 10, Issue 37, 2019, Pages 33-46]
  • Polyethylene Study of Scratch Resistance of Polyethylene and its Composite Reinforced with Nano-Sized Calcium Carbonate [Volume 4, Issue 14, 2014, Pages 79-92]
  • Polyethylene Investigating the simultaneous role of clay nanoparticles and strain rate on the tensile behavior of polyethylene matrix nanocomposite [Volume 13, Issue 50, 2022, Pages 23-45]
  • Polyethylene glycol Synthesis and characterization of tissue engineering network scaffold composed of polycaprolactone diol / polyethyleneglycol / hydroxyapatite [Volume 10, Issue 37, 2019, Pages 33-46]
  • Poly(Lactic Acid) Investigation of Role of both Nucleating Agent and Plasticizer on Physical, Mechanical and Thermal Properties of Poly(Lactic Acid) [Volume 6, Issue 21, 2016, Pages 53-60]
  • Polymeric Fuel Cell Production of Porous Carbon Nanoparticles by Usingzinc Layered Gallate Nanohybrid Precursors and Investigate Its Aapplications as Polymeric Fuel Cell Cathode Catalyst [Volume 6, Issue 22, 2016, Pages 111-126]
  • Polyol Optimizing synthesis parameters of silver nanowires by polyol method [Volume 12, Issue 45, 2021, Pages 21-32]
  • Polypropylene The effect of calcium carbonate particles on the wear behavior of nano-composite gear PA6/PP/Nano CaCO3 [Volume 6, Issue 24, 2016, Pages 95-106]
  • Polyurethane Investigation of the Effect of Strain Rate on Tensile Properties of Polyurethane Using Eyring Model [Volume 7, Issue 25, 2016, Pages 23-30]
  • Polyurethane Study on the capacity of medicinal intake and release of the polymeric polyurethane and biological parts of pomegranate fruit nanocomposite [Volume 13, Issue 47, 2022, Pages 71-90]
  • Polyurethane foam Production of Open Cell Copper Foam and assessment of foam Substructure [Volume 8, Issue 31, 2018, Pages 1-16]
  • Polyurethane foam Production of Open Cell Copper Foam and assessment of foam Substructure [Volume 8, Issue 31, 2018, Pages 179-191]
  • Polyvinyl Chloride (PVC) - Styrene Acrylonitrile (SAN) - nanoparticals- silver- titanium dioxide - Casting Preparation of UPVC/ SAN/Ag-TiO2 nanocomposite by casting method and characterization of its physical and mechanical properties [Volume 7, Issue 25, 2016, Pages 87-100]
  • Polyvinylidene fluoride An Investigation on the Effect of Barium Titanate Nanoparticles on the Properties of Electrospun PVDF Fibers [Volume 13, Issue 47, 2022, Pages 39-52]
  • Porous nano particles Synthesis of porous hydroxyapatite nano particles via sol-gel route by using different organic polymers [Volume 11, Issue 41, 2021, Pages 49-62]
  • Porous Scaffold Synthesis and characterization of tissue engineering network scaffold composed of polycaprolactone diol / polyethyleneglycol / hydroxyapatite [Volume 10, Issue 37, 2019, Pages 33-46]
  • Porous structure Investigation on the effect of frequency and duty cycle on nano-crystalline TiO2 coatings produced by plasma electrolytic oxidation [Volume 9, Issue 33, 2018, Pages 37-52]
  • Potentiodynamic Polarisation An Investigation on Stress Corrosion Cracking Behaviorof API-5L-X52 Steel in Near Neutral pH Solution [Volume 5, Issue 17, 2014, Pages 55-64]
  • Potentiodynamic Polarization Investigation on Effect of Aluminum on the Corrosion Resistance of Hadfield Austenitic Manganese Steel [Volume 7, Issue 27, 2016, Pages 1-14]
  • Potentiodynamic Polarization Effect of sodium carbonate additive on corrosion behavior of nitrocarburized coating by cathodic plasma electrolytic [Volume 9, Issue 33, 2018, Pages 67-76]
  • Potentiodynamic Polarization Evaluation of Metoral pill as an effective and novel inhibitor for corrosion of mild steel in acidic media [Volume 9, Issue 34, 2018, Pages 133-146]
  • Pressureless Sintering Thermodynamic Analysis of Pressureless Sintering of B4C-Si Nano Composite by Factsage Software [Volume 4, Issue 15, 2014, Pages 79-90]
  • Preysler Preysler polyoxometalate supported on functionalized graphene oxide nanoparticles: synthesis, identification and investigation of its catalytic activity [Volume 14, Issue 54, 2023, Pages 1-16]
  • Propargite Removal Propargite pesticide from aqueous solution using Penta Aza Tetra Ethylene on Polyacrylamide (PAA-N5) as a novel adsorbent [Volume 10, Issue 38, 2019, Pages 109-124]
  • Properties Investigation of Role of both Nucleating Agent and Plasticizer on Physical, Mechanical and Thermal Properties of Poly(Lactic Acid) [Volume 6, Issue 21, 2016, Pages 53-60]
  • Protectiveoxide Layer An Investigation of Flow Accelerated(assisted) Erosion-Corrosion in High Pressure Economizer Tubes(HP-EC) of Boiler Unite 1 at Kerman Combined Cycle Power Plant [Volume 5, Issue 17, 2014, Pages 65-81]
  • PSF hollow fiber membrane Fabrication and characterization of developed polysulfone hollow fiber membranes for dehydration of gas streams via gas-liquid membrane contactor [Volume 11, Issue 40, 2021, Pages 45-58]
  • PTFE Electroless Deposition of Ni-P/nanoPTFE Composite Coating and Investigation of Its Properties [Volume 6, Issue 21, 2016, Pages 61-72]
  • PTFE Particles Investigation of the Synergistic Effect of Soft and Hard Particles on Corrosion and Wear Resistance Behavior of Ni-B-PTFE-Si3N4 Electroless Coating on Carbon Steel [Volume 12, Issue 43, 2021, Pages 1-22]
  • PU The effects of TiO2 nanoparticles on physical and thermal properties of polyurethane foam and sandwich panel [Volume 8, Issue 29, 2018, Pages 91-108]
  • Pulsed MIG Effect of heat input on microstructure, mechanical properties and corrosion behavior of 5083-H321 aluminum alloy welded joint using P-MIG process [Volume 7, Issue 28, 2016, Pages 1-16]
  • PVA Hydroxyapatite - Hyaluronic acid scaffold production using solvent extraction method [Volume 10, Issue 36, 2019, Pages 133-140]

Q

  • QFA Hardness Prediction in the Ni-Based Superalloy GTD-111 Using Quench Factor Analysis (QFA) [Volume 8, Issue 31, 2018, Pages 41-50]
  • Quantum Chemical Calculations An Experimental and Simulational Investigation on Schiff-base Complex of Cobalt and Corresponding Ligand as Corrosion Inhibitor in Acidic Solution [Volume 5, Issue 17, 2014, Pages 127-140]
  • Quantum Dot Application of Graphene Oxide Quantum Dots in Planar Perovskite Solar Cell [Volume 12, Issue 44, 2021, Pages 53-64]
  • Quasicrystal nano-particles Production of Aluminum metal matrix composite reinforced with Al-Cr-Fe quasicrystal nano-powder by using accumulative roll bonding process and investigation mechanical properties [Volume 12, Issue 44, 2021, Pages 29-40]
  • Quasi-Static Perforation Investigation and Simulation of Quasi-Static Perforation Test on Sandwich Panels with Al A356/SiCp Composite Foam Core [Volume 6, Issue 22, 2016, Pages 13-28]
  • Quench Factor Analysis Hardness Prediction in the Ni-Based Superalloy GTD-111 Using Quench Factor Analysis (QFA) [Volume 8, Issue 31, 2018, Pages 41-50]
  • Quenching Investigation on the Effects of Using Salt Water Bathroom Quenching on the Corrosion Behavior of Hadfield Manganese Steel [Volume 6, Issue 24, 2016, Pages 29-38]

R

  • Radical polymerization Synthesis and Characterization of Temperature‐Sensitive Hydrogel Copolymer Based on N-isopropylacrylamide for Medical Applications [Volume 7, Issue 27, 2016, Pages 15-26]
  • Raman spectroscopy Graphene nanosheets film by plasma electrolysis deposition [Volume 7, Issue 26, 2016, Pages 75-84]
  • Random Distribution Statistical Micromechanical Analysis of the Effects of Fiber Random Distribution on the Mechanical Properties of Fibrous Composites [Volume 6, Issue 21, 2016, Pages 137-160]
  • Reactive red 198 Photocatalytic degradation of reactive red 198 by TiO2-activated carbon nanocomposite [Volume 7, Issue 26, 2016, Pages 35-48]
  • Recrystallization The effect of temperature on microstructure during ultra-rapid annealing of severely deformed low-carbon steel [Volume 11, Issue 40, 2021, Pages 1-12]
  • Refractories Hydration Resistance Improvement of MgO-CaO Refractories by the Addition of Nano-ZrO2 [Volume 7, Issue 28, 2016, Pages 135-148]
  • Regenerator tower Corrosion assessment of Amine regenerator column of SPGC using process simulation in gas sweetening unit to mitigate corrosion rate by controlling process parameters [Volume 10, Issue 37, 2019, Pages 91-104]
  • Reinforcement Experimental Study on Creep Behavior of Al2024/SiC Composite Produced via Accumulative Roll Bonding (ARB) Process [Volume 8, Issue 31, 2018, Pages 153-166]
  • Residual Stress The Experimental and Numerical Evaluation of the Residual Stress in the Hot Forming Sheet Process for 5083 Aluminum via the Gas Blowing Process [Volume 7, Issue 25, 2016, Pages 13-22]
  • Resistance to Wear Microstructure, Hardness and Wear Resistance of the Hard Layer Containing Silicon Carbide Particles on ASTM A106 Steel Produced by GTAW Welding [Volume 6, Issue 21, 2016, Pages 121-136]
  • Resistance Welding Investigation of High Frequency Resistance Welding (HFRW) Variables on microstructure and mechanical properties of dissimilar joints between chromium-molybdenum low alloy steel tubes to chromium high alloy steels [Volume 11, Issue 39, 2021, Pages 1-15]
  • Response surface methods Optimization of Photocatalytic Degradation of Cephalexin Drug Contaminant from Aqueous Solutions by Synthesized Zn-MOC Nanostructures Using Response Surface Methodology [Volume 12, Issue 43, 2021, Pages 94-108]
  • Retained Austenite The effect of deep cryogenic treatment on the hardness and wear behavior of Din 1.2344 tool steel [Volume 7, Issue 26, 2016, Pages 105-118]
  • Rheological behavior Investigating the Rheological Behavior of Silicon Carbide Gel Casting Suspensions and its Effect on the Silicon Carbide Bodies [Volume 10, Issue 35, 2019, Pages 77-88]
  • Rhodamine 6G Experimental investigation of the efficiency of deposited TiO2 on porous aluminum in pollutant removal: a comparison between PEO and anodizing methods [Volume 10, Issue 38, 2019, Pages 95-108]
  • Rice Husk Synthesis and Characterization of Activated Carbon from Rice husk [Volume 11, Issue 40, 2021, Pages 125-136]
  • Rietveld Cation Distribution, Structural Parameters and Magnetic Moment in the Spinel Structure of Li-Zn Ferrite Prepared by Glycine-Nitrate Process [Volume 4, Issue 15, 2014, Pages 91-102]
  • Risk Assessment Implementation of integrity Management System for Gas Transmission Pipelines in South Zagros Region Based on ASME B31.8s [Volume 13, Issue 49, 2022, Pages 14-1]
  • RMS test design Application of the response surface method in optimizing the thickness and hardness of vanadium carbide coatings created by the electrolytic plasma method [Volume 9, Issue 34, 2018, Pages 111-120]
  • Root Cause Analysis Root Cause Analysis of Water-Cooled Exhaust Manifold in High Speed Marine Diesel Engine [Volume 11, Issue 42, 2021, Pages 1-16]
  • Rosa cannina Biosynthesis of silver nanopowders and evaluation on their application in cosmetic products [Volume 8, Issue 29, 2018, Pages 69-80]
  • Roughness Electroless Deposition of Ni-P/nanoPTFE Composite Coating and Investigation of Its Properties [Volume 6, Issue 21, 2016, Pages 61-72]
  • Rutile Effect of metallic agent on the carbothermic reduction of titanium dioxide in order to produce titanium carbide [Volume 12, Issue 44, 2021, Pages 65-82]

S

  • Sample’s mass Aluminothermic Reduction of Khatoon Abad Molybdenum Trioxide in Microwave: Investigation on the Effect of Aluminum Particle Size and Scale-up on the Reduction Process [Volume 11, Issue 40, 2021, Pages 91-106]
  • Sandwich Panel Enzyme absorption rate of sandwich panels with aluminum foam core under the sky of drilling [Volume 3, Issue 10, , Pages 25-38]
  • Sandwich Panel Investigation and Simulation of Quasi-Static Perforation Test on Sandwich Panels with Al A356/SiCp Composite Foam Core [Volume 6, Issue 22, 2016, Pages 13-28]
  • Sandwich Panel An investigation on the effect of adhesive bonding strength on bending behavior of sandwich panels with Al A356/SiCp composite foam core [Volume 7, Issue 27, 2016, Pages 85-94]
  • Saturation Magnetization Structure, Microstructure, Magnetic and Electromagnetic Properties Ni-Mn-Zn Ferrite Produced by Glycine-Nitrate Process [Volume 7, Issue 27, 2016, Pages 45-56]
  • Saturation Magnetization Investigation of Structure and Magnetic Properties of Ni Ferrite Powders Synthesized by Plasma Arc Discharge [Volume 7, Issue 28, 2016, Pages 17-26]
  • Scaffold Hydroxyapatite - Hyaluronic acid scaffold production using solvent extraction method [Volume 10, Issue 36, 2019, Pages 133-140]
  • Scanning electron microscopy Influence of filler metal on the microstructure of dissimilar welds between UNS S32205 duplex stainless steel and ASTM A517 Quench and tempered steel [Volume 8, Issue 30, 2018, Pages 125-138]
  • Scanning electron microscopy Synthesis and Characterization of Nanoparticles of Magnesium-Copper Oxide with Paramagnetic Properties [Volume 8, Issue 30, 2018, Pages 163-172]
  • Scanning Tunneling Microscope The Effect of Annealing Temperature on The Structure and Corrosion Behavior of Nano-Quasicrystalline Al72Ni13Cr15 alloy Synthesized by Mechanical Alloying [Volume 6, Issue 21, 2016, Pages 161-176]
  • Scratch Study of Scratch Resistance of Polyethylene and its Composite Reinforced with Nano-Sized Calcium Carbonate [Volume 4, Issue 14, 2014, Pages 79-92]
  • Segregated Structure The effect of carbon nanotube surface modification on conductivity behavior of carbon nanotube reinforced polythene matrix hybrid HDPE composite with segregate structure [Volume 13, Issue 49, 2022, Pages 57-71]
  • Selective laser melting Investigating on the microstructure of cross-section and surface of Ti-10Mo alloy produced by selective laser melting [Volume 14, Issue 53, 2023, Pages 1-20]
  • Self-assembled inhibitor, Imidazole, Hybrid Coatings, Carbon steel، The performance of self-assembled thin film of imidazole used in organic-inorganic hybrid coating on ‎corrosion inhibition of carbon steel in acidic solution [Volume 6, Issue 23, 2016, Pages 61-74]
  • Self Assembled Mono Layers Inhibition of Copper Corrosion by Self-Assembled Thin Films of Schiff Bases in Acidic Media  [Volume 5, Issue 17, 2014, Pages 83-94]
  • Self-flow The effect of nano-alumina addition on the properties of high-alumina low-cement self-flowing refractory castables [Volume 8, Issue 29, 2018, Pages 29-42]
  • Self-propagating high-temperature synthesis Effect of TiC and TiB2 Reinforcement Phase Addition on Mechanical and Tribological Properties of NiAl-TiC-TiB2 Composite Produced Through Combustion Synthesis Process [Volume 12, Issue 44, 2021, Pages 41-52]
  • Self-propagation high-Temperature synthesis (SHS) Investigation on the effects of the amount and source of carbon on synthesis of Ti2AlC nanostructure by self-propagating high temperature combustion synthesis method [Volume 8, Issue 29, 2018, Pages 57-68]
  • SEM An Experimental and Simulational Investigation on Schiff-base Complex of Cobalt and Corresponding Ligand as Corrosion Inhibitor in Acidic Solution [Volume 5, Issue 17, 2014, Pages 127-140]
  • Semi-solid forming Comparison of microstructures and mechanical properties of Al 7075 alloy obtained from conventional modified SIMA processes [Volume 8, Issue 32, 2018, Pages 149-158]
  • Semi-solid powder processing Fabrication of AZ91D/SiC Magnesium Matrix Composite with High Particle Reinforcement Loading, Produced by Mechanical Milling of Chips and Semi-Solid Powder Processing [Volume 10, Issue 36, 2019, Pages 17-32]
  • Sensitivity Effect of Various Heat Treatment Conditions on Nickel Ferrite Nanoparticles and Investigating its Sensitivity to Formaldehyde [Volume 11, Issue 42, 2021, Pages 17-30]
  • Serrated alpha An Investigation of different parameters on the penetration depth and welding width of Ti-6Al-4V alloy by plasma arc welding [Volume 10, Issue 38, 2019, Pages 33-48]
  • Severe plastic deformation Microstructure and Mechanical Properties of Plain Low Carbon Steel Processed by Integrated Extrusion and Equal Channel Angular Pressing (Ex-ECAP) [Volume 6, Issue 22, 2016, Pages 55-64]
  • Severe plastic deformation The effect of severe plastic deformation on the natural ageing behavior of aluminum alloy 2024 [Volume 6, Issue 23, 2016, Pages 39-46]
  • Severe plastic deformation Effect of severe plastic deformation process on mechanical properties of 1.7225 Steel [Volume 11, Issue 41, 2021, Pages 35-48]
  • Severe plastic deformation Production of Aluminum metal matrix composite reinforced with Al-Cr-Fe quasicrystal nano-powder by using accumulative roll bonding process and investigation mechanical properties [Volume 12, Issue 44, 2021, Pages 29-40]
  • Severe plastic deformation A Review of the Most Important Methods for Severe Plastic Deformation of Titanium [Volume 14, Issue 52, 2023, Pages 19-41]
  • Sewage Investigating the effect of using colors containing copper oxide and zinc oxide (zinc-rich) on microbial corrosion behavior of sewage pipes [Volume 10, Issue 35, 2019, Pages 15-26]
  • Shahid Mofateh power plant Detection and Analysis of Microbial Influenced Corrosion in Cooling Tower of Shahid Mofateh Power Plant [Volume 13, Issue 50, 2022, Pages 46-59]
  • Shear stress The Effect of Fiber Breakage Caused by Transient Shear Stress Distribution in Single-Lap Adhesive Joint Composite Material [Volume 6, Issue 21, 2016, Pages 1-18]
  • Sheet resistance Optimizing synthesis parameters of silver nanowires by polyol method [Volume 12, Issue 45, 2021, Pages 21-32]
  • Si3N4 Effect of nano Si3N4، Al2O3 و AlMg and cold rolling process on the microstructural and mechanical properties of AL-6061alloy [Volume 10, Issue 35, 2019, Pages 115-128]
  • Si3N4 nanoparticles Investigation of the Synergistic Effect of Soft and Hard Particles on Corrosion and Wear Resistance Behavior of Ni-B-PTFE-Si3N4 Electroless Coating on Carbon Steel [Volume 12, Issue 43, 2021, Pages 1-22]
  • Si/Al Effect Effect of Si/Al Ratio on Physicochemical Properties of Nanostructured LaAPSO-34 for Conversion of Methanol to Light Olefins [Volume 6, Issue 22, 2016, Pages 91-110]
  • Silica Investigation of microstructure and wear resistance of AZ31B/SiO2/graphite hybrid surface composite produced by friction stir processing (FSP) [Volume 10, Issue 37, 2019, Pages 47-62]
  • Silica Synthesis and Characterization of Activated Carbon from Rice husk [Volume 11, Issue 40, 2021, Pages 125-136]
  • Silica Synthesis Characterization of Silica Nanoparticles and Nanocolloid Synthesized in Acidic and Alkaline Media [Volume 12, Issue 43, 2021, Pages 56-69]
  • Silicon carbide Investigating the Rheological Behavior of Silicon Carbide Gel Casting Suspensions and its Effect on the Silicon Carbide Bodies [Volume 10, Issue 35, 2019, Pages 77-88]
  • Silicon carbide coating Investigation of SiC graded coating formation mechanism on graphite by pack cemetation process and influenece of types of raw material [Volume 7, Issue 28, 2016, Pages 39-46]
  • Silver Synthesis and Evaluation of Antibacterial Activity of Silver-Doped Titania Nanoparticles as an Antibacterial Additive to Dental Materials [Volume 4, Vol.4/No.13/Autumn 2013, 2014, Pages 21-34]
  • Silver conductive line Fabrication of silver conductive lines by spray deposition method [Volume 14, Issue 53, 2023, Pages 91-102]
  • Silver Nanoparticles Investigation of Antibacterial Properties of Silver Nanoparticles and Polyethylene-Silver Nanocomposites [Volume 6, Issue 22, 2016, Pages 159-168]
  • Silver Nanoparticles The Effect of Silver Nanoparticles on AC Magnetic Susceptibility of High Temperature Y123 Superconductor [Volume 12, Issue 45, 2021, Pages 95-110]
  • Silver nanowires Optimizing synthesis parameters of silver nanowires by polyol method [Volume 12, Issue 45, 2021, Pages 21-32]
  • SIMA Comparison of microstructures and mechanical properties of Al 7075 alloy obtained from conventional modified SIMA processes [Volume 8, Issue 32, 2018, Pages 149-158]
  • Simple shear extrusion A Review of the Most Important Methods for Severe Plastic Deformation of Titanium [Volume 14, Issue 52, 2023, Pages 19-41]
  • Simulation Evaluation of microsegregation during dendritic solidification of a binary alloy using phase field method and analytical models [Volume 1, Issue 1, , Pages 71-80]
  • Simulation Corrosion assessment of Amine regenerator column of SPGC using process simulation in gas sweetening unit to mitigate corrosion rate by controlling process parameters [Volume 10, Issue 37, 2019, Pages 91-104]
  • Simulation Effect of the power type of the general flow function in texture simulation of ECAP [Volume 12, Issue 44, 2021, Pages 13-28]
  • Single phase- morphology Synthesis and Characterization of Nanoparticles of Magnesium-Copper Oxide with Paramagnetic Properties [Volume 8, Issue 30, 2018, Pages 163-172]
  • Sintering An Studying on the Synthesis and Densification Behavior of β''- Alumina Electrolyte for Sodium-Sulfur Batteries [Volume 6, Issue 22, 2016, Pages 137-146]
  • Sintering temperature The Effect of Milling Time and Sintering Temperature on the Microstructure and Mechanical Properties of Al/20% SiC Composite Prepared by Powder Metallurgy [Volume 6, Issue 22, 2016, Pages 147-158]
  • Sintering temperature Investigating the behavior of compressive strength and abrasion resistance of the floor tile at different sintering temperatures [Volume 10, Issue 37, 2019, Pages 63-74]
  • SiO2 -Al2O3 Synthesis and Characterization of ZnO Nanocrystal Composites with High Surface Area Supported on Silica-Alumina Matrix by Sol-gel [Volume 4, Vol.4/No.13/Autumn 2013, 2014, Pages 1-12]
  • Si/Ti dopant Synthesis and Investigation of Optical and Photocatalytic properties of ZnO nanoparticles co-doped with Ti/Si [Volume 8, Issue 32, 2018, Pages 71-82]
  • Slow Strain Rate Test An Investigation on Stress Corrosion Cracking Behaviorof API-5L-X52 Steel in Near Neutral pH Solution [Volume 5, Issue 17, 2014, Pages 55-64]
  • Slug Catcher Stress and Fracture Analysis of a Fitting in Slug Catcher of Gas Refinery [Volume 7, Issue 27, 2016, Pages 95-112]
  • SMAW butt Welded Joints Effect of Ultrasonic Impact Treatment on Fatigue Behavior of Steel Welded Pipes in Petrochemical Corrosive Environment [Volume 6, Issue 21, 2016, Pages 83-96]
  • SMAW Welding Investigating the effect of degree of dilution and interlayer on the abrasion resistance of the hard-wired coated layer of Fe-Cr-C based on SMAW method on plane carbon steel [Volume 11, Issue 40, 2021, Pages 133-32]
  • Soda- lime Glass Investigating the effect of replacing CaO with CaF2 on bioactivity and compressive strength of 45S5 glass ceramic synthesized from soda-lime glass waste by solid state method [Volume 14, Issue 51, 2023, Pages 39-57]
  • Sodalime Glass Investigation of Effect of Heat Treatment on Produced Phases in 45S5 Glass-Ceramics Synthesized in the Forms of Powder and Pellet, and Investigation of Their Bioactivity [Volume 9, Issue 34, 2018, Pages 1-16]
  • Sodium beta-alumina Investigating the effect of particle size on microstructure, mechanical properties and electrical conductivity of sodium beta-alumina ceramics [Volume 10, Issue 36, 2019, Pages 107-116]
  • Sodium Hexametaphosphate The Effect of Sodium Hexametaphosphate on the Physical and Mechanical Properties of Monolithic Refractories Prepared from the Wastes of Magnesia - Carbon Bricks [Volume 6, Issue 22, 2016, Pages 45-54]
  • Sodium sulfate A review on the extraction of lithium from its minerals - Case study: Lithium extraction from spodumene concentrate using sulfation roasting under ball milling conditions [Volume 11, Issue 40, 2021, Pages 75-90]
  • Solar Cell Application of Graphene Oxide Quantum Dots in Planar Perovskite Solar Cell [Volume 12, Issue 44, 2021, Pages 53-64]
  • Solar Cell Synthesis and direct ink writing of silver ink for fabricating current collecting lines of dye sensitized solar cells [Volume 13, Issue 49, 2022, Pages 41-56]
  • Sol – Gel Taguchi Statistical Method to Optimize the Experimental Conditions for the Nano Hydroxyapatite Production by Sol – Gel Method [Volume 4, Issue 15, 2014, Pages 1-10]
  • Sol-Gel Synthesis and Characterization of ZnO Nanocrystal Composites with High Surface Area Supported on Silica-Alumina Matrix by Sol-gel [Volume 4, Vol.4/No.13/Autumn 2013, 2014, Pages 1-12]
  • Sol-Gel Effect of pH on Production Process and Characteristics of Zirconium Carbide Nano Particles Synthesized by Sol-Gel Method [Volume 7, Issue 25, 2016, Pages 1-12]
  • Sol-Gel Synthesis and Study of Properties of Bioactive Glass (45S)/TiO2/Fluorapatite Nanocomposite [Volume 8, Issue 32, 2018, Pages 73-96]
  • Sol-Gel Synthesis, Characterization and investigation of removal process of methylene blue dye by perovskite-type oxides nanoparticles La0.9Sr0.1FeO3 [Volume 10, Issue 35, 2019, Pages 145-168]
  • Sol-Gel Deposition, Characterization and Investigation of Photo-Electrical Properties of Nanostructured Thin Film Mg Doped ZnO by Sol-Gel Method [Volume 11, Issue 40, 2021, Pages 107-124]
  • Sol-Gel Synthesis of porous hydroxyapatite nano particles via sol-gel route by using different organic polymers [Volume 11, Issue 41, 2021, Pages 49-62]
  • Solid oxide fuel cell Fabrication of solid oxide fuel cell (SOFC) anodes by electrophoretic deposition of NiO-YSZ composite powder [Volume 1, Issue 1, , Pages 61-70]
  • Solid oxide fuel cell Comparison of mechanical, electrical and chemical stability of BaCe0.7Zr0.1Y0.2O3-δ (BCZY7)-(Li/Na)2CO3 proton conductive composite electrolytes fabricated by mechanical mixing and infiltration methods [Volume 9, Issue 34, 2018, Pages 17-30]
  • Solid Oxide Fuel Cells Synthesizing and investigation on the electrochemical behavior of (Nd0.9La0.1)1.95Sr0.05Ni0.75Cu0.25O4-d and (Nd0.9La0.1)1.9Sr0.1Ni0.75Cu0.25O4-d cathode electrode for solid oxide fuel cell [Volume 9, Issue 33, 2018, Pages 1-12]
  • Solid State Reaction Investigation of Effect of Heat Treatment on Produced Phases in 45S5 Glass-Ceramics Synthesized in the Forms of Powder and Pellet, and Investigation of Their Bioactivity [Volume 9, Issue 34, 2018, Pages 1-16]
  • Solid state recycling Aluminum nanocrystalline powder production from aluminum alloy scrap by solid state recycling method [Volume 14, Issue 51, 2023, Pages 1-16]
  • Solvent Synthesis of Different Nanostructured Morphologies of Cadmium Selenide by Changing the Solvent in Solvothermal Process. [Volume 4, Issue 14, 2014, Pages 93-102]
  • Solvent Evaporation Hydroxyapatite - Hyaluronic acid scaffold production using solvent extraction method [Volume 10, Issue 36, 2019, Pages 133-140]
  • Solvothermal Synthesis of Different Nanostructured Morphologies of Cadmium Selenide by Changing the Solvent in Solvothermal Process. [Volume 4, Issue 14, 2014, Pages 93-102]
  • Spark plasma sintering Investigation of Mechanical Properties of Al-Al2O3 Composites Synthesized By Spark Plasma Sintering [Volume 7, Issue 26, 2016, Pages 49-58]
  • Spark plasma sintering Fabrication of AZ91D/SiC Magnesium Matrix Composite with High Particle Reinforcement Loading, Produced by Mechanical Milling of Chips and Semi-Solid Powder Processing [Volume 10, Issue 36, 2019, Pages 17-32]
  • Spark plasma sintering Electrochemical deposition of calcium phosphate coating on the Ti-10Mo-X (TiC & TiB2) composite produced by spark plasma sintering [Volume 13, Issue 48, 2022, Pages 33-52]
  • Spark plasma sintering The role of Ex-situ 0.5wt.% B4C reinforcement and later formed In–situ TiC and TiBw on microstructural evolution of Ti-10Mo mixed powder alloy [Volume 13, Issue 50, 2022, Pages 19-32]
  • Spark plasma sintering Mo diffusion and In-situ formation of reinforcement in spark plasma sintering of powder mixed Ti-10Mo-1.5B4C composite at different temperatures and holding time [Volume 14, Issue 52, 2023, Pages 1-18]
  • Spark plasma sintering Spark plasma sintering of aluminum 3000 and 5000 alloys powder obtained from recycling of Used Beverage Cans (UBCs) [Volume 14, Issue 54, 2023, Pages 17-34]
  • Spark plug Synthesis and characterization of copper based spinel coating on alumina substrate for spark plug aero-engine application [Volume 12, Issue 45, 2021, Pages 65-76]
  • Spent Brick The Effect of Sodium Hexametaphosphate on the Physical and Mechanical Properties of Monolithic Refractories Prepared from the Wastes of Magnesia - Carbon Bricks [Volume 6, Issue 22, 2016, Pages 45-54]
  • Sphalerite Aluminothermic reduction of zinc sulfide induced ball milling-Effect of ZnS:Al molar ratio on the raw mixture [Volume 9, Issue 34, 2018, Pages 31-44]
  • Spinel coating Synthesis and characterization of copper based spinel coating on alumina substrate for spark plug aero-engine application [Volume 12, Issue 45, 2021, Pages 65-76]
  • Spinel structure Investigation of Structure and Magnetic Properties of Ni Ferrite Powders Synthesized by Plasma Arc Discharge [Volume 7, Issue 28, 2016, Pages 17-26]
  • Spodumene concentrate A review on the extraction of lithium from its minerals - Case study: Lithium extraction from spodumene concentrate using sulfation roasting under ball milling conditions [Volume 11, Issue 40, 2021, Pages 75-90]
  • Spray deposition Fabrication of silver conductive lines by spray deposition method [Volume 14, Issue 53, 2023, Pages 91-102]
  • Sputtering technique The Effect of Oblique Deposition on the Magnetic Behavior of Fe-Co Alloy Thin Films Fabricated by Sputtering Technique [Volume 11, Issue 42, 2021, Pages 31-44]
  • SrTiO3 Synthesis of strontium titanate from celestite concentrate [Volume 10, Issue 37, 2019, Pages 105-118]
  • Stainless Steel Implant Improvement in Mechanical Properties of Medical Stainless Steels by Using Liquid-Phase Sintering [Volume 6, Issue 21, 2016, Pages 73-82]
  • Standoff Investigating the Effects of Heat Treatment in the Microstructure and Metallurgical Properties of the Explosive Welding of 304 Stainless Steel and CK45 Carbon Steel [Volume 7, Issue 26, 2016, Pages 19-34]
  • Steel The effect of titanium interlayer on the mechanical and structural properties of steel- tungsten diffusion bonding [Volume 8, Issue 30, 2018, Pages 105-116]
  • Steel AISI 422 Study of Phase Transformation in Martensitic Stainless Steel AISI 422 During Continuous Cooling [Volume 6, Issue 22, 2016, Pages 79-90]
  • Steel/Silicon Carbide Composite Microstructure, Hardness and Wear Resistance of the Hard Layer Containing Silicon Carbide Particles on ASTM A106 Steel Produced by GTAW Welding [Volume 6, Issue 21, 2016, Pages 121-136]
  • Steel St37 Study of Microstructure and Mechanical properties of Welded mild steel fabricated by FCAW and Compare with GMAW Process [Volume 8, Issue 30, 2018, Pages 1-14]
  • Steel-tungsten carbide joints The application of combustion synthesis reactions in Ni-Ti system in the joining of steel to tungsten carbide [Volume 11, Issue 41, 2021, Pages 103-114]
  • Step quenching heat treatment Investigation of abnormal effect of dual-phase ferritic-bainitic microstructures on modification of mechanical properties of MO40 low alloy steel in comparison with full bainitic conditions [Volume 10, Issue 37, 2019, Pages 133-148]
  • Strain rate Investigation of the Effect of Strain Rate on Tensile Properties of Polyurethane Using Eyring Model [Volume 7, Issue 25, 2016, Pages 23-30]
  • Strain rate Investigating the simultaneous role of clay nanoparticles and strain rate on the tensile behavior of polyethylene matrix nanocomposite [Volume 13, Issue 50, 2022, Pages 23-45]
  • Strength Investigating the effect of particle size on microstructure, mechanical properties and electrical conductivity of sodium beta-alumina ceramics [Volume 10, Issue 36, 2019, Pages 107-116]
  • Stress Analysis Stress and Fracture Analysis of a Fitting in Slug Catcher of Gas Refinery [Volume 7, Issue 27, 2016, Pages 95-112]
  • Stress Corrosion Cracking An Investigation on Stress Corrosion Cracking Behaviorof API-5L-X52 Steel in Near Neutral pH Solution [Volume 5, Issue 17, 2014, Pages 55-64]
  • Stress exponent Investigation of creep behavior of ME21 and MX21 magnesium alloys [Volume 9, Issue 34, 2018, Pages 93-110]
  • Stress relaxation test Investigation of gamma precipitation process under effect of strain in Nimonic80A nickel base superalloy [Volume 12, Issue 43, 2021, Pages 36-55]
  • Structural Analysis Synthesis of barium carbonate by mechanochemical method [Volume 13, Issue 48, 2022, Pages 53-72]
  • Supercapacitor Deposition of spinel cobalt nickel on nickel foam by a constant current electrochemical method and its supercapacitor application [Volume 10, Issue 35, 2019, Pages 39-48]
  • Supercapacitor Synthesis of nickel-cobalt-aluminum/graphene nanocomposite and its electrochemical performance as supercapacitor [Volume 11, Issue 42, 2021, Pages 63-80]
  • Superconductivity Synthesizing, characterizing and investigating the crystal structural, electric and magnetic properties of superconducting compound Y2Ba5Cu7Ox [Volume 10, Issue 37, 2019, Pages 163-176]
  • Superparamagnetism synthesis and Identification of superparamagnetic graphene oxide- Iron oxide nanoparticles coated by chitosan and modified by Amino acid [Volume 9, Issue 34, 2018, Pages 61-76]
  • Supersolidus sintering Gravitational Effects on Compact Shaping and Microstructure during Supersolidus Liquid Phase Sintering of Cu-10Sn-10Pb [Volume 6, Issue 23, 2016, Pages 127-138]
  • Surface adsorption Synthesis and characterization of bio-nanocomposite of FeOOH-AC and its application in the removal of methyl orange anionic dye [Volume 14, Issue 53, 2023, Pages 69-90]
  • Surface Hybrid Composite Investigation of microstructure and hardness of surface composite AA5086(H116)/ZrO2 and surface hybrid composite AA5086(H116)/ZrO2/Gr fabricated by friction stir processing [Volume 6, Issue 23, 2016, Pages 101-114]
  • Surface melting Dry sliding wear behavior of Astaloy85Mo steel surface melted by gas tungsten arc welding [Volume 7, Issue 28, 2016, Pages 27-38]
  • Surfactants The investigation of Structural and Magnetic Properties of Lanthanum and Barium Located into Multiferroic Ferrite Bismuth Nanoparticles in the Presence of Sugar Based Natural Surfactants Using Coprecipitation Approach [Volume 12, Issue 45, 2021, Pages 33-46]
  • Synthesize An Studying on the Synthesis and Densification Behavior of β''- Alumina Electrolyte for Sodium-Sulfur Batteries [Volume 6, Issue 22, 2016, Pages 137-146]
  • Synthetic rubber primer Evaluation of anti-corrosion properties of MIO pigments in the formulation of synthetic rubber based primer used in gas pipeline [Volume 8, Issue 29, 2018, Pages 109-120]

T

  • Taguchi Design Optimization of parameters for tape casting of yttria stabilized zirconia (YSZ8) by Taguchi design for electrolyte solid oxide fuel cell [Volume 7, Issue 28, 2016, Pages 47-56]
  • Taguchi experimental Design Study of optical properties, thermal behavior and thermal stability of coated PETN particles with Lithol rubine nano-pigment via ultrasonic technique using Taguchi experimental design method [Volume 10, Issue 35, 2019, Pages 63-76]
  • Taguchi Method Optimizing Parameters for Chemical Synthesis of Fe-B Alloy Nanoparticles by Taguchi Method [Volume 4, Issue 15, 2014, Pages 21-28]
  • Tantalum Prediction of Failure in Forming of Tantalum [Volume 4, Issue 15, 2014, Pages 29-38]
  • Tape Casting Optimization of parameters for tape casting of yttria stabilized zirconia (YSZ8) by Taguchi design for electrolyte solid oxide fuel cell [Volume 7, Issue 28, 2016, Pages 47-56]
  • Tea Compost Study of tea compost column biofilter efficiency to remove some heavy metal ions from aqueous solutions [Volume 7, Issue 28, 2016, Pages 67-80]
  • Temperature gradient Effect of Various Heat Treatment Conditions on Nickel Ferrite Nanoparticles and Investigating its Sensitivity to Formaldehyde [Volume 11, Issue 42, 2021, Pages 17-30]
  • Temperature‐Sensitive Hydrogel Synthesis and Characterization of Temperature‐Sensitive Hydrogel Copolymer Based on N-isopropylacrylamide for Medical Applications [Volume 7, Issue 27, 2016, Pages 15-26]
  • Tensile and buckling behavior Studying mechanical behavior of non-wrinkled phosphorene nanotubes under uniaxial loading [Volume 8, Issue 30, 2018, Pages 117-124]
  • Tensile Behavior Investigating the simultaneous role of clay nanoparticles and strain rate on the tensile behavior of polyethylene matrix nanocomposite [Volume 13, Issue 50, 2022, Pages 23-45]
  • Tensile properties Investigation of abnormal tensile behavior of DIN 16MnCr5 low carbon low alloy steel under ferrite-martensite dual-phase microstructures in comparison with full martensitic condition [Volume 11, Issue 41, 2021, Pages 17-34]
  • Tensile Test Prediction of Failure in Forming of Tantalum [Volume 4, Issue 15, 2014, Pages 29-38]
  • Tension test Tensile behavior of AZ91 alloy containing silver and under different casting conditions [Volume 13, Issue 50, 2022, Pages 60-80]
  • Texture The Effect of Twinning on Texture Evolution of AZ63 Magnesium Alloy During Hot Working [Volume 7, Issue 25, 2016, Pages 45-58]
  • Texture Effect of the power type of the general flow function in texture simulation of ECAP [Volume 12, Issue 44, 2021, Pages 13-28]
  • Thermal Analysis Effect of Cooling Rate and Grain Refining Agents on Microstructure Characteristics of Al-Cu Alloys by Computer- Aided Cooling Curve Method [Volume 6, Issue 23, 2016, Pages 75-88]
  • Thermal cycle Fracture Resistance Improvement of Micro Alloy Steel Weld in Four Wire Submerged Arc Welding by applying One and Two Thermal Cycles [Volume 6, Issue 23, 2016, Pages 115-126]
  • Thermal fatigue Effect of MCrAlY coating on crack formation during thermal fatigue testing of a directionally solidified Nickle based superalloy [Volume 13, Issue 50, 2022, Pages 81-97]
  • Thermal power plant Microbial Corrosion in Cooling Water of Lushan Shahid Beheshti Power Plant [Volume 13, Issue 49, 2022, Pages 26-15]
  • Thermal spray Effect of MoS2 Addition on High Temperature Wear Behavior of NiCrBSi Coating Produced by Thermal Spraying [Volume 14, Issue 52, 2023, Pages 61-72]
  • Thermal stability The Effect of Co Concentration on the Magnetic Properties of Obliquely Sputtered Fe–Co Thin Films [Volume 11, Issue 41, 2021, Pages 91-102]
  • Thermite Reaction Effects of Alumina Particles and Carbon Monoxide Gas Bubbles Within the Melt on the Graphite Morphology and Microstructure of Gray Cast Iron [Volume 6, Issue 22, 2016, Pages 1-12]
  • Thermodynamic Efficient Removal of Omeprazole from Water Samples by Utilizing of Carbon Nanotubes as Powerful nanoadsorbent and Comprising with Graphite: Kinetic and Thermodynamic studies [Volume 12, Issue 46, 2021, Pages 1-18]
  • Thermomechanical controlled processing (TMCP) Study on microstructure and mechanical properties of API X70 steel at various hot rolling conditions [Volume 11, Issue 41, 2021, Pages 79-90]
  • Thermomechanical treatment THE EFFECT OF MICROSTRUCTURAL CHANGES ON THE CORROSION PROPERTIES OF 310S AUSTENITIC STAINLESS STEEL AFTER THERMOMECHANICAL TREATMENT [Volume 13, Issue 47, 2022, Pages 21-38]
  • Thermoplastic elastomer Study of Mechanical and Thermal Properties of NBR/PP-Nano Clay Composite [Volume 8, Issue 31, 2018, Pages 17-28]
  • Thickness Study of Microstructure and Mechanical properties of Welded mild steel fabricated by FCAW and Compare with GMAW Process [Volume 8, Issue 30, 2018, Pages 1-14]
  • Thin Film An investigation of vanadium concentration on the optical and electrical properties of TiO2 sol-gel derived thin films [Volume 8, Issue 30, 2018, Pages 173-182]
  • Thin Film Layer Deposition, Characterization and Investigation of Photo-Electrical Properties of Nanostructured Thin Film Mg Doped ZnO by Sol-Gel Method [Volume 11, Issue 40, 2021, Pages 107-124]
  • Ti-10Mo Investigating on the microstructure of cross-section and surface of Ti-10Mo alloy produced by selective laser melting [Volume 14, Issue 53, 2023, Pages 1-20]
  • Ti-10Mo-X (TiC & TiB2) composite Electrochemical deposition of calcium phosphate coating on the Ti-10Mo-X (TiC & TiB2) composite produced by spark plasma sintering [Volume 13, Issue 48, 2022, Pages 33-52]
  • Ti2AlC Investigation on the effects of the amount and source of carbon on synthesis of Ti2AlC nanostructure by self-propagating high temperature combustion synthesis method [Volume 8, Issue 29, 2018, Pages 57-68]
  • Ti3SiC2 Investigation on the effect of Al addition on synthesis of Ti3SiC2 nanostructure by Mechanical alloying – heat treatment method [Volume 8, Issue 30, 2018, Pages 15-28]
  • Ti-6Al-4V Study of PEO on the fatigue behavior of titanium alloy Ti-6Al-4V [Volume 8, Issue 31, 2018, Pages 141-152]
  • Ti-6Al-4V alloy Investigation of corrosion resistance of Ti-6Al-4V alloy welding zone Welded by TIG method [Volume 12, Issue 44, 2021, Pages 1-12]
  • Ti-6Al-4V titanium alloy An Investigation of different parameters on the penetration depth and welding width of Ti-6Al-4V alloy by plasma arc welding [Volume 10, Issue 38, 2019, Pages 33-48]
  • Ti-6Al-4V titanium alloy Investigation of effective parameters on dissimilar infrared brazing for Ti-6Al-4Vv and SS316 L by Ag Base filler metal [Volume 11, Issue 41, 2021, Pages 1-16]
  • Ti alloys Mechanical and Physical Properties Laser and GTA Welding of Commercial Pure Titanium [Volume 4, Issue 16, 2014, Pages 71-80]
  • TiC powder The Effect of Pulsed Laser Parameters on Surface Compositing of H13-TiC [Volume 8, Issue 31, 2018, Pages 61-78]
  • TIG Dry sliding wear behavior of Astaloy85Mo steel surface melted by gas tungsten arc welding [Volume 7, Issue 28, 2016, Pages 27-38]
  • TiG welding Investigation of corrosion resistance of Ti-6Al-4V alloy welding zone Welded by TIG method [Volume 12, Issue 44, 2021, Pages 1-12]
  • Tin Dioxide Novel Synthesis of Pure and Zinc-doped Tin Dioxide by using Urea-based Solvent [Volume 10, Issue 36, 2019, Pages 83-92]
  • Tin Oxide Investigating Nanocomposite thin Film of PEDOT: PSS/SnO2 as CO gas Sensor [Volume 4, Issue 14, 2014, Pages 55-66]
  • Tin sulphide Investigation the effect of In-doping on the structural and optical properties of electrodeposited SnS thin film [Volume 8, Issue 32, 2018, Pages 43-56]
  • TiO2 Photocatalytic degradation of reactive red 198 by TiO2-activated carbon nanocomposite [Volume 7, Issue 26, 2016, Pages 35-48]
  • TiO2 nanoparticle Investigating the effect of particle size on Volume-per-atom parameter of TiO2 nanoparticles [Volume 8, Issue 29, 2018, Pages 81-90]
  • TiO2 nanoparticles The effects of TiO2 nanoparticles on physical and thermal properties of polyurethane foam and sandwich panel [Volume 8, Issue 29, 2018, Pages 91-108]
  • TiO2 nanoparticles Investigation of electrophoretic parameters of TiO2 nanoparticles for fabricating photoanode of dye sensitized solar cells [Volume 9, Issue 33, 2018, Pages 13-24]
  • TiO2 Plasma Electrolytic Oxidation Enhancement of Local Corrosion Resistance of CP-Titanium in H2SO4 Solution via Plasma Electrolytic Oxidation [Volume 6, Issue 22, 2016, Pages 127-136]
  • TiO2 powder Investigation of microstructure and mechanical properties of welding metal of A516-Gr70 steel in the presence of TiO2 by SAW method [Volume 12, Issue 45, 2021, Pages 1-20]
  • TiO2-ZrO2 Photogeneration of hydrogen from industrial wastewater containing organic pollutants by using TiO2/ZrO2 nanocomposite [Volume 9, Issue 34, 2018, Pages 147-154]
  • Tissue culture engineering Design and Synthesis of Biodegradable Nano-Glass Composite for Use in Tissue Culture Engineering [Volume 4, Issue 14, 2014, Pages 11-30]
  • Titanium Effect of MCrAlY coating on crack formation during thermal fatigue testing of a directionally solidified Nickle based superalloy [Volume 13, Issue 50, 2022, Pages 81-97]
  • Titanium A Review of the Most Important Methods for Severe Plastic Deformation of Titanium [Volume 14, Issue 52, 2023, Pages 19-41]
  • Titanium The effect of pin shape on microstructure and mechanical properties of HA-Ti surface composites produced by FSP method [Volume 14, Issue 52, 2023, Pages 73-87]
  • Titanium Alloy Study of PEO on the fatigue behavior of titanium alloy Ti-6Al-4V [Volume 8, Issue 31, 2018, Pages 141-152]
  • Titanium boride and titanium carbide Mo diffusion and In-situ formation of reinforcement in spark plasma sintering of powder mixed Ti-10Mo-1.5B4C composite at different temperatures and holding time [Volume 14, Issue 52, 2023, Pages 1-18]
  • Titanium Carbide Synthesis of MoSi2-20%TiC Nanocomposite by Method Mechanical Activated Self-Propagation Combustion Synthesis (MASHS) [Volume 7, Issue 25, 2016, Pages 71-86]
  • Titanium Carbide Effect of metallic agent on the carbothermic reduction of titanium dioxide in order to produce titanium carbide [Volume 12, Issue 44, 2021, Pages 65-82]
  • Titanium interlayer The effect of titanium interlayer on the mechanical and structural properties of steel- tungsten diffusion bonding [Volume 8, Issue 30, 2018, Pages 105-116]
  • Titanium oxide Synthesis of Fe3O4/SiO2/TiO2-Ag Core Shell Nanocomposites and Investigation of its Magnetic Properties [Volume 8, Issue 31, 2018, Pages 51-60]
  • TLP bonding Effect of temperature and time, the interlayer on microstructure and mechanical properties of Transient Liquid Phase (TLP) bonding of AISI321 stainless steel [Volume 7, Issue 28, 2016, Pages 95-112]
  • Total bacteria count Detection and Analysis of Microbial Influenced Corrosion in Cooling Tower of Shahid Mofateh Power Plant [Volume 13, Issue 50, 2022, Pages 46-59]
  • Transformation The effect of temperature on microstructure during ultra-rapid annealing of severely deformed low-carbon steel [Volume 11, Issue 40, 2021, Pages 1-12]
  • Transient Stress The Effect of Fiber Breakage Caused by Transient Shear Stress Distribution in Single-Lap Adhesive Joint Composite Material [Volume 6, Issue 21, 2016, Pages 1-18]
  • Transparency Optimizing synthesis parameters of silver nanowires by polyol method [Volume 12, Issue 45, 2021, Pages 21-32]
  • Tribological behavior Investigating the Tribological Behavior of Epoxy Matrix Composites Reinforced by Milled Fibers [Volume 6, Issue 24, 2016, Pages 51-62]
  • Tribological behavior Effect of TiC and TiB2 Reinforcement Phase Addition on Mechanical and Tribological Properties of NiAl-TiC-TiB2 Composite Produced Through Combustion Synthesis Process [Volume 12, Issue 44, 2021, Pages 41-52]
  • TRIP effect Superior improvement of tensile properties in a low alloy medium silicon DIN 1.5025 steel under single step quenching and partitioning heat treatment compared to fully martensitic conditions [Volume 11, Issue 40, 2021, Pages 59-74]
  • Twist angle Investigation of the reduction in area and twist angle effects on the strain distribution, damage and process load of vortex extrusion die [Volume 11, Issue 42, 2021, Pages 95-106]
  • Two step sintering Investigation of two step sintering on microstructure and compresive strenght of nano structured forsterite scaffold using lost foam [Volume 7, Issue 28, 2016, Pages 125-134]

U

  • Ultra-Rapid Annealing The effect of temperature on microstructure during ultra-rapid annealing of severely deformed low-carbon steel [Volume 11, Issue 40, 2021, Pages 1-12]
  • Ultrasonic Impact Treatment Effect of Ultrasonic Impact Treatment on Fatigue Behavior of Steel Welded Pipes in Petrochemical Corrosive Environment [Volume 6, Issue 21, 2016, Pages 83-96]
  • Ultrasonic method Study of optical properties, thermal behavior and thermal stability of coated PETN particles with Lithol rubine nano-pigment via ultrasonic technique using Taguchi experimental design method [Volume 10, Issue 35, 2019, Pages 63-76]
  • Ultrasonic Vibration The effect of ultrasonic vibrations on mechanical properties of low carbon steel-pure titanium bilayer sheet in incremental sheet forming process [Volume 8, Issue 32, 2018, Pages 109-124]
  • Urea Novel Synthesis of Pure and Zinc-doped Tin Dioxide by using Urea-based Solvent [Volume 10, Issue 36, 2019, Pages 83-92]

V

  • Vanadium An investigation of vanadium concentration on the optical and electrical properties of TiO2 sol-gel derived thin films [Volume 8, Issue 30, 2018, Pages 173-182]
  • Vanadium Effects of the Replacement Vanadium to Niobium at E347-16 Electrode on Micro-structure and Corrosion Behaviors of Weld Metal [Volume 11, Issue 39, 2021, Pages 31-42]
  • Vanadium carbide Application of the response surface method in optimizing the thickness and hardness of vanadium carbide coatings created by the electrolytic plasma method [Volume 9, Issue 34, 2018, Pages 111-120]
  • Varstraint test improvement of mechanical properties and hot cracking susceptibility of 304 stainless steel weld joints with the simultaneous electromagnetic vibration application [Volume 9, Issue 33, 2018, Pages 137-148]
  • Viscosity Gravitational Effects on Compact Shaping and Microstructure during Supersolidus Liquid Phase Sintering of Cu-10Sn-10Pb [Volume 6, Issue 23, 2016, Pages 127-138]
  • Viscosity Synthesis and direct ink writing of silver ink for fabricating current collecting lines of dye sensitized solar cells [Volume 13, Issue 49, 2022, Pages 41-56]
  • Volcanic Ash Neutron Absorption Properties of Geopolymeric Composite used Taftan Mountain Volcanic Ash [Volume 10, Issue 37, 2019, Pages 19-32]
  • Volume-per-atom Investigating the effect of particle size on Volume-per-atom parameter of TiO2 nanoparticles [Volume 8, Issue 29, 2018, Pages 81-90]
  • Volume Percent Ferrite Investigating the Effects of Heat Input on Corrosion Rate of Joint of Duplex Stainless Steel 2205 Weldments by GTAW Process [Volume 5, Issue 17, 2014, Pages 95-110]
  • Vortex extrusion Investigation of the reduction in area and twist angle effects on the strain distribution, damage and process load of vortex extrusion die [Volume 11, Issue 42, 2021, Pages 95-106]
  • Vortex zone Investigating the Effects of Heat Treatment in the Microstructure and Metallurgical Properties of the Explosive Welding of 304 Stainless Steel and CK45 Carbon Steel [Volume 7, Issue 26, 2016, Pages 19-34]

W

  • Wall tiles Investigating the effect of CaO/MgO ratio on the structure and final properties of wall tile bodies in rapid firing using Zanjan talc and Abbas Abad calcium carbonate as primary sources [Volume 13, Issue 49, 2022, Pages 27-40]
  • Wall tiles Investigating the effect of CaO/MgO ratio on the structure and final properties of wall tile bodies in rapid firing using the primary sources of Borujerd talc and Abbas Abad calcium carbonate as primary sources [Volume 13, Issue 50, 2022, Pages 1-18]
  • Wall tiles Investigating the effect of different sources of magnesium oxide on the structure and final properties of wall tile bodies containing CaO using rapid firing method [Volume 14, Issue 51, 2023, Pages 17-38]
  • Water quality control Microbial Corrosion in Cooling Water of Lushan Shahid Beheshti Power Plant [Volume 13, Issue 49, 2022, Pages 26-15]
  • Wear Improvement in Mechanical Properties of Medical Stainless Steels by Using Liquid-Phase Sintering [Volume 6, Issue 21, 2016, Pages 73-82]
  • Wear Investigating the effect of tungsten and heat treatment on microstructure and wear behavior of Ni-hard 4 cast iron [Volume 6, Issue 24, 2016, Pages 13-28]
  • Wear The effect of calcium carbonate particles on the wear behavior of nano-composite gear PA6/PP/Nano CaCO3 [Volume 6, Issue 24, 2016, Pages 95-106]
  • Wear investigation the mechanism of the effect of clay nanoparticles on corrosion and wear resistance properties of epoxy nanocomposite coating applied to the surface of the carbon steel substrate [Volume 7, Issue 27, 2016, Pages 113-128]
  • Wear Dry sliding wear behavior of Astaloy85Mo steel surface melted by gas tungsten arc welding [Volume 7, Issue 28, 2016, Pages 27-38]
  • Wear Fabrication and investigation of the properties of a water-based acrylic nanocomposite [Volume 8, Issue 32, 2018, Pages 97-108]
  • Wear Investigation of wear properties of Al6061 alloy and composite containing CNT produced by mechanical alloying and hot pressing process [Volume 9, Issue 33, 2018, Pages 53-66]
  • Wear Preparation and evaluation of mechanical behavior of nanostructure Ni-P/Al2O3-SiC composite coating [Volume 11, Issue 39, 2021, Pages 109-120]
  • Wear Investigating the effect of degree of dilution and interlayer on the abrasion resistance of the hard-wired coated layer of Fe-Cr-C based on SMAW method on plane carbon steel [Volume 11, Issue 40, 2021, Pages 133-32]
  • Wear Evaluation of tribological behavior of PEO composite coating containing SiO2 particles on 7075 aluminum alloy [Volume 13, Issue 49, 2022, Pages 72-85]
  • Wear Effect of MoS2 Addition on High Temperature Wear Behavior of NiCrBSi Coating Produced by Thermal Spraying [Volume 14, Issue 52, 2023, Pages 61-72]
  • Wear properties, hardness Wear Properties of Al-Gr Composites Produced Using Liquid Homogenization Followed by Cold Press-Sintering [Volume 7, Issue 26, 2016, Pages 95-104]
  • Wear Resistance, Al/SiC Composites The Effect of Milling Time and Sintering Temperature on the Microstructure and Mechanical Properties of Al/20% SiC Composite Prepared by Powder Metallurgy [Volume 6, Issue 22, 2016, Pages 147-158]
  • Welding A Survey of Mechanism and Kinetic of Oxidation of Welding Lines in Austenitic Stainless Steel AISI321 [Volume 6, Issue 21, 2016, Pages 109-120]
  • Weld Metal Toughness Determination Optimum Boron Quantity Effect on Low Temperature Impact Energy of Mild Steel Weld Metal that Fabricated by Submerge Arc Welding (SAW) [Volume 6, Issue 21, 2016, Pages 19-36]
  • Wolfram The effect of titanium interlayer on the mechanical and structural properties of steel- tungsten diffusion bonding [Volume 8, Issue 30, 2018, Pages 105-116]
  • Wurtzite Aluminothermic reduction of zinc sulfide induced ball milling-Effect of ZnS:Al molar ratio on the raw mixture [Volume 9, Issue 34, 2018, Pages 31-44]

X

  • X52 An Investigation on Stress Corrosion Cracking Behaviorof API-5L-X52 Steel in Near Neutral pH Solution [Volume 5, Issue 17, 2014, Pages 55-64]
  • X Ray Diffraction Microstructure and Mechanical Properties of Plain Low Carbon Steel Processed by Integrated Extrusion and Equal Channel Angular Pressing (Ex-ECAP) [Volume 6, Issue 22, 2016, Pages 55-64]

Y

  • YBCO The Effect of Silver Nanoparticles on AC Magnetic Susceptibility of High Temperature Y123 Superconductor [Volume 12, Issue 45, 2021, Pages 95-110]
  • YBCO family Synthesizing, characterizing and investigating the crystal structural, electric and magnetic properties of superconducting compound Y2Ba5Cu7Ox [Volume 10, Issue 37, 2019, Pages 163-176]
  • YSZ Fabrication of solid oxide fuel cell (SOFC) anodes by electrophoretic deposition of NiO-YSZ composite powder [Volume 1, Issue 1, , Pages 61-70]

Z

  • Zeta Process An Studying on the Synthesis and Densification Behavior of β''- Alumina Electrolyte for Sodium-Sulfur Batteries [Volume 6, Issue 22, 2016, Pages 137-146]
  • Zinc aluminum sulfide Aluminothermic reduction of zinc sulfide induced ball milling-Effect of ZnS:Al molar ratio on the raw mixture [Volume 9, Issue 34, 2018, Pages 31-44]
  • Zinc-doped Tin Dioxide Novel Synthesis of Pure and Zinc-doped Tin Dioxide by using Urea-based Solvent [Volume 10, Issue 36, 2019, Pages 83-92]
  • Zinc Metal Coating Investigation of Zinc metallic coating properties formed on low carbon steel in alkaline and sulfate electrolytes by plasma electrolytic saturation [Volume 6, Issue 23, 2016, Pages 1-18]
  • Zinc Oxide Synthesis and Investigation of Optical and Photocatalytic properties of ZnO nanoparticles co-doped with Ti/Si [Volume 8, Issue 32, 2018, Pages 71-82]
  • Zinc Oxide Deposition, Characterization and Investigation of Photo-Electrical Properties of Nanostructured Thin Film Mg Doped ZnO by Sol-Gel Method [Volume 11, Issue 40, 2021, Pages 107-124]
  • Zinc Oxide dye Investigating the effect of using colors containing copper oxide and zinc oxide (zinc-rich) on microbial corrosion behavior of sewage pipes [Volume 10, Issue 35, 2019, Pages 15-26]
  • Zinc Phosphate Coating A Study on the Effect of Mechanical Activating of Plain Carbon Steel Surface on the Protection Properties of Applied Zinc Phosphate Coating and Paint Adhesion Improvement [Volume 4, Issue 15, 2014, Pages 51-66]
  • Zinc Phosphate primer The influence of two types of nano-structured Ni-P and zinc-phosphate primer on the corrosion resistance of painted low carbon steel [Volume 10, Issue 36, 2019, Pages 33-50]
  • Zirconium Effect of Aluminum Content in Pack Cementation Mixture on Microstructure and Cyclic Oxidation Performance of Zr-modified Aluminide Coatings [Volume 6, Issue 23, 2016, Pages 19-30]
  • Zirconium Carbide Effect of pH on Production Process and Characteristics of Zirconium Carbide Nano Particles Synthesized by Sol-Gel Method [Volume 7, Issue 25, 2016, Pages 1-12]
  • Zirconium Diboride Effect of Milling Speed on Fabrication Al2O3-ZrB2 in Situ Nano-Composite Powder Via Mechanochemical Synthesis [Volume 4, Issue 15, 2014, Pages 39-50]
  • Zirconium Diboride Synthesis of Zirconium Diboride Via Carbothermal, Borothermal, and Borocarbothermal Activation Methods [Volume 6, Issue 22, 2016, Pages 169-180]
  • Ziziphus spina-christi leaf Evaluation of corrosion inhibition effect of hybrid organic Ziziphus spina-christi leaf extract and zinc sulfate corrosion inhibitor on mild steel in saline solutions [Volume 13, Issue 47, 2022, Pages 53-70]
  • Zn-MOC Optimization of Photocatalytic Degradation of Cephalexin Drug Contaminant from Aqueous Solutions by Synthesized Zn-MOC Nanostructures Using Response Surface Methodology [Volume 12, Issue 43, 2021, Pages 94-108]
  • ZnO Synthesis and Characterization of ZnO Nanocrystal Composites with High Surface Area Supported on Silica-Alumina Matrix by Sol-gel [Volume 4, Vol.4/No.13/Autumn 2013, 2014, Pages 1-12]
  • Zn recovery Investigation of leaching of zinc from oxide waste using citric acid [Volume 9, Issue 33, 2018, Pages 89-96]
  • ZSM-5 zeolite Investigation onthe effect of both Content and Type of Carbon on Low Temperature Synthesis of SiC by Using Magnesiothermal Reduction Process [Volume 5, Issue 17, 2014, Pages 111-126]